CSIA TEST EXAM QUESTIONS WITH VERIFIED
CORRECT SOLUTIONS // 2025/2026
(AGRADE)
Rectangular flues with aspect ratios greater than 2 to 1 shall be
sized at least of the fireplace opening -ANSWER->1:8
single wall connector clearance for an unlisted gas appliance
with a draft hood is -ANSWER->
a level inspection is done with ladders and common
hand tools -ANSWER->2
Draft is the force or pressure difference between the inside and
the outside of the venting system -ANSWER->true
NFPA 211 recommends chimney flues should be inspected
ANSWER->Annually
Two major factors that affect draft are -ANSWER->temperature
differential and chimney height
,what are factors of combustion efficiency -ANSWER->time
turbulence and temperature
rabies is not carried by -ANSWER->Birds
what species carries histoplasmosis -ANSWER->Birds
what animal is known for roundworm -ANSWER->raccoons
what is NOT a step of a sweep -ANSWER->turn all gas
appliances off
What is the proper class fire extinguisher for flammable liquids
grease and oil -ANSWER->Class B
T or F - the area of a fireplace chimney flue cannot be greater
than twice the area of the wood stove appliance outlet on an
exterior chimney -ANSWER->True
, a 24 gauge sheet metal panel with 1 inch airspace will reduce
clearance to combustibles by when used as a wall
protector -ANSWER->66% ???
According to NFPA 211 solid fuel burning appliances can be
install in a garage -ANSWER->
Fuel air and heat are required components of what -
ANSWER>combustion
The maximum width for a type 1 industrial grade ladder rating
is -ANSWER->250 pounds
where the trim of a mantel extends up to an 1 1/2 inch
clearance to combustibles from the firebox opening should be
at least -ANSWER->6 inches
there must be inches of masonry between a wall
thimble an combustible material -ANSWER->12
CORRECT SOLUTIONS // 2025/2026
(AGRADE)
Rectangular flues with aspect ratios greater than 2 to 1 shall be
sized at least of the fireplace opening -ANSWER->1:8
single wall connector clearance for an unlisted gas appliance
with a draft hood is -ANSWER->
a level inspection is done with ladders and common
hand tools -ANSWER->2
Draft is the force or pressure difference between the inside and
the outside of the venting system -ANSWER->true
NFPA 211 recommends chimney flues should be inspected
ANSWER->Annually
Two major factors that affect draft are -ANSWER->temperature
differential and chimney height
,what are factors of combustion efficiency -ANSWER->time
turbulence and temperature
rabies is not carried by -ANSWER->Birds
what species carries histoplasmosis -ANSWER->Birds
what animal is known for roundworm -ANSWER->raccoons
what is NOT a step of a sweep -ANSWER->turn all gas
appliances off
What is the proper class fire extinguisher for flammable liquids
grease and oil -ANSWER->Class B
T or F - the area of a fireplace chimney flue cannot be greater
than twice the area of the wood stove appliance outlet on an
exterior chimney -ANSWER->True
, a 24 gauge sheet metal panel with 1 inch airspace will reduce
clearance to combustibles by when used as a wall
protector -ANSWER->66% ???
According to NFPA 211 solid fuel burning appliances can be
install in a garage -ANSWER->
Fuel air and heat are required components of what -
ANSWER>combustion
The maximum width for a type 1 industrial grade ladder rating
is -ANSWER->250 pounds
where the trim of a mantel extends up to an 1 1/2 inch
clearance to combustibles from the firebox opening should be
at least -ANSWER->6 inches
there must be inches of masonry between a wall
thimble an combustible material -ANSWER->12
