Certification Study Guide
Section 1: Basic Wastewater Treatment Processes
Question 1
What is the purpose of a bar screen in a wastewater treatment plant? A. To remove dissolved
solids B. To remove large debris and rags C. To disinfect wastewater D. To measure flow rate
Correct Answer: B Rationale: Bar screens physically remove large debris (rags, sticks,
plastics) to protect downstream equipment. They do not remove dissolved solids (A), disinfect
water (C), or measure flow (D)cache.careers360.mobi.
Question 2
Which treatment process removes settleable solids and organic matter through gravity? A.
Screening B. Grit removal C. Primary sedimentation D. Chlorination
Correct Answer: C Rationale: Primary sedimentation uses gravity to settle out solids and
organic matter. Screening (A) removes large debris, grit removal (B) removes heavy inorganic
particles, and chlorination (D) disinfects effluentcache.careers360.mobi.
Question 3
What is the primary function of grit removal? A. To remove organic solids B. To remove heavy
inorganic particles like sand and gravel C. To disinfect wastewater D. To aerate wastewater
,Correct Answer: B Rationale: Grit removal protects pumps and equipment by removing
heavy inorganic particles (sand, gravel). It does not remove organics (A), disinfect (C), or aerate
(D)cache.careers360.mobi.
Question 4
Which of the following is a common method for disinfecting wastewater? A. Sedimentation B.
Chlorination C. Filtration D. Screening
Correct Answer: B Rationale: Chlorination is a widely used disinfection method to kill
pathogens. Sedimentation (A) removes solids, filtration (C) removes fine particles, and
screening (D) removes large debriscache.careers360.mobi.
Question 5
What is the purpose of secondary treatment in a wastewater plant? A. To remove large debris B.
To remove dissolved and suspended organic matter C. To disinfect effluent D. To remove grit
Correct Answer: B Rationale: Secondary treatment (e.g., activated sludge, trickling filters)
removes dissolved and suspended organic matter through biological processes. Large
debris (A) is removed by screening, disinfection (C) occurs after secondary treatment, and grit
(D) is removed in preliminary treatmentcache.careers360.mobi.
Section 2: Preliminary, Primary, and Secondary
Treatment
Question 6
Which process is NOT part of preliminary treatment? A. Screening B. Grit removal C.
Sedimentation D. Comminution
Correct Answer: C Rationale: Sedimentation is a primary treatment process. Screening (A),
grit removal (B), and comminution (D) are all part of preliminary
treatmentcache.careers360.mobi.
Question 7
, What is the typical detention time for a primary clarifier? A. 5–10 minutes B. 1–2 hours C. 6–12
hours D. 24 hours
Correct Answer: B Rationale: Primary clarifiers typically have a detention time of 1–2 hours
to allow settleable solids to separate. Shorter times (A) are insufficient, and longer times (C, D)
are unnecessary for primary treatmentcache.careers360.mobi.
Question 8
Which of the following is a secondary treatment process? A. Bar screen B. Grit chamber C.
Activated sludge D. Primary clarifier
Correct Answer: C Rationale: Activated sludge is a secondary (biological) treatment
process. Bar screens (A), grit chambers (B), and primary clarifiers (D) are part of preliminary or
primary treatmentcache.careers360.mobi.
Question 9
What is the purpose of a trickling filter in wastewater treatment? A. To remove grit B. To provide
biological treatment for organic matter C. To disinfect effluent D. To measure flow
Correct Answer: B Rationale: Trickling filters use biological growth on media to remove
organic matter. They do not remove grit (A), disinfect (C), or measure flow
(D)cache.careers360.mobi.
Question 10
Which of the following is a characteristic of activated sludge? A. Uses fixed media for biofilm
growth B. Uses suspended microorganisms in an aerated tank C. Operates without oxygen D.
Removes only inorganic solids
Correct Answer: B Rationale: Activated sludge uses suspended microorganisms in an
aerated tank to break down organic matter. Fixed media (A) describes trickling filters, anaerobic
conditions (C) are not used, and it removes organic (not just inorganic) solids
(D)cache.careers360.mobi.
Section 3: Screening, Grit Removal, and Sedimentation