SENG 312 EXAM 2 STUDY GUIDE
System Hazard Analysis (SHA) definition - Answer -Identify and analyze hazard of
system interfaces with a focus on TLMs/SCFs
What does SHA do? - Answer -verifies system compliance
identifies and mitigates causal factors
ensures overall systems risk to be acceptable
How does SHA work? - Answer -It uses supplemental techniques (FTA, CCFA -
Common Cause Failure Analysis)
Interface - Answer -a shared boundary or connection between 2 dissimilar objects,
devices or systems through which information is passed. either physical or logical
SHA Inputs - Answer -System design/criteria
Identified hazards
HTS
TLMs
SCFs
SHA Process - Answer -1. Identify new subsystem interface hazards
2. Evaluate causal factors for each hazard
3. Collect and group all hazards into system TLM categories
4. Perform supporting analyses as necessary
5. Document the process
SHA output - Answer -System Interface Hazards
Causal Factors
Risk
SSRs
Important aspect of SHA - Answer -6. Identify system interface hazards
(after establish TLMs, SCFs)
(perform supporting analysis)
TLM - top level mishap - Answer -a significant mishap, can be caused by multiple
different hazards and different causal factors
SCF - Safety Critical Function - Answer -any function whose failure or misbehavior
could result in death/injury and /or system loss.
SHA worksheet components - Answer -System
number
TLM/SCF
, Hazard
Causes
Effects
Recommended Action
Typical causes of pipeline failure - Answer -Excavation damage
Natural force damage
Outside force damage
Corrosion
Connected equipment failure
Material defect
etc
SHA Advantages - Answer --Identifies system interface type hazards
-consolidates hazards to ensure that all causal factors are thoroughly investigated and
mitigated
-identifies critical system-level hazards that must be evaluated in more detail through
the use of their analysis technique
-provides the basis for making an assessment of overall system risk
Operating and Support Hazard Analysis (O&SHA) definition - Answer -Identifies and
analyzes hazards in system operational tasks
also identifies causal factor, effects, risks, and mitigation methods
What does O&SHA evaluate? - Answer -operational procedures, system design, and
human system integration (HSI) to assess the safety operation
considerations given to system design, operational design, hardware failure modes,
human error and task design
Scope of O&SHA - Answer -normal operation, test, installation, maintenance, repair,
training, storage, handling, transportation, and emergency response
Timing for O&SHA - Answer -Development phase, to affect the design for future safe
operations
Operation - Answer -Performance of procedures to meet an overall objective
Procedure - Answer -Set of tasks that are necessary to accomplish an operation.
Designed to be followed sequentially to properly and safely accomplish the operation.
Task - Answer -Element of work that together with other elements of work comprises a
procedure
O&SHA Inputs - Answer -System design
System operation
Operation manuals
System Hazard Analysis (SHA) definition - Answer -Identify and analyze hazard of
system interfaces with a focus on TLMs/SCFs
What does SHA do? - Answer -verifies system compliance
identifies and mitigates causal factors
ensures overall systems risk to be acceptable
How does SHA work? - Answer -It uses supplemental techniques (FTA, CCFA -
Common Cause Failure Analysis)
Interface - Answer -a shared boundary or connection between 2 dissimilar objects,
devices or systems through which information is passed. either physical or logical
SHA Inputs - Answer -System design/criteria
Identified hazards
HTS
TLMs
SCFs
SHA Process - Answer -1. Identify new subsystem interface hazards
2. Evaluate causal factors for each hazard
3. Collect and group all hazards into system TLM categories
4. Perform supporting analyses as necessary
5. Document the process
SHA output - Answer -System Interface Hazards
Causal Factors
Risk
SSRs
Important aspect of SHA - Answer -6. Identify system interface hazards
(after establish TLMs, SCFs)
(perform supporting analysis)
TLM - top level mishap - Answer -a significant mishap, can be caused by multiple
different hazards and different causal factors
SCF - Safety Critical Function - Answer -any function whose failure or misbehavior
could result in death/injury and /or system loss.
SHA worksheet components - Answer -System
number
TLM/SCF
, Hazard
Causes
Effects
Recommended Action
Typical causes of pipeline failure - Answer -Excavation damage
Natural force damage
Outside force damage
Corrosion
Connected equipment failure
Material defect
etc
SHA Advantages - Answer --Identifies system interface type hazards
-consolidates hazards to ensure that all causal factors are thoroughly investigated and
mitigated
-identifies critical system-level hazards that must be evaluated in more detail through
the use of their analysis technique
-provides the basis for making an assessment of overall system risk
Operating and Support Hazard Analysis (O&SHA) definition - Answer -Identifies and
analyzes hazards in system operational tasks
also identifies causal factor, effects, risks, and mitigation methods
What does O&SHA evaluate? - Answer -operational procedures, system design, and
human system integration (HSI) to assess the safety operation
considerations given to system design, operational design, hardware failure modes,
human error and task design
Scope of O&SHA - Answer -normal operation, test, installation, maintenance, repair,
training, storage, handling, transportation, and emergency response
Timing for O&SHA - Answer -Development phase, to affect the design for future safe
operations
Operation - Answer -Performance of procedures to meet an overall objective
Procedure - Answer -Set of tasks that are necessary to accomplish an operation.
Designed to be followed sequentially to properly and safely accomplish the operation.
Task - Answer -Element of work that together with other elements of work comprises a
procedure
O&SHA Inputs - Answer -System design
System operation
Operation manuals