FOA Certification Study Guide with 100% Correct Answers

FOA Certification Study Guide with 100% Correct Answers Which fiber optic connector may be used according to the EIA/TIA 568 cabling standard? Correct Answer: Any connector with a FOCIS standards document What UTP Cat 3, Cat 5e, and Cat 6 or Class D, E, and F rating indicate? Correct Answer: The Performance level of unshielded twisted pair cable Commercial phone systems (not VoIP but POTS) traditionally use multipair UTP cables for backbone connections with _running_____used in the telecom closet for connections to horizontal cables running to the desktop. Correct Answer: 66 Punchdown blocks TIA Cat 5e or "enhanced Cat 5' cable or ISO/IEC Class D cable was introduced to support the needs of what the computer network? Correct Answer: Gigabet Ethernet For certifying Cat 5e/Class D Performance, installed cables are tested at ________. Correct Answer: 100 MHz Category 6/Class E cabling is specified and must be tested during certification to _______MHz. Correct Answer: 250 MHz A copper time domain reflectometer (TDR) can be used to find_________. Correct Answer: All of these When terminating Cat5e/6 or Class D/E UTP cabling, what must be remembered to maintain the performance of the installed cable? Correct Answer: Keep the pairs twisted to within 1/2 inch of the termination Which punchdown block is more often used with multipair cables for POTS (plain old telephone service) connections? Correct Answer: Bix block Standards are written by manufacturers as minimum specifications to ensure interoperability among various manufacturer's products. Correct Answer: True While video surveillance systems traditionally used coax cable, they can use UTP in a structured cabling system or fiber optics also. Correct Answer: True Gigabit and faster networks only work fiber optics. Correct Answer: False Fiber optic installations do not require inspection for compliance to local building or electrical codes since they do not contain copper wires. Correct Answer: False The US National Electrical Code (NEC) requires removal of all "abandoned" communications cabling for fire safety. Correct Answer: True