1|Page
BDA Radiography and Radiology Exam 2026 | Actual
Exam with Complete Questions ||Verified Exam!!!|
British Dental Association | Dental Radiography
Certification||Newest Exam!!!
The aim of a quality assurance programme of radiographs
is to keep exposure and processing faults to a minimum.
What are the acceptable ratios? - Answer-Score 1 - 70%
Score 2 - 20%
Score 3 - 10%
Where on the body is the recommended position to place
a monitoring badge, which is used to identify if a staff
member has received any accidental exposures? -
Answer-Waist area
When a periapical view of an upper incisor is mounted for
viewing, what is the orientation of the film on the viewer? -
Answer-Incisor root above crown
Radiation monitoring badges must be worn by dental staff
when a set number of intra oral/extra oral radiographs are
,2|Page
exceeded in a week. What are the set numbers? - Answer-
150 intra oral or 50 extra oral
Which storage condition will not affect the shelf life of X-
ray film packets, by causing their deterioration before
reaching the stated expiry date? - Answer-Cold stock room
When is it acceptable for the X-ray machine to be
switched on? - Answer-Before an exposure
What is the correct way to store X-ray film stock - Answer-
Old stock must be used first
Which radiograph view is taken to screen orthodontic
patients for the presence or absence of teeth? - Answer-
Dental pantomograph
A left horizontal bite wing has been taken to determine if
the first molar teeth have occlusal caries present. The
image is coned and the second molars have been missed
off the exposure. What is the most likely quality assurance
rating? - Answer-Grade 2
, 3|Page
After processing, a radiograph appears black and no
image is visible. What is the quality assurance rating if this
film? - Answer-Grade 3
When run currently, a quality assurance system of
radiographs has to achieve what? - Answer-Minimise
patient exposure to an acceptable level
What is the correct system of film stock in their designated
storage area? - Answer-New stock at the back
In the event of an X-ray malfunction, the local rules will
indicate the position of the machine isolator switch that will
disconnect the electricity supply. Where should this
information be displayed? - Answer-By the safety zone
limit
When scoring during a quality assurance analysis of
radiographs, some may be marked as having minimal
errors present that do not prevent a diagnosis being made.
What score does this describe? - Answer-Grade 2
BDA Radiography and Radiology Exam 2026 | Actual
Exam with Complete Questions ||Verified Exam!!!|
British Dental Association | Dental Radiography
Certification||Newest Exam!!!
The aim of a quality assurance programme of radiographs
is to keep exposure and processing faults to a minimum.
What are the acceptable ratios? - Answer-Score 1 - 70%
Score 2 - 20%
Score 3 - 10%
Where on the body is the recommended position to place
a monitoring badge, which is used to identify if a staff
member has received any accidental exposures? -
Answer-Waist area
When a periapical view of an upper incisor is mounted for
viewing, what is the orientation of the film on the viewer? -
Answer-Incisor root above crown
Radiation monitoring badges must be worn by dental staff
when a set number of intra oral/extra oral radiographs are
,2|Page
exceeded in a week. What are the set numbers? - Answer-
150 intra oral or 50 extra oral
Which storage condition will not affect the shelf life of X-
ray film packets, by causing their deterioration before
reaching the stated expiry date? - Answer-Cold stock room
When is it acceptable for the X-ray machine to be
switched on? - Answer-Before an exposure
What is the correct way to store X-ray film stock - Answer-
Old stock must be used first
Which radiograph view is taken to screen orthodontic
patients for the presence or absence of teeth? - Answer-
Dental pantomograph
A left horizontal bite wing has been taken to determine if
the first molar teeth have occlusal caries present. The
image is coned and the second molars have been missed
off the exposure. What is the most likely quality assurance
rating? - Answer-Grade 2
, 3|Page
After processing, a radiograph appears black and no
image is visible. What is the quality assurance rating if this
film? - Answer-Grade 3
When run currently, a quality assurance system of
radiographs has to achieve what? - Answer-Minimise
patient exposure to an acceptable level
What is the correct system of film stock in their designated
storage area? - Answer-New stock at the back
In the event of an X-ray malfunction, the local rules will
indicate the position of the machine isolator switch that will
disconnect the electricity supply. Where should this
information be displayed? - Answer-By the safety zone
limit
When scoring during a quality assurance analysis of
radiographs, some may be marked as having minimal
errors present that do not prevent a diagnosis being made.
What score does this describe? - Answer-Grade 2
