DFW ARFF Class Test with all Correct & 100% Verified
Answers |Actual Complete Update |Already Graded A+
The Critical Rescue and Fire Fighting Access Area (CRFFAA) is a rectangle surrounding any
runway that extends how many feet beyond each end of the runway?
A. 500 feet
B. 1075 feet
C. 1650 feet
D. 3300 feet ✔Correct Answer-3,300 feet
In the US, the radio-controlled system that can be used to adjust runway and other airport
lighting via specific aeronautical radio frequency is called
A. Pilot-Controlled Lighting
B. aeronautic radio lighting
C. ATC Radio Controlled Lighting (ATCRCL)
D. Aircraft Radio Control of Airdrome Lighting (ARCAL) ✔Correct Answer-Pilot-controlled
lighting
Markings that use two side-by-side alternating dashed white lines to define the edge of the
vehicle roadway are called:
A. Hold markings
B. Edge Markings
C. Zipper markings
D. Envelope markings ✔Correct Answer-zipper markings
Which factor is MOST important to consider when determining response routes for apparatus
and fuel drainage direction when a spill occurs?
A. Wind Speed
B. Airport Topography
C. Location of terminals
D. Distance to mutual aid ✔Correct Answer-Airport topography
According to NFPA 403, what two areas for emergency response should be identified on the grid
map used by ARFF personnel?
A. Daily Traffic Pattern (DTP) and Runway End Safety Areas (RESA)
B. Rapid Response Area (RRA) and Critical Rescue and Fire Fighting Access Areas (CRFFAA)
C. On Airport Response Patterns (OARP) and Mutual Aid Response Patterns ✔Correct Answer-
Rapid Response Area (RRA) and Critical Rescue and Fire Fighting Access Areas (CRFFAA)
What color airport lights are used to outline the edges of runways, to identify runway
centerlines, and to denote vehicular traffic areas on ramps?
A. Blue
, B. Green
C. White
D. Yellow ✔Correct Answer-White
Wells, drafting pits, pumps, storage tanks, water distribution mains, and fire hydrants are
examples of which type of water supply?
A. Mobile water supply
B. Fixed system water supply
C. Pre-designated water supply
D. Automatic distribution water supply ✔Correct Answer-Fixed system water supply
If extinguishers are brought to the servicing area prior to the refueling operation, they should be
stationed within 100 feet of the aircraft being serviced and should be kept:
A. upwind
B. crosswind
C. downwind
D. out of the wind ✔Correct Answer-upwind
The flight path that is parallel to the landing runway in the direction opposite to landing is called
the:
A. Base leg
B. Crosswind leg
C. Downwind leg
D. Final Approach leg ✔Correct Answer-Downwind leg
Which hold position marking consist of four yellow lines- two solid and two dashed- which
extend across the entire width of the taxiway before a runway?
A. Taxiway divider hold marking
B. Runway hold position marking
C. Inclement weather hold area marking
D. Non-movement area boundary marking ✔Correct Answer-Runway hold position marking
There is always a difference of ___________ degrees between the opposite ends of the same
runway.
A. 45
B. 90
C. 180
D. 360 ✔Correct Answer-180
How far apart should edge markers be placed on airport roadways where heavy snow may
accumulate and obscure road/terrain interfaces?
A. 10 feet
B. 30 feet
C. 50 feet
Answers |Actual Complete Update |Already Graded A+
The Critical Rescue and Fire Fighting Access Area (CRFFAA) is a rectangle surrounding any
runway that extends how many feet beyond each end of the runway?
A. 500 feet
B. 1075 feet
C. 1650 feet
D. 3300 feet ✔Correct Answer-3,300 feet
In the US, the radio-controlled system that can be used to adjust runway and other airport
lighting via specific aeronautical radio frequency is called
A. Pilot-Controlled Lighting
B. aeronautic radio lighting
C. ATC Radio Controlled Lighting (ATCRCL)
D. Aircraft Radio Control of Airdrome Lighting (ARCAL) ✔Correct Answer-Pilot-controlled
lighting
Markings that use two side-by-side alternating dashed white lines to define the edge of the
vehicle roadway are called:
A. Hold markings
B. Edge Markings
C. Zipper markings
D. Envelope markings ✔Correct Answer-zipper markings
Which factor is MOST important to consider when determining response routes for apparatus
and fuel drainage direction when a spill occurs?
A. Wind Speed
B. Airport Topography
C. Location of terminals
D. Distance to mutual aid ✔Correct Answer-Airport topography
According to NFPA 403, what two areas for emergency response should be identified on the grid
map used by ARFF personnel?
A. Daily Traffic Pattern (DTP) and Runway End Safety Areas (RESA)
B. Rapid Response Area (RRA) and Critical Rescue and Fire Fighting Access Areas (CRFFAA)
C. On Airport Response Patterns (OARP) and Mutual Aid Response Patterns ✔Correct Answer-
Rapid Response Area (RRA) and Critical Rescue and Fire Fighting Access Areas (CRFFAA)
What color airport lights are used to outline the edges of runways, to identify runway
centerlines, and to denote vehicular traffic areas on ramps?
A. Blue
, B. Green
C. White
D. Yellow ✔Correct Answer-White
Wells, drafting pits, pumps, storage tanks, water distribution mains, and fire hydrants are
examples of which type of water supply?
A. Mobile water supply
B. Fixed system water supply
C. Pre-designated water supply
D. Automatic distribution water supply ✔Correct Answer-Fixed system water supply
If extinguishers are brought to the servicing area prior to the refueling operation, they should be
stationed within 100 feet of the aircraft being serviced and should be kept:
A. upwind
B. crosswind
C. downwind
D. out of the wind ✔Correct Answer-upwind
The flight path that is parallel to the landing runway in the direction opposite to landing is called
the:
A. Base leg
B. Crosswind leg
C. Downwind leg
D. Final Approach leg ✔Correct Answer-Downwind leg
Which hold position marking consist of four yellow lines- two solid and two dashed- which
extend across the entire width of the taxiway before a runway?
A. Taxiway divider hold marking
B. Runway hold position marking
C. Inclement weather hold area marking
D. Non-movement area boundary marking ✔Correct Answer-Runway hold position marking
There is always a difference of ___________ degrees between the opposite ends of the same
runway.
A. 45
B. 90
C. 180
D. 360 ✔Correct Answer-180
How far apart should edge markers be placed on airport roadways where heavy snow may
accumulate and obscure road/terrain interfaces?
A. 10 feet
B. 30 feet
C. 50 feet
