WFSM PRE EOC BLOCK 1 QUESTIONS
WITH COMPLETE SOLUTIONS!!
1 of
114
Term
what action should you take if you notice a slight leak on a
mechanical seal you have just installed?
replace the o-ring.
replace the seal and o-ring.
stop the pump, restart, and see what happens.
allow reasonable time for seals to adjust.
Give this one a try later!
, d. allow reasonable time for b. tank water level when it's
the seals to adjust. being filled
d. lithium-based grease; hand- d. space around gears and rpms
pressure gun turning the pump
Don't know?
2 of 114
Term
6.What three views are used in working sketches?
a. isometric, back and side
b. top, side, and isometric
c. front, back and side.
d. back, top and front
Give this one a try later!
b. rotory-vane b. top, side and isometric
b. wearing loose clothing c. Serviceable equipment.
Don't know?
3 of 114
Term
,19. What happens when a base and an acid are mixed?
a.coagulation
b. disinfection
c. neutralization
d. sedimentation
Give this one a try later!
c. neutralization d. millimeters
b. ball c. 8.34 lb
Don't know?
4 of 114
Term
What item under the Occupational Safety and Health Act (OSHA)
provides requirements to manage identification and knowledge of a
material's chemical makeup and associated hazards?
a. Material safety data sheet (MSDS).
b. Hazard communication (HAZCOM) standard.
c. Hazardous Communication Program guide. d. National Institute for
Occupational Safety and Health (NIOSH) guide.
Give this one a try later!
d. Physical modification, education
and training, and enforcement c. A team effort of many
of knowledgeable individuals
, safety standards.
Hazard communication
(HAZCOM) standard. c. Lack of oxygen to the brain.
Don't know?
5 of 114
Term
You are more likely to get a fatal electrical shock from a
a. medium-voltage circuit.
b. macro-voltage circuit.
c. high-voltage circuit.
d. low-voltage circuit.
Give this one a try later!
c. blind flanges a. Fire and shock
c. Serviceable equipment. c. high-voltage circuit.
Don't know?
WITH COMPLETE SOLUTIONS!!
1 of
114
Term
what action should you take if you notice a slight leak on a
mechanical seal you have just installed?
replace the o-ring.
replace the seal and o-ring.
stop the pump, restart, and see what happens.
allow reasonable time for seals to adjust.
Give this one a try later!
, d. allow reasonable time for b. tank water level when it's
the seals to adjust. being filled
d. lithium-based grease; hand- d. space around gears and rpms
pressure gun turning the pump
Don't know?
2 of 114
Term
6.What three views are used in working sketches?
a. isometric, back and side
b. top, side, and isometric
c. front, back and side.
d. back, top and front
Give this one a try later!
b. rotory-vane b. top, side and isometric
b. wearing loose clothing c. Serviceable equipment.
Don't know?
3 of 114
Term
,19. What happens when a base and an acid are mixed?
a.coagulation
b. disinfection
c. neutralization
d. sedimentation
Give this one a try later!
c. neutralization d. millimeters
b. ball c. 8.34 lb
Don't know?
4 of 114
Term
What item under the Occupational Safety and Health Act (OSHA)
provides requirements to manage identification and knowledge of a
material's chemical makeup and associated hazards?
a. Material safety data sheet (MSDS).
b. Hazard communication (HAZCOM) standard.
c. Hazardous Communication Program guide. d. National Institute for
Occupational Safety and Health (NIOSH) guide.
Give this one a try later!
d. Physical modification, education
and training, and enforcement c. A team effort of many
of knowledgeable individuals
, safety standards.
Hazard communication
(HAZCOM) standard. c. Lack of oxygen to the brain.
Don't know?
5 of 114
Term
You are more likely to get a fatal electrical shock from a
a. medium-voltage circuit.
b. macro-voltage circuit.
c. high-voltage circuit.
d. low-voltage circuit.
Give this one a try later!
c. blind flanges a. Fire and shock
c. Serviceable equipment. c. high-voltage circuit.
Don't know?
