NACE CIP I EXAM QUESTIONS WITH CORRECT
ANSWERS
NACE |No. |3/SSPC-SP |6
Commercial |Blast |Cleaning
33% |of |each |unit |area |of |surface |may |consist |of |light |shadows, |slight |streaks, |or |minor |
discoloration
NACE |No. |1/SSPC-SP |5
White |Metal |Blast |Cleaning
NACE |No. |2/SSPC-SP |10
Near-White |Metal |Blast |Cleaning.
NACE |No. |8/SSPC-SP |14
Industrial |Blast |Cleaning
-traces |of |tightly |adherent |mill |scale, |rust, |and |coating |residues |are |permitted |to |remain |on |10
|percent |of |each |unit |area
NACE |No. |4/SSPC-SP |7
Brush-Off |Blast |Cleaning
ISO |8501-1
Surface |Preparation |Standards |for |Abrasive |Blast |and |hand |and |Power |Tool |Cleaning
&
"Blast |Cleaning |to |Visually |Cleaned |Steel"
(ISO) |Sa |3
Blast |Cleaning |to |Visually |Clean |Steel
OR |(white |metal)
(ISO) |Sa |2 |1/2
Very |Thorough |Blast |Cleaning
OR |(near |white |metal)
, (ISO) |Sa |2
Thorough |Blast |Cleaning
or |(commercial |blast)
(ISO) |Sa |1
Light |Blast |Cleaning
OR |(brush |off |blast)
ISO |8501-1 |St |2
Thorough |Hand |& |Power |Tool |Cleaning.
ISO |8501-1 |St |3
Very |Thorough |Hand |& |Power |Tool |Cleaning.
SSPC
Surface |Preparation |Standards |for |hand |and |Power |Tool |Cleaning
SSPC-SP |2
Hand |Tool |Cleaning
SSPC-SP |3
Power |Tool |Cleaning
SSPC-SP |15
Commercial |Grade |power |Tool |Cleaning
SSPC-SP |11
Power |Tool |Cleaning |to |Bare |metal:
NACE |Standards |Related |to |Protective |Coatings
NACE |No. |1/SSPC-SP |5
Joint |Surface |preparation |Standard, |WHITE |METAL |BLAST
NACE |No. |2/SSPC-SP |10
Joint |surface |preparation |standard, |NEAR-WHITE |METAL
NACE |No. |3/SSPC-SP |6
Joint |surface |preparation |standard, |COMMERCIAL |BLAST
ANSWERS
NACE |No. |3/SSPC-SP |6
Commercial |Blast |Cleaning
33% |of |each |unit |area |of |surface |may |consist |of |light |shadows, |slight |streaks, |or |minor |
discoloration
NACE |No. |1/SSPC-SP |5
White |Metal |Blast |Cleaning
NACE |No. |2/SSPC-SP |10
Near-White |Metal |Blast |Cleaning.
NACE |No. |8/SSPC-SP |14
Industrial |Blast |Cleaning
-traces |of |tightly |adherent |mill |scale, |rust, |and |coating |residues |are |permitted |to |remain |on |10
|percent |of |each |unit |area
NACE |No. |4/SSPC-SP |7
Brush-Off |Blast |Cleaning
ISO |8501-1
Surface |Preparation |Standards |for |Abrasive |Blast |and |hand |and |Power |Tool |Cleaning
&
"Blast |Cleaning |to |Visually |Cleaned |Steel"
(ISO) |Sa |3
Blast |Cleaning |to |Visually |Clean |Steel
OR |(white |metal)
(ISO) |Sa |2 |1/2
Very |Thorough |Blast |Cleaning
OR |(near |white |metal)
, (ISO) |Sa |2
Thorough |Blast |Cleaning
or |(commercial |blast)
(ISO) |Sa |1
Light |Blast |Cleaning
OR |(brush |off |blast)
ISO |8501-1 |St |2
Thorough |Hand |& |Power |Tool |Cleaning.
ISO |8501-1 |St |3
Very |Thorough |Hand |& |Power |Tool |Cleaning.
SSPC
Surface |Preparation |Standards |for |hand |and |Power |Tool |Cleaning
SSPC-SP |2
Hand |Tool |Cleaning
SSPC-SP |3
Power |Tool |Cleaning
SSPC-SP |15
Commercial |Grade |power |Tool |Cleaning
SSPC-SP |11
Power |Tool |Cleaning |to |Bare |metal:
NACE |Standards |Related |to |Protective |Coatings
NACE |No. |1/SSPC-SP |5
Joint |Surface |preparation |Standard, |WHITE |METAL |BLAST
NACE |No. |2/SSPC-SP |10
Joint |surface |preparation |standard, |NEAR-WHITE |METAL
NACE |No. |3/SSPC-SP |6
Joint |surface |preparation |standard, |COMMERCIAL |BLAST
