29202-15 Reading Welding Detail
Drawing Questions and Answers |
Latest 2026
conventional dimensioning
The two basic methods for dimensioning a part on a welding drawing
are base line and:
detail drawings
The drawings that contain all of the information necessary to make a
part are called ___.
full section
The type of drawing that shows internal details not normally visible is
the ___.
long break line
, thin, solid line with zigzags is called a(n) ___.
pictorial view
An isometric view is also known as a(n) ___.
Leader Line
A Thin, Horizontal Line That Has An Angled Arrowhead At One End And
Is Used With A Note Or Dimension Is Called A(N) ___.
Reference Dimension
Dimension Obtained By Adding Or Subtracting Other Dimensions Found
On A Welding Drawing Is Known As A ___.
Welding Detail Drawing
The Type Of Drawing That Depicts The Weldment That Must Be
Fabricated And The Pieces To Be Joined By Welding Is The ___.
Drawing Questions and Answers |
Latest 2026
conventional dimensioning
The two basic methods for dimensioning a part on a welding drawing
are base line and:
detail drawings
The drawings that contain all of the information necessary to make a
part are called ___.
full section
The type of drawing that shows internal details not normally visible is
the ___.
long break line
, thin, solid line with zigzags is called a(n) ___.
pictorial view
An isometric view is also known as a(n) ___.
Leader Line
A Thin, Horizontal Line That Has An Angled Arrowhead At One End And
Is Used With A Note Or Dimension Is Called A(N) ___.
Reference Dimension
Dimension Obtained By Adding Or Subtracting Other Dimensions Found
On A Welding Drawing Is Known As A ___.
Welding Detail Drawing
The Type Of Drawing That Depicts The Weldment That Must Be
Fabricated And The Pieces To Be Joined By Welding Is The ___.
