BECC TEST 2 Prep 2026/2027 –
Comprehensive Study Guide & Practice
Test
Who's in charge of maintaining an engineering log? - correct answer-EOOW when
underway, EDO in port.
How do you mark an out-of-specification reading? - correct answer-Circle it in
red, report to work supervisor, annotate it on the back.
What two logs maintained by the engineering department are legal records? -
correct answer-Engineering log and bell log
How long are LEGAL records maintained on board? - correct answer-3 years
How long are OPERATING records maintained on board? - correct answer-6
months
Which log is a record of all fuels, lubricating oils, and freshwater on board? -
correct answer-Hourly
, When is the engineering log reviewed by the Commanding Officer? - correct
answer-End of every month
How often is a compartment entered to be considered a manned compartment? -
correct answer-Every hour
Who has to approve operations of equipment out-of-parameters? - correct
answer-Commanding Officer (CO)
What is the purpose of a locking device? - correct answer-Deterring unauthorized
access to equipment.
If a piece of equipment has been tampered with, who has to approve the
resuming of normal operations? - correct answer-Commanding Officer (CO)
Where are all the valves that require locking devices listed? - correct answer-EO'S
STANDING ORDERS
Who must be present when opening the MRG and is responsible for maintaining
the keys to the MRG? - correct answer-Engineer Officer
What document requires to verify all locks and locking devices prior to getting
underway? - correct answer-Master Light-Off checklist(MLOC)
While in-port, who will engineering watchstanders notify of any discrepancies? -
correct answer-EDO
Comprehensive Study Guide & Practice
Test
Who's in charge of maintaining an engineering log? - correct answer-EOOW when
underway, EDO in port.
How do you mark an out-of-specification reading? - correct answer-Circle it in
red, report to work supervisor, annotate it on the back.
What two logs maintained by the engineering department are legal records? -
correct answer-Engineering log and bell log
How long are LEGAL records maintained on board? - correct answer-3 years
How long are OPERATING records maintained on board? - correct answer-6
months
Which log is a record of all fuels, lubricating oils, and freshwater on board? -
correct answer-Hourly
, When is the engineering log reviewed by the Commanding Officer? - correct
answer-End of every month
How often is a compartment entered to be considered a manned compartment? -
correct answer-Every hour
Who has to approve operations of equipment out-of-parameters? - correct
answer-Commanding Officer (CO)
What is the purpose of a locking device? - correct answer-Deterring unauthorized
access to equipment.
If a piece of equipment has been tampered with, who has to approve the
resuming of normal operations? - correct answer-Commanding Officer (CO)
Where are all the valves that require locking devices listed? - correct answer-EO'S
STANDING ORDERS
Who must be present when opening the MRG and is responsible for maintaining
the keys to the MRG? - correct answer-Engineer Officer
What document requires to verify all locks and locking devices prior to getting
underway? - correct answer-Master Light-Off checklist(MLOC)
While in-port, who will engineering watchstanders notify of any discrepancies? -
correct answer-EDO