Mosby CT Registry Review 2025
Questions and Answers
What is the smallest component of a digital image - --CORRECT ANSWER--
pixel
How many CT numbers are assigned to each pixel in the image matrix? - --
CORRECT ANSWER--One
In a CT image, the CT number - --CORRECT ANSWER--Of a material is
dependent on its linear attenuation coefficient
Each two-dimensional square of data that make up the CT image is called a - --
CORRECT ANSWER--pixel
What is an element of the digital image - --CORRECT ANSWER--pixel
Which of the following influences the spatial resolution in cardiac CT imaging - --
CORRECT ANSWER--*detector size
*reconstruction interval
*pitch
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 1
,As patient motion increases spatial resolution decreases - --CORRECT ANSWER-
-TRUE
Which is an advantage of using a small focal spot - --CORRECT ANSWER--
increased spatial resolution
Increasing the CT image matrix from 256x256 to 512x512 will likely improve? - --
CORRECT ANSWER--High-contrast spatial resolution
The practical limiting spatial resolution of a CT scanner is 3.6 lp/cm. What size
object does this correspond to? - --CORRECT ANSWER--1.4 mm
Use of a bone filter, as opposed to a soft tissue filter, to reconstruct CT images
would likely improve? - --CORRECT ANSWER--Spatial resolution
The spatial resolution of a typical CT scanner is on the order of? - --CORRECT
ANSWER--1 mm
A 512 x 512 matrix CT image over a 30-cm field of view could show a spatial
resolution of no better than ? lp/cm? - --CORRECT ANSWER--8.5
When comparing a 512x512 matrix to a 1024x1024 matrix, the 1024x1024 matrix?
- --CORRECT ANSWER--Contains four times as many pixels: 1024 x 1024
=1048576 then 512 x 512= 262144...then divide 1048576 /262144 = 4
High contrast spatial resolution and low contrast resolution are typically measured
baseline and ? thereafter - --CORRECT ANSWER--Biannually
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 2
,To improve the high contrast spatial resolution of a CT study, one would increase
_____ while keeping all other factors the same. - --CORRECT ANSWER--Matrix
size (128x128 to 512x512)
A radiologist wants to improve the high-contrast spatial resolution of anatomy
which he/she is examining by CT. The change which would best lead to this
improvement is - --CORRECT ANSWER--Increase the matrix size
To improve the high-contrast spatial resolution of a CT study, one could increase ?
while keeping all other factors the same? - --CORRECT ANSWER--Matrix size
A voxel contains 25% air, 50% water and 25% bone. The CT number for this
voxel would be expected to be _____ HU? - --CORRECT ANSWER--0
How many pixels are contained in a 1,024 matrix image? - --CORRECT
ANSWER--D. 1,048,576
MATH 1024 X1024
It is located in a matrix and is a two dimensional representation of a voxel - --
CORRECT ANSWER--pixel
When CT numbers are calculated for voxels (volume elements) of tissue what is
assigned the calculated number and a subsequent shade of gray - --CORRECT
ANSWER--pixel
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 3
, What is defined as a picture element or the smallest component of the digital image
- --CORRECT ANSWER--pixel
A CT scan produces a 512x512 matrix transverse image of a 30 cm diameter FOV.
Each pixel is approximately _____ mm on a side. - --CORRECT ANSWER--0.6
equation: 30cm/512= .058cm convert to mm and its .58 which is approximately
0.6
The ability of a system to define small objects distinctly is referred to as which of
the following? - --CORRECT ANSWER--spatial resolution
Which of the following terms is/are commonly used to describe a CT scanner's
ability to differentiate objects with similar linear attenuation coeffiecents - --
CORRECT ANSWER--*spatial resolution
*sensitivity
Which of the following factors have an affect on contrast resolution - --
CORRECT ANSWER--*patient size
*slice thickness
*pixel size
*mAs/dose
As mAs/dose increases contrast resolution decreases - --CORRECT ANSWER--
FALSE
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 4
Questions and Answers
What is the smallest component of a digital image - --CORRECT ANSWER--
pixel
How many CT numbers are assigned to each pixel in the image matrix? - --
CORRECT ANSWER--One
In a CT image, the CT number - --CORRECT ANSWER--Of a material is
dependent on its linear attenuation coefficient
Each two-dimensional square of data that make up the CT image is called a - --
CORRECT ANSWER--pixel
What is an element of the digital image - --CORRECT ANSWER--pixel
Which of the following influences the spatial resolution in cardiac CT imaging - --
CORRECT ANSWER--*detector size
*reconstruction interval
*pitch
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 1
,As patient motion increases spatial resolution decreases - --CORRECT ANSWER-
-TRUE
Which is an advantage of using a small focal spot - --CORRECT ANSWER--
increased spatial resolution
Increasing the CT image matrix from 256x256 to 512x512 will likely improve? - --
CORRECT ANSWER--High-contrast spatial resolution
The practical limiting spatial resolution of a CT scanner is 3.6 lp/cm. What size
object does this correspond to? - --CORRECT ANSWER--1.4 mm
Use of a bone filter, as opposed to a soft tissue filter, to reconstruct CT images
would likely improve? - --CORRECT ANSWER--Spatial resolution
The spatial resolution of a typical CT scanner is on the order of? - --CORRECT
ANSWER--1 mm
A 512 x 512 matrix CT image over a 30-cm field of view could show a spatial
resolution of no better than ? lp/cm? - --CORRECT ANSWER--8.5
When comparing a 512x512 matrix to a 1024x1024 matrix, the 1024x1024 matrix?
- --CORRECT ANSWER--Contains four times as many pixels: 1024 x 1024
=1048576 then 512 x 512= 262144...then divide 1048576 /262144 = 4
High contrast spatial resolution and low contrast resolution are typically measured
baseline and ? thereafter - --CORRECT ANSWER--Biannually
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 2
,To improve the high contrast spatial resolution of a CT study, one would increase
_____ while keeping all other factors the same. - --CORRECT ANSWER--Matrix
size (128x128 to 512x512)
A radiologist wants to improve the high-contrast spatial resolution of anatomy
which he/she is examining by CT. The change which would best lead to this
improvement is - --CORRECT ANSWER--Increase the matrix size
To improve the high-contrast spatial resolution of a CT study, one could increase ?
while keeping all other factors the same? - --CORRECT ANSWER--Matrix size
A voxel contains 25% air, 50% water and 25% bone. The CT number for this
voxel would be expected to be _____ HU? - --CORRECT ANSWER--0
How many pixels are contained in a 1,024 matrix image? - --CORRECT
ANSWER--D. 1,048,576
MATH 1024 X1024
It is located in a matrix and is a two dimensional representation of a voxel - --
CORRECT ANSWER--pixel
When CT numbers are calculated for voxels (volume elements) of tissue what is
assigned the calculated number and a subsequent shade of gray - --CORRECT
ANSWER--pixel
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 3
, What is defined as a picture element or the smallest component of the digital image
- --CORRECT ANSWER--pixel
A CT scan produces a 512x512 matrix transverse image of a 30 cm diameter FOV.
Each pixel is approximately _____ mm on a side. - --CORRECT ANSWER--0.6
equation: 30cm/512= .058cm convert to mm and its .58 which is approximately
0.6
The ability of a system to define small objects distinctly is referred to as which of
the following? - --CORRECT ANSWER--spatial resolution
Which of the following terms is/are commonly used to describe a CT scanner's
ability to differentiate objects with similar linear attenuation coeffiecents - --
CORRECT ANSWER--*spatial resolution
*sensitivity
Which of the following factors have an affect on contrast resolution - --
CORRECT ANSWER--*patient size
*slice thickness
*pixel size
*mAs/dose
As mAs/dose increases contrast resolution decreases - --CORRECT ANSWER--
FALSE
....COPYRIGHT ©️ 2025 ALL RIGHTS RESERVED...TRUSTED & VERIFIED 4
