ASNT VT Guías de estudio, Notas de estudios & Resúmenes

ASNT VT Theory Questions (Level II) Answered Correctly To Pass!! Localized reduction in an area of a bolt that is under overload conditions is referred to as: a. sizing b. necking down c. erosion d. elongation b The least common location for fastener failure is: a. in the head to shank fillet b. throughout the first thread inside the nut on threaded fasteners c. in the mid grip d. at the transition from the thread to the shank c Discontinuities that are produced during the hot...

ASNT VT EXAM Level II

ASNT VT Theory Questions (Level II) Answered Correctly To Pass!! Localized reduction in an area of a bolt that is under overload conditions is referred to as: a. sizing b. necking down c. erosion d. elongation b The least common location for fastener failure is: a. in the head to shank fillet b. throughout the first thread inside the nut on threaded fasteners c. in the mid grip d. at the transition from the thread to the shank c Discontinuities that are produced during the hot...

ASNT VT Level II General Questions and Answers 2023 with complete solution

ASNT VT Level II: Questions And Answers

B. every 3 years by retraining and retesting - Answer- 1. Per ASNT Section XI, NDE personnel shall be recertified:A. every 5 years by re-examination B. every 3 years by retraining and retesting C. every 3 years based on continuing satisfactory performance D. annually by retraining B. his certification is automatically terminated - Answer- 2. Per SNT-TC-1A, when an employee leaves his employer:A. his certification automatically transfers to his new employer B. his certification is automat...

1. Localized education in an area of a bolt that is under overload conditions is referred to as? A. Sizing B. Necking Down C. Erosion D. Elongation CORRECT ANSWER b 2. The least common location for fastener failure is? A. In the head to shank fillet. B. Throughout the first thread inside the nut on threaded fasteners. C. In the mid grip. D. At the transition from the thread to the shank. CORRECT ANSWER c 3. Discontinuities that are produced during the hot or cold working of the in...