NEIEP 800 FINAL COMPREHENSIVE STUDY
GUIDE WITH SOLUTIONS
◉ A _____ lowering valve allows the car to be lowered at a speed not
exceeding 20fpm in case of power failure.
Answer: manual
◉ As the oil temperature changes, the _____ will change as well and
will effect the performance, more specifically, the leveling and
approach of the elevator.
Answer: viscosity
◉ Be sure wellways are properly _____ to avoid accidental injury to
you, your team or anyone working outside of our industry.
Answer: barricaded
◉ Barricades around the wellway must be _____ inches high and be
capable of withstanding a _____lb force.
Answer: 42, 200
◉ A _____ protects you if you come in contact with a hot wire or
component and then come in contact with ground. It opens the
circuit and diverts the supplied current to ground.
, Answer: GFCI
◉ A _____ _____ is useful for horizontal (side-to-side) pulling of the
truss while being lowered into the wellway.
Answer: lever hoist
◉ Code specifies the use of anti-slide devices if the outer edge of the
deck is greater than _____ inches from the center line of the handrail.
Answer: 12
◉ (True/False) Anti-slide devices must be less than 3/4" in height,
have no sharp corners or edges and fastened to the deck no closer
than 4 inches from the handrail and spaced no greater than 6ft
apart.
Answer: True
◉ Sometimes referred to as sag switches, _____ _____ switches are
located within the step band of both upper and lower truss
assemblies and function to prevent a step that is sagging by more
than _____ inch.
Answer: step level, 1/8
◉ Per code, an installed escalator can exceed the 30 degree angle of
inclination by _____ degree.
GUIDE WITH SOLUTIONS
◉ A _____ lowering valve allows the car to be lowered at a speed not
exceeding 20fpm in case of power failure.
Answer: manual
◉ As the oil temperature changes, the _____ will change as well and
will effect the performance, more specifically, the leveling and
approach of the elevator.
Answer: viscosity
◉ Be sure wellways are properly _____ to avoid accidental injury to
you, your team or anyone working outside of our industry.
Answer: barricaded
◉ Barricades around the wellway must be _____ inches high and be
capable of withstanding a _____lb force.
Answer: 42, 200
◉ A _____ protects you if you come in contact with a hot wire or
component and then come in contact with ground. It opens the
circuit and diverts the supplied current to ground.
, Answer: GFCI
◉ A _____ _____ is useful for horizontal (side-to-side) pulling of the
truss while being lowered into the wellway.
Answer: lever hoist
◉ Code specifies the use of anti-slide devices if the outer edge of the
deck is greater than _____ inches from the center line of the handrail.
Answer: 12
◉ (True/False) Anti-slide devices must be less than 3/4" in height,
have no sharp corners or edges and fastened to the deck no closer
than 4 inches from the handrail and spaced no greater than 6ft
apart.
Answer: True
◉ Sometimes referred to as sag switches, _____ _____ switches are
located within the step band of both upper and lower truss
assemblies and function to prevent a step that is sagging by more
than _____ inch.
Answer: step level, 1/8
◉ Per code, an installed escalator can exceed the 30 degree angle of
inclination by _____ degree.