NIMS 2 (Milling) – Questions With Objective
Solutions
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Spindle Reverse
Choose an answer
Button to reactivate CNC program
1 Code G54 2
after stopped?
Match the code to the corresponding
3 Code M03 4
letters.... M4
Don't know?
Terms in this set (53)
Code G54 Workoffset #1
Code M30 Program end/rewind
Code G91 Incremental Programming
Code G00 Rapid Motion
Code M03 Spindle On Clockwise
, Code M06 Tool change
Code G01 Linear Feed
Why is it necessary to click So the machine can find the X,Y and Z reference points.
"home" or zero return the
machine on it's initial
startup?
A box letter represents Datum
what?
Which direction do you positive (+) X direction
move handle or move the
axis if you want to move a
tool from left to right in
relationship to the
workpiece?
What mode switch position Zero return
allows you to send the
machine to it's reference
"home" position?
How many 2- ½" long bars 6
can be cut be cut from a
rod measuring a total of 15
- ¾" long?
Button to reactivate CNC Cycle Start
program after stopped?
What mode switch position Edit
allows programs to be
modified?
You must cut a block 3.25" 3.375
long and add ⅛ of an inch
for finish machining. The
length of the block you
must cut is...... ?
Before adding soluble oil Check the mixture in the machine for concentration
to the machine you must?
How often should you Once every Shift
check the oil and coolant
levels?
Solutions
Save
Practice questions for this set
Learn 1 /7 Study with Learn
Spindle Reverse
Choose an answer
Button to reactivate CNC program
1 Code G54 2
after stopped?
Match the code to the corresponding
3 Code M03 4
letters.... M4
Don't know?
Terms in this set (53)
Code G54 Workoffset #1
Code M30 Program end/rewind
Code G91 Incremental Programming
Code G00 Rapid Motion
Code M03 Spindle On Clockwise
, Code M06 Tool change
Code G01 Linear Feed
Why is it necessary to click So the machine can find the X,Y and Z reference points.
"home" or zero return the
machine on it's initial
startup?
A box letter represents Datum
what?
Which direction do you positive (+) X direction
move handle or move the
axis if you want to move a
tool from left to right in
relationship to the
workpiece?
What mode switch position Zero return
allows you to send the
machine to it's reference
"home" position?
How many 2- ½" long bars 6
can be cut be cut from a
rod measuring a total of 15
- ¾" long?
Button to reactivate CNC Cycle Start
program after stopped?
What mode switch position Edit
allows programs to be
modified?
You must cut a block 3.25" 3.375
long and add ⅛ of an inch
for finish machining. The
length of the block you
must cut is...... ?
Before adding soluble oil Check the mixture in the machine for concentration
to the machine you must?
How often should you Once every Shift
check the oil and coolant
levels?
