1
CIP LEVEL 1 Questions with Answers (100% Correct
Answers)
ISO 8504-3 is the standard for which of the following? Answer: Solvent
Cleaning
Hand and Power tool Cleaning
solvent cleaners Answer: Organic Alkaline Acidic & Emulsion Cleaner
also Water & Detergent
Organic Cleaners Cannot Remove the following: Answer: Inorganic
materials such as Chlorides,Sulfates, weld Flux & mil scale
Organic Solvents cleans metal by : Answer: Dissolving and diluting
the oil and grease contaminants on the surface
Alkaline Cleaners clean by : Answer: Wetting, emulsifying, dispersing,
and dissolving containments
Acidic Cleaners are limited to effect but highly effective to: Answer:
Acid cleaners are limited effectiveness on removing grease and oil
© 2025 All rights reserved
, 2
from surfaces but very effective at removing mill scale and rust from
steel
Detergents work by: Answer: Wetting, emulsifying, dispersing the
contaminants, which are then washed away with hot water or stream
Emulsion Cleaners Answer: Are formulated to spray surface like
detergents,emulsify,disperse, and float contaminants to the surface of
the substrate
Fresh Water (Used in Conjunction with Steam Cleaning or Pressure
Washing) Answer: Is a powerful solvent itself that can effectively clean
surfaces
Wipe test is use for ? Answer: To detect any remaining residue on
clean surfaces.
Ultraviolet (UV) Light Test is ? Answer: Use to detect oil or grease in
small quantities on cleaned surfaces.
What is a Water Break Test ? Answer: It's a test used to detect oil on
the surface if oil is present it will form droplets or large blotchy areas
© 2025 All rights reserved
CIP LEVEL 1 Questions with Answers (100% Correct
Answers)
ISO 8504-3 is the standard for which of the following? Answer: Solvent
Cleaning
Hand and Power tool Cleaning
solvent cleaners Answer: Organic Alkaline Acidic & Emulsion Cleaner
also Water & Detergent
Organic Cleaners Cannot Remove the following: Answer: Inorganic
materials such as Chlorides,Sulfates, weld Flux & mil scale
Organic Solvents cleans metal by : Answer: Dissolving and diluting
the oil and grease contaminants on the surface
Alkaline Cleaners clean by : Answer: Wetting, emulsifying, dispersing,
and dissolving containments
Acidic Cleaners are limited to effect but highly effective to: Answer:
Acid cleaners are limited effectiveness on removing grease and oil
© 2025 All rights reserved
, 2
from surfaces but very effective at removing mill scale and rust from
steel
Detergents work by: Answer: Wetting, emulsifying, dispersing the
contaminants, which are then washed away with hot water or stream
Emulsion Cleaners Answer: Are formulated to spray surface like
detergents,emulsify,disperse, and float contaminants to the surface of
the substrate
Fresh Water (Used in Conjunction with Steam Cleaning or Pressure
Washing) Answer: Is a powerful solvent itself that can effectively clean
surfaces
Wipe test is use for ? Answer: To detect any remaining residue on
clean surfaces.
Ultraviolet (UV) Light Test is ? Answer: Use to detect oil or grease in
small quantities on cleaned surfaces.
What is a Water Break Test ? Answer: It's a test used to detect oil on
the surface if oil is present it will form droplets or large blotchy areas
© 2025 All rights reserved
