1
Rhode Island Boating License Test Questions with
Answers (100% Correct Answers
Bow Answer: Front of boat
Port Answer: Left side of boat
Starboard Answer: Right side of boat
Stern Answer: Rear of a boat
Cleat Answer: Metal fitting where a rope can be fastened
Gunwale Answer: Upper edge of a boat's side
Beam Answer: Maximum width of a vessel
Freeboard Answer: Distance from water to lowest point of the boat
where water could come on board
Draft Answer: Depth of water needed to float vessel
Keel Answer: Main centerline (backbone) of vessel or extension of hull
that increases stability in water
© 2025 All rights reserved
, 2
Displacement Hulls Answer: Move through water by pushing water
aside, are designed to cut through water - if lower a boat into the
water, some of the water moves for the boat - if you could weigh that
displaced water, you'd find it equals the weight of the boat.
Displacement hulls limited to slower speeds, round bottoms.
Hull Answer: Body of vessel, basic structure or shell
Planing Hulls Answer: Rise up, glide on water, can skim along at high
speeds, usually flat bottom and vee bottoms
Personal Watercraft (PWC) Answer: Small vessel, inboard jet drive
Plowing Mode of Planning Hull Answer: As speed increases, planing
hull will have raised bow, reducing operators vision and throwing
large wake.
Flat Bottom Hull Answer: Planing hull, has shallow draft, good for
fishing in small lakes and rivers, rides roughly in choppy water
Deep Vee Hull Answer: Planing hull, gives smoother ride than a flat
bottom hull through rough water, takes more power to move
© 2025 All rights reserved
Rhode Island Boating License Test Questions with
Answers (100% Correct Answers
Bow Answer: Front of boat
Port Answer: Left side of boat
Starboard Answer: Right side of boat
Stern Answer: Rear of a boat
Cleat Answer: Metal fitting where a rope can be fastened
Gunwale Answer: Upper edge of a boat's side
Beam Answer: Maximum width of a vessel
Freeboard Answer: Distance from water to lowest point of the boat
where water could come on board
Draft Answer: Depth of water needed to float vessel
Keel Answer: Main centerline (backbone) of vessel or extension of hull
that increases stability in water
© 2025 All rights reserved
, 2
Displacement Hulls Answer: Move through water by pushing water
aside, are designed to cut through water - if lower a boat into the
water, some of the water moves for the boat - if you could weigh that
displaced water, you'd find it equals the weight of the boat.
Displacement hulls limited to slower speeds, round bottoms.
Hull Answer: Body of vessel, basic structure or shell
Planing Hulls Answer: Rise up, glide on water, can skim along at high
speeds, usually flat bottom and vee bottoms
Personal Watercraft (PWC) Answer: Small vessel, inboard jet drive
Plowing Mode of Planning Hull Answer: As speed increases, planing
hull will have raised bow, reducing operators vision and throwing
large wake.
Flat Bottom Hull Answer: Planing hull, has shallow draft, good for
fishing in small lakes and rivers, rides roughly in choppy water
Deep Vee Hull Answer: Planing hull, gives smoother ride than a flat
bottom hull through rough water, takes more power to move
© 2025 All rights reserved
