CUSP EXAMINERS CORRECT QUESTIONS AND
ANSWERS SURE A+
✔✔Equipotential mats and barricades are protective measures that might be used: -
✔✔When a truck is grounded to a system neutral.
✔✔Personal protective grounds are sized on the basis of: - ✔✔Time and Current.
✔✔Bonding a metal aerial basket to grounded phase: - ✔✔Equalizes ground potentials
between basket and phase.
✔✔Best practice for covering conductors for the protection of the workers dictates that: -
✔✔Both primary and secondary conductors, in reach, not being worked on being
covered.
✔✔Under CSA Standards, which equipment operator classification requires prescribed
training and an employer's certification of training and qualification? - ✔✔All-terrain
forklift.
✔✔A primary difference between provincial regulations and federal regulations is NOT:
- ✔✔The provincial regulation includes federal government workers OR provincial
regulation may not be as stringent as the federal regulation (none of the above).
✔✔A forklift triangle of stability is found: - ✔✔Between the centerline of the rear axle
and the front wheels.
✔✔The plan for prevention of exposure to hazardous chemicals in the workplace will
most likely be found in: - ✔✔The hazard communication plan (WHMIS).
✔✔Where is an employer's procedures for reporting emergencies, evacuations and
accounting for employees are found? - ✔✔In the Emergency Management Plan
, ✔✔The degree of training shall be determined by: - ✔✔The risk to the employee for the
hazards involved.
✔✔Which best describe practices that are proven to prevent incidents in the workplace?
- ✔✔Hazard analysis, engineering controls, safe practices and training.
✔✔The relationship between safety and productivity is best described by the statement:
- ✔✔Simply put, when safety improves productivity also improves.
✔✔When written procedures and training do not cover a complex condition discovered
in the field, the worker is put into: - ✔✔Knowledge-based decision-making mode.
✔✔In the classic model, the most successful safety programs are characterized by
safety leadership from what groups? - ✔✔All employees from executive managers to
craft workers.
✔✔The first step in the process for selecting specific PPE is: - ✔✔Hazard assessment
that includes identifying risks.
✔✔A joint safety and health committee is best described as: - ✔✔Employers-sanctioned
group of supervisors and employee representatives with the authority to review and
correct hazards.
✔✔Of the choices below, which best demonstrates how leaders develop effective
employer-employee relationships? - ✔✔Being visible, setting the example,
communicating goals, consistent accountability for good and bad performance.
✔✔The acronym MSDS stands for: - ✔✔Material Safety Data Sheets
✔✔Annual total incident rates and lost time data are examples of: - ✔✔Lagging
Indicators
✔✔The purpose of root cause analysis is: - ✔✔Discovering the single most likely cause
of an incident.
✔✔What is the best example of administrative controls? - ✔✔Conduct training and
surveys of work sites to reduce at-risk behaviors.
✔✔In a facility emergency evacuation plan, which element is NOT required? - ✔✔Floor
markings that indicate pathways to the evacuation exit.
ANSWERS SURE A+
✔✔Equipotential mats and barricades are protective measures that might be used: -
✔✔When a truck is grounded to a system neutral.
✔✔Personal protective grounds are sized on the basis of: - ✔✔Time and Current.
✔✔Bonding a metal aerial basket to grounded phase: - ✔✔Equalizes ground potentials
between basket and phase.
✔✔Best practice for covering conductors for the protection of the workers dictates that: -
✔✔Both primary and secondary conductors, in reach, not being worked on being
covered.
✔✔Under CSA Standards, which equipment operator classification requires prescribed
training and an employer's certification of training and qualification? - ✔✔All-terrain
forklift.
✔✔A primary difference between provincial regulations and federal regulations is NOT:
- ✔✔The provincial regulation includes federal government workers OR provincial
regulation may not be as stringent as the federal regulation (none of the above).
✔✔A forklift triangle of stability is found: - ✔✔Between the centerline of the rear axle
and the front wheels.
✔✔The plan for prevention of exposure to hazardous chemicals in the workplace will
most likely be found in: - ✔✔The hazard communication plan (WHMIS).
✔✔Where is an employer's procedures for reporting emergencies, evacuations and
accounting for employees are found? - ✔✔In the Emergency Management Plan
, ✔✔The degree of training shall be determined by: - ✔✔The risk to the employee for the
hazards involved.
✔✔Which best describe practices that are proven to prevent incidents in the workplace?
- ✔✔Hazard analysis, engineering controls, safe practices and training.
✔✔The relationship between safety and productivity is best described by the statement:
- ✔✔Simply put, when safety improves productivity also improves.
✔✔When written procedures and training do not cover a complex condition discovered
in the field, the worker is put into: - ✔✔Knowledge-based decision-making mode.
✔✔In the classic model, the most successful safety programs are characterized by
safety leadership from what groups? - ✔✔All employees from executive managers to
craft workers.
✔✔The first step in the process for selecting specific PPE is: - ✔✔Hazard assessment
that includes identifying risks.
✔✔A joint safety and health committee is best described as: - ✔✔Employers-sanctioned
group of supervisors and employee representatives with the authority to review and
correct hazards.
✔✔Of the choices below, which best demonstrates how leaders develop effective
employer-employee relationships? - ✔✔Being visible, setting the example,
communicating goals, consistent accountability for good and bad performance.
✔✔The acronym MSDS stands for: - ✔✔Material Safety Data Sheets
✔✔Annual total incident rates and lost time data are examples of: - ✔✔Lagging
Indicators
✔✔The purpose of root cause analysis is: - ✔✔Discovering the single most likely cause
of an incident.
✔✔What is the best example of administrative controls? - ✔✔Conduct training and
surveys of work sites to reduce at-risk behaviors.
✔✔In a facility emergency evacuation plan, which element is NOT required? - ✔✔Floor
markings that indicate pathways to the evacuation exit.
