1
CWEA E/I 2 Study Guide Quest Questions
with Correct Answers | Updated (100%
Correct Answers)
Receiving job instruction and planning
equipment use are part of:
a. craft data.
b. job preparation.
c. work factors.
d. leveled time. Answer: b. job preparation
Anticipating other tasks or problems:
a. usually creates additional problems.
b. wastes time.
c. sharply reduces the number
of emergencies.
d. often is not worth the effort. Answer: c sharply reduces the
number
of emergencies
© 2025 All rights reserved
,2
Making job planning a group effort:
a. wastes time.
b. improves productivity.
c. causes confusion.
d. All the above Answer: b improves productivity
Rubber safety gloves should be tested how often?
a Every 12 months
b. Every 9 months
c. Every 6 months
d. Every 4 months Answer: a Every 12 months
Rubber safety blankets should be tested how often?
a. Every 6 months
b. Every 9 months
c. Every 12 months
d. Every 18 months Answer: b Every 9 months
What is the interrupting current of a GFIC receptacle?
© 2025 All rights reserved
,3
a. 20 VAL
b. 5 MA
c. 10 UDL
d. 20 MA Answer: b 5 MA
What type of stepladder is forbidden while working on electrical
equipment?
a. Wood
b. Fiberglass
c. Aluminum
d. Ceramic Answer: c Aluminum
What is the killer of electrical shock?
a. Voltage
b. Current
c. Resistance
d. Ohms Answer: b Current
The relationship between an electric
© 2025 All rights reserved
, 4
current and a magnetic field is called:
a. matter.
b. atoms.
c. electromagnetism.
d. element Answer: c electromagnetism
Electrons flowing from one place to
another make a:
a. current.
b. track.
c. circuit.
d. channel Answer: a current
Between two objects, the development
of static charges creates a:
a. potential difference.
b. battery.
c. thermocouple.
© 2025 All rights reserved
CWEA E/I 2 Study Guide Quest Questions
with Correct Answers | Updated (100%
Correct Answers)
Receiving job instruction and planning
equipment use are part of:
a. craft data.
b. job preparation.
c. work factors.
d. leveled time. Answer: b. job preparation
Anticipating other tasks or problems:
a. usually creates additional problems.
b. wastes time.
c. sharply reduces the number
of emergencies.
d. often is not worth the effort. Answer: c sharply reduces the
number
of emergencies
© 2025 All rights reserved
,2
Making job planning a group effort:
a. wastes time.
b. improves productivity.
c. causes confusion.
d. All the above Answer: b improves productivity
Rubber safety gloves should be tested how often?
a Every 12 months
b. Every 9 months
c. Every 6 months
d. Every 4 months Answer: a Every 12 months
Rubber safety blankets should be tested how often?
a. Every 6 months
b. Every 9 months
c. Every 12 months
d. Every 18 months Answer: b Every 9 months
What is the interrupting current of a GFIC receptacle?
© 2025 All rights reserved
,3
a. 20 VAL
b. 5 MA
c. 10 UDL
d. 20 MA Answer: b 5 MA
What type of stepladder is forbidden while working on electrical
equipment?
a. Wood
b. Fiberglass
c. Aluminum
d. Ceramic Answer: c Aluminum
What is the killer of electrical shock?
a. Voltage
b. Current
c. Resistance
d. Ohms Answer: b Current
The relationship between an electric
© 2025 All rights reserved
, 4
current and a magnetic field is called:
a. matter.
b. atoms.
c. electromagnetism.
d. element Answer: c electromagnetism
Electrons flowing from one place to
another make a:
a. current.
b. track.
c. circuit.
d. channel Answer: a current
Between two objects, the development
of static charges creates a:
a. potential difference.
b. battery.
c. thermocouple.
© 2025 All rights reserved
