CWB Exam Bundle Questions and Answers 100% correct

The Pacifica all-wheel drive has an increased ride height of? - ANSWER-0.78 inches The Pacifica Hybrid has four types of airbags. Which of the following is found in all three rows? - ANSWER-Side-curtain Which feature is newly standard on the 300S? - ANSWER-Red S exterior appearance What is ...

2. Select the cutting process that would provide the narrowest heat affected zone when cutting 12.5 mm (0.5 in) thick carbon steel. a) Oxy-acetylene cutting. b) Air-carbon arc cutting. c) Oxy-propane cutting. d) Plasma arc cutting. e) Laser beam cutting - ANSWER-e) Laser beam cutting 3. ...

The CSA is one organization accredited by the Standards Council of Canada for developing standards related to joining and inspection. Name another one. - ANSWER-Canadian General Standards Board (CGSB) Which Canadian standard includes ferrous and non-ferrous materials with notch toughness and incl...

To measure the strength of a welded joint what mechanical test would you prescribe? a) A transverse weld tension test. b) A charpy test. c) A CTOD test. d) An all weld metal tension test. e) A side bend test. - ANSWER-a) A transverse weld tension test. Select the cutting process that wou...

joint -ANSWER-the junction of the workpieces that are to be joined supplementary welding symbols -ANSWER-____ ___ are used to provide complementary information to the basic elements of a basic welding symbol weld symbol -ANSWER-a symbol that designates each type of weld, it is drawn in contact...

To increase melting rate (burn-off rate) in the shielded metal arc welding (SMAW) process, which polarity should be used? A) DCEP B) ACEP C) DCEN D) ACEP - ANSWER-C) DCEN Which type of welding power source is used for the SMAW process? A) Constant Current B) Constant Voltage C) Pulsed Cu...

The Ellingham diagram (a) is a plot of thermal conductivity against temperature, (b) shows the free energy of oxide formation against temperature. (c) shows the rate of oxidation of metals against temperature. - ANSWER-(b) True or False? A metal with a high negative free energy of oxide forma...

CSA Standard W47.1 provides the requirements that must be met and adhered to by a company seeking certification. True or False? - ANSWER-True Certification can be considered as an approval of the products fabricated by a certificated company? True or false?! - ANSWER-False What does "class...

Match the symbols to the description. - ANSWER-1a - materials that cause toxic effects 1b - compressed gas 1c - materials that cause immediate toxic effects 1d - flammable and combustible 2a - organisms that may cause infectious diseases 2b - oxidizing materials, that will cause another burn ...

Welding is a joining process that by definition requires: - ANSWER-The application of either heat or pressure The duty cycle of a welding power supply is based upon delivering its rated output for a given number of minutes. Which of the following statements is correct. A. a 300 amp/60% duty cy...

Spray, globular and short-circuiting are terms used in GMAW welding to describe - ANSWER-mode of metal transfer through the arc The usable position for GMAW wires is not specified in the classification because it depends on: - ANSWER-a. the shielding gas b. the wire diameter c. the mode of meta...