Nathan2002

Asst. CG - ANSWER-means an employee or volunteer who helps a manager or caregiver provide supervisory care services, personal care services, or directed care services to a resident, and does not include a family member of the resident. Assisted living services - ANSWER-means supervisory care services, personal care services, directed care services, behavioral health services, or ancillary services provided to a resident by or on behalf of an assisted living facility. Manager - ANSWER-means...

HVAC - ANSWER-heating, ventilation, and air conditioning abuse - ANSWER-use (something) to bad effect or for a bad purpose; misuse. accessibility - ANSWER-handiness: the quality of being at hand when needed accident reporting - ANSWER-In a health care facility, such as a hospital, nursing home, or assisted living, an incident report or accident report is a form that is filled out in order to record details of an unusual event that occurs at the facility, such as an injury to a patient. ...

modern vehicle contains complex? - ANSWER-mechanical systems Modern vehicles' complex systems are design - ANSWER-improve efficiency, reduce emissions, and provide passengers safety. Lube technicians - ANSWER-carry out all aspects of manufacturer-scheduled maintenance activities on a range of vehicle components, such as the lubrication system Light line Technicians - ANSWER-diagnose and replace the mechanical and electrical components of motor vehicles, such as gaskets, belts, hoses, t...

Technician A says suspension systems must tolerate huge amounts of force when the car is driven. Technician B says these forces occur when cornering, stopping, and accelerating. Who is correct? a. Technician A b. Technician B c. Both Technician A and Technician B d. Neither Technician A nor Technician B - ANSWER-c. Both Technician A and Technician B Technician A says the two main types of auto body construction are full-frame and unibody. Technician B says a common type of full...

As hydrocarbons become _____________, the increased use of sophisticated electrical and electronic systems in vehicles to improve efficiency and economy will continue into the future. A. Scarcer B. More expensive C. More cost-effective D. Both A and B - ANSWER-Both A and B To work on current and future vehicles, it is increasingly important for the technician to have a sound understanding of electrical terminology, the behavior of electricity, and electrical component and circuit th...

Henry Ford's _____ approach made assembly much more efficient, increasing the number of vehicles that could be built in a shift and thereby lowering production costs. - ANSWER-Assembly line Tech A says that the production of vehicles today requires a mix of robotic and human assembly. Tech B says that most of the parts on a vehicle are preassembled into unit assemblies before they reach the assembly line. Who is correct? - ANSWER-Both A and B Heavy line technicians must be able to researc...

CDX CHAPTER 5 SERVICE INFORMATION TEST - ANSWER- - ANSWER- 1. Which of the following is NOT represented by the "3 Cs" abbreviation? - ANSWER- A) Customer - ANSWER- B) Concern - ANSWER- C) Cause - ANSWER- D) Correction - ANSWER- Page: 90 - ANSWER- 2. Which of the following is a typical label found on vehicles? - ANSWER- A) Refrigerant label - ANSWER- B) Coolant label - ANSWER- C) Belt routing label - ANSWER- D) All of the answers listed - ANSWER- Page: 89...

Question text Technician A says you should replace any protective clothing that is not in good condition, as it is no longer able to fully protect you. Technician B says shirts, pants, shoes, and gloves are all PPE. Who is correct? a. Technician A b. Technician B c. Both Technician A and Technician B d. Neither Technician A nor Technician B - ANSWER-c. Both Technician A and Technician B Symptoms of a dislocation include all of the following EXCEPT: a. Pain or tenderness around the a...

During the last few years, emissions from heavy-duty diesel trucks and buses have: - ANSWER-been significantly reduced. Down speeding is: - ANSWER-downshifting a transmission to increase engine speed. upshifting a transmission to decrease engine speed. using low axle gear ratios to reduce engine speed. Technician A says that diesel engines supply only enough air to completely burn all the fuel in the combustion chamber. Technician B says that diesel engines supply excess air to the c...

air drill - ANSWER-A compressed air-powered drill air hammer - ANSWER-A tool pwered by compressed air with various hammer, cutting, punching, or chisel attachments. Also called an air chisel. air-impact wrench - ANSWER-An impact tool powered by compressed air designed to undo tight fasteners. air nozzle - ANSWER-A compressed-air device that emits a fine stream of compressed isr for drying or cleaning parts air ratchet - ANSWER-A ratchet tool for use with sockets powered by compressed...

Which of the following would represent atmospheric pressure at sea level? A. 14.7 Psi B. 29.8inches Hg C.101.3 kPa D. All of the above - ANSWER-D. All of the above Hydraulic pressure is used in? A. Brake Systems B. Steering Systems C. Automatic Transmissions D. All of the above - ANSWER-All of the above Which of the following hydraulic principles would best apply to the operation of a truck wet line kit? A. Hydromechanics B. Hydrostatics C. Hydroponics D. Hydrodynamics - ANSWE...

Technician A says independent shops are not affiliated with vehicle manufacturers. Technician B says independent shops service a broad range of vehicles. Who is correct? Select one: a. Technician A b. Technician B c. Both Technician A and Technician B d. Neither Technician A nor Technician B - ANSWER-c. Both Technician A and Technician B Lube technicians are responsible for keeping their workspace, tools, and equipment clean and organized. Select one: True False - ANSWER-TRUE ASE ...

At which of the following compression ratios does the efficiency of an engine begin to diminish with increasing compression? - ANSWER-23:1 Technician A says that IDI engines need to use multi-orifice nozzles to mix air and fuel well. Technician B says that only DI combustion chambers use multi-orifice nozzles. Who is correct? - ANSWER-Technician B A centrally located fuel injector in a diesel engine is most likely to have how many valves per cylinder? - ANSWER-Four The average compressi...

Technician A says that all vehicles must be fitted with a service brake and parking brake. Technician B says that only trucks must be fitted with a service brake and parking brake. Who is correct? - ANSWER-Technician A The principle that allows your car to stop is: - ANSWER-Friction The effectiveness of friction brakes depends on the braking components' - ANSWER-Ability to dissipate heat quickly into the atmosphere Tech A says that kinetic energy is created during braking to stop the v...

MAINTENANCE AND REPAIR - ANSWER-Tires are one of the most maintenance-intensive parts of a vehicle. They require regular visual inspections, pressure inspections, and rotations. Visual inspections of the tires and wheels should be made whenever a vehicle comes into a shop for any work FIGURE 1. It is common to check for any unusual wear patterns and for any embedded objects or other signs of damage. If the vehicle is not equipped with a TPMS, then the operator should be encouraged to check the p...

Which of the following systems controls the oscillating movement of the wheels over bumps? Select one: a. Transmission system b. Steering system c. Braking system d. Suspension system - ANSWER-Suspension system Tech A states that when operating 4WD vehicles, the 4WD system should only be engaged on loose or slippery surfaces. Tech B states that when operating AWD vehicles, it is not necessary to switch between 2WD and 4WD, as the system is designed to drive all four wheels all of the tim...

All of the following should be researched before performing any brake tasks EXCEPT: - ANSWER-PCM wiring diagram Always follow the _____ procedures when servicing brake systems. - ANSWER-Manufacturer Brake systems not repaired properly can cause which of the following? - ANSWER-All of the above By creating processes that help ensure that the steps of a brake repair job are not forgotten, helps _____. - ANSWER-Reduce liability Repeated exposure to _____ particles can lead to asbestosis...

Technician A says the driver's side door is usually a master door lock, which means that when it is locked or unlocked with the key (or the remote fob), the other locks follow suit. Technician B says there are two main types of door lock actuators: an AC motor actuator and a magnetic plunger type. - ANSWER-tech a Refer to the typical horn schematic provided to answer the question below. The horn blows at all times. - ANSWER-A short to ground in the slip ring (clock spring) The purpose o...

PADI Open Water Exam Study Guide with Complete Solution PADI Open Water Diver Certification Exam Graded A+ PADI, Open Water Diver, Final Exam Review -Answered 100% Correct PADI Open Water Dive Exam Latest Updated Graded A+ PADI Open Water Diver Course Exam 2023/24 Solved 100% Correct Padi Open Water Written Exam Study Guide with Complete Solution

To what depth is a diver trained to dive to after completion of PADI Open Water Course? - ANSWER-60 ft / 18 meters What will buoyancy of an object be (positive, neutral or negative) if it displaces an amount of water - ANSWER-positive more than its own weight? = positively buoyant less than its own weight? = negatively buoyant equal to its own weight? = neutrally buoyant As you descend in water the pressure - ANSWER-Increases Why is buoyancy control, both at the surface and underwate...