EPA Model Lead Based Paint Risk Assessor TEST BANK
FINAL EXAM LATEST 2026-2027 ACTUAL TEST
ACCURATE QUESTIONS AND CORRECT
DETAILED ANSWERS (CORRECT VERIFIED
SOLUTIONS) CURRENTLY UPDATED VERSION
|ALREADY GRADED A+
- Determining the most appropriate evaluation process and
obtaining background information
- Conducting the evaluation and determining the actual hazards
-Providing guidance toward reducing and eliminating lead hazards
and producing a written report
The Risk Assessment process developed by HUD include:
- Collect background information on the number of similar
units in the development, the construction date, and the number
of children in each unit
- Collection information on the management and maintenance of
the units within the development
Before conducting a Risk Assessment, the Risk Assessor should:
,Deteriorated paint, friction and impact surfaces, areas that have
been mouthed by a child, bare soil and accumulated dust.
The Visual Assessment identifies:
<10%
The condition of fair for interior components with small surface
areas would have of deterioration:
Paint that is loosened or broken because of impact
Chipped paint is defined as:
Chewing on lead contaminated components
Children are most commonly poisoned by:
<10 square feet
The condition rating of fair for exterior components with large
surface areas would have of deterioration.
, It is relatively simple and inexpensive and Current EPA, HUD and State
standards are based on wipe sampling
Dust Wipe sampling is recommended sampling method for most routine
risk assessment because:
250 ug/ft2 (micrograms/square foot)
EPA defines a "dangerous level of lead" in household dust from
window sill as:
- Need to be analyzed by a laboratory from a sample
typically referred to as a Blank" to assure wipes are not
contaminated prior to use.
- Should be less than 5 ug (micrograms/wipe
Background levels if contamination on dust wipes:
, 40 ug/ft2 (micrograms/square foot)
The HUD standard for a "dangerous level of lead" in household dust
on an uncarpeted floor surface is:
Does not tear easily but is easy for laboratory to digest (ASTM E1972)
Wipe material should meet the following criteria:
a third wipe pass that focusing on the corners - EPA
When wiping a floor surface for dust lead collection, the last wipe
pass is:
S
Wipe samples generally are collected by wiping side-to-side in an
______ shaped pattern
FINAL EXAM LATEST 2026-2027 ACTUAL TEST
ACCURATE QUESTIONS AND CORRECT
DETAILED ANSWERS (CORRECT VERIFIED
SOLUTIONS) CURRENTLY UPDATED VERSION
|ALREADY GRADED A+
- Determining the most appropriate evaluation process and
obtaining background information
- Conducting the evaluation and determining the actual hazards
-Providing guidance toward reducing and eliminating lead hazards
and producing a written report
The Risk Assessment process developed by HUD include:
- Collect background information on the number of similar
units in the development, the construction date, and the number
of children in each unit
- Collection information on the management and maintenance of
the units within the development
Before conducting a Risk Assessment, the Risk Assessor should:
,Deteriorated paint, friction and impact surfaces, areas that have
been mouthed by a child, bare soil and accumulated dust.
The Visual Assessment identifies:
<10%
The condition of fair for interior components with small surface
areas would have of deterioration:
Paint that is loosened or broken because of impact
Chipped paint is defined as:
Chewing on lead contaminated components
Children are most commonly poisoned by:
<10 square feet
The condition rating of fair for exterior components with large
surface areas would have of deterioration.
, It is relatively simple and inexpensive and Current EPA, HUD and State
standards are based on wipe sampling
Dust Wipe sampling is recommended sampling method for most routine
risk assessment because:
250 ug/ft2 (micrograms/square foot)
EPA defines a "dangerous level of lead" in household dust from
window sill as:
- Need to be analyzed by a laboratory from a sample
typically referred to as a Blank" to assure wipes are not
contaminated prior to use.
- Should be less than 5 ug (micrograms/wipe
Background levels if contamination on dust wipes:
, 40 ug/ft2 (micrograms/square foot)
The HUD standard for a "dangerous level of lead" in household dust
on an uncarpeted floor surface is:
Does not tear easily but is easy for laboratory to digest (ASTM E1972)
Wipe material should meet the following criteria:
a third wipe pass that focusing on the corners - EPA
When wiping a floor surface for dust lead collection, the last wipe
pass is:
S
Wipe samples generally are collected by wiping side-to-side in an
______ shaped pattern
