NCCER Power Tools
NCCER Power Tools
Study online at https://quizlet.com/_c89ijm
1. A tool feature added for convenience that turned out Trigger Lock.
to be very unsafe and should never be used is the...
2. Before changing the blade or bit or doing any kind of Unplug the Tool!
repair...
3. Before plugging in tools with on/off switches... Turn it off!
4. Most commonly used to make holes but with the Power Drill
right bit can be used as a sander, polisher, screwdriver,
grinder, or countersink tool.
5. If you can't loosen the drill chuck by hand to remove Chuck Key
the drill bit then you probably need a...
1/5
1
, NCCER Power Tools
NCCER Power Tools
Study online at https://quizlet.com/_c89ijm
6. These tools do not activate the hammering function Hammer Drill
until pressure is applied to the bit.
7. When there is no electricity or high production is nec- Pneumatic Drills
essary then you need these kind of drills.
8. A tool for cutting that has an adjustable blade depth Circular Saw
and two blade guards, one of which moves as you cut.
9. The width of the saw blade should be on the wasted Kerf
side of the cut. That's called the...
10. Good for cutting intricate details or rounded cuts. Saber Saw
Commonly called a Jigsaw
2/5
2
NCCER Power Tools
Study online at https://quizlet.com/_c89ijm
1. A tool feature added for convenience that turned out Trigger Lock.
to be very unsafe and should never be used is the...
2. Before changing the blade or bit or doing any kind of Unplug the Tool!
repair...
3. Before plugging in tools with on/off switches... Turn it off!
4. Most commonly used to make holes but with the Power Drill
right bit can be used as a sander, polisher, screwdriver,
grinder, or countersink tool.
5. If you can't loosen the drill chuck by hand to remove Chuck Key
the drill bit then you probably need a...
1/5
1
, NCCER Power Tools
NCCER Power Tools
Study online at https://quizlet.com/_c89ijm
6. These tools do not activate the hammering function Hammer Drill
until pressure is applied to the bit.
7. When there is no electricity or high production is nec- Pneumatic Drills
essary then you need these kind of drills.
8. A tool for cutting that has an adjustable blade depth Circular Saw
and two blade guards, one of which moves as you cut.
9. The width of the saw blade should be on the wasted Kerf
side of the cut. That's called the...
10. Good for cutting intricate details or rounded cuts. Saber Saw
Commonly called a Jigsaw
2/5
2
