Electrical and Instrumentation Study Guide
Electrical
1153and
_ Technical
Instrumentation
Exam Review.pdf
Study Guide
Electrical
1153and
_ Technical
Instrumentation
Exam Review.pdf
Study Guide 1153 _ Technical Exam Review.pdf
Electrical and
Instrumentation
Study Guide 1153 |
Technical Exam
Review
Electrical and Instrumentation Study Guide
Electrical
1153and
_ Technical
Instrumentation
Exam Review.pdf
Study Guide
Electrical
1153and
_ Technical
Instrumentation
Exam Review.pdf
Study Guide 1153 _ Technical Exam Review.pdf
,Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf
psia=psig+atmospheric pressure The relationship between absolute pressure and gauge pressure is expressed
as__________.
Isolate a pressure-sensing element from rapid pressure The purpose of a snubber is to___________.
changes
The actual quantity of fluid that passes a given point per The definition of the term flow is____________.
unit of time
50 A pressure gauge that measures psig indicates a reading of 35.3. The local
atmosphere pressure is 14.7 psi. The absolute pressure that corresponds to the
psig reading is_________psia.
Separate the pressure element from the corrosive fluid of The purpose of an isolation diaphragm is to ____________.
the process
212 degrees F The boiling point of water on the Fahrenheit scale at sea level is _________.
The metals harden if exposed to extremely high The main disadvantage associated with bimetallic thermometers is that_____________.
temperatures
Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf
, Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf
The ratio of the weight of a substance to the weight of an Specific gravity is defined as__________.
equal volume of water at 60 degree F
Differential pressure To measure flow rate, orifice plates can be installed to create_____________.
Magnetic type float device To measure the levels of caustic liquids and acids, a_______ is commonly used.
Dipstick The type of instrument used to measure level directly up to approximately 20 feet
is a ____________.
158 degree F Convert 70 degree C to degrees Fahrenheit.
33.33 degree C Convert 92 degrees Celsius
Venturi Tube Which restriction type flow measuring device is considered to be the most
accurate?
Provide a means of determining differential pressure An orifice plate is used to ___________.
8 The pressure exerted by a solid block weighing 24 pounds with a bottom surface
area of 3 square inches is ___________psi.
Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf
Electrical
1153and
_ Technical
Instrumentation
Exam Review.pdf
Study Guide
Electrical
1153and
_ Technical
Instrumentation
Exam Review.pdf
Study Guide 1153 _ Technical Exam Review.pdf
Electrical and
Instrumentation
Study Guide 1153 |
Technical Exam
Review
Electrical and Instrumentation Study Guide
Electrical
1153and
_ Technical
Instrumentation
Exam Review.pdf
Study Guide
Electrical
1153and
_ Technical
Instrumentation
Exam Review.pdf
Study Guide 1153 _ Technical Exam Review.pdf
,Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf
psia=psig+atmospheric pressure The relationship between absolute pressure and gauge pressure is expressed
as__________.
Isolate a pressure-sensing element from rapid pressure The purpose of a snubber is to___________.
changes
The actual quantity of fluid that passes a given point per The definition of the term flow is____________.
unit of time
50 A pressure gauge that measures psig indicates a reading of 35.3. The local
atmosphere pressure is 14.7 psi. The absolute pressure that corresponds to the
psig reading is_________psia.
Separate the pressure element from the corrosive fluid of The purpose of an isolation diaphragm is to ____________.
the process
212 degrees F The boiling point of water on the Fahrenheit scale at sea level is _________.
The metals harden if exposed to extremely high The main disadvantage associated with bimetallic thermometers is that_____________.
temperatures
Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf
, Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf
The ratio of the weight of a substance to the weight of an Specific gravity is defined as__________.
equal volume of water at 60 degree F
Differential pressure To measure flow rate, orifice plates can be installed to create_____________.
Magnetic type float device To measure the levels of caustic liquids and acids, a_______ is commonly used.
Dipstick The type of instrument used to measure level directly up to approximately 20 feet
is a ____________.
158 degree F Convert 70 degree C to degrees Fahrenheit.
33.33 degree C Convert 92 degrees Celsius
Venturi Tube Which restriction type flow measuring device is considered to be the most
accurate?
Provide a means of determining differential pressure An orifice plate is used to ___________.
8 The pressure exerted by a solid block weighing 24 pounds with a bottom surface
area of 3 square inches is ___________psi.
Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf Electrical and instrumentation study guide 1153.pdf
