1
FMEA: FAILURE MODE EFFECT ANALYSIS
Questions with Answers (100% Correct Answers)
Failure Mode Effect Analysis Answer: FMEA
FMEA (Failure Mode Effect Analysis) Answer: It is a procedure in
product development and operations management for analysis of
potential failure modes within a system for classification by the
severity and likelihood of the failures.
Failure Modes Answer: Any errors or defects in a process, design, or
item, especially those that affect the customer, can be potential or
actual.
Effects Analysis Answer: Refers to studying the consequences of those
failures.
Failure Answer: The loss of an intended function of a device under
stated conditions.
Failure Mode Answer: The manner by which a failure is observed
Failure Mode Answer: It generally describes the way the failure
occurs.
© 2025 All rights reserved
, 2
Failure Effect Answer: Immediate consequences of a failure on
operation, function or functionality, or status of some item.
Failure Cause Answer: Defects in design, process, quality, or part
application, which are the underlying cause of the failure or which
initiate a process that leads to failure.
Severity Answer: The consequences of a failure mode.
Severity Answer: It considers the worst potential consequence of a
failure, determined by the degree of injury, property damage, or
system damage that could ultimately occur.
FMECA Answer: Procedures for conducting ? were described in the
US Armed Forces Military Procedures document MIL-P-1629
MIL-P-1629 Answer: Procedures for conducting FMECA were
described in the US Armed Forces Military Procedures document?
NASA Answer: By the early 1960s, contractors for ? were using
variations of FMECA or FMEA under a variety of names.
Civil aviation industry Answer: was an early adopter of FMEA
© 2025 All rights reserved
FMEA: FAILURE MODE EFFECT ANALYSIS
Questions with Answers (100% Correct Answers)
Failure Mode Effect Analysis Answer: FMEA
FMEA (Failure Mode Effect Analysis) Answer: It is a procedure in
product development and operations management for analysis of
potential failure modes within a system for classification by the
severity and likelihood of the failures.
Failure Modes Answer: Any errors or defects in a process, design, or
item, especially those that affect the customer, can be potential or
actual.
Effects Analysis Answer: Refers to studying the consequences of those
failures.
Failure Answer: The loss of an intended function of a device under
stated conditions.
Failure Mode Answer: The manner by which a failure is observed
Failure Mode Answer: It generally describes the way the failure
occurs.
© 2025 All rights reserved
, 2
Failure Effect Answer: Immediate consequences of a failure on
operation, function or functionality, or status of some item.
Failure Cause Answer: Defects in design, process, quality, or part
application, which are the underlying cause of the failure or which
initiate a process that leads to failure.
Severity Answer: The consequences of a failure mode.
Severity Answer: It considers the worst potential consequence of a
failure, determined by the degree of injury, property damage, or
system damage that could ultimately occur.
FMECA Answer: Procedures for conducting ? were described in the
US Armed Forces Military Procedures document MIL-P-1629
MIL-P-1629 Answer: Procedures for conducting FMECA were
described in the US Armed Forces Military Procedures document?
NASA Answer: By the early 1960s, contractors for ? were using
variations of FMECA or FMEA under a variety of names.
Civil aviation industry Answer: was an early adopter of FMEA
© 2025 All rights reserved
