TPC TRAINING 2 QUESTIONS & ANSWERS
Which of the following is used to measure weight? - answer -beam balance
The distance from a point on one screw thread to the corresponding point on the next
thread is called the ____ of the thread. - answer -pitch
If you need to measure with an accuracy greater than a hundredth of an inch, you
should use a - answer -vernier caliper
The whole tip of a(n) _____ screwdriver fits into the screwed, thereby reducing slippage.
- answer -parallel tip blade
The strap wrench is best for - answer -breaking free frozen pipes
The clamping device that holds a drill bit in place is called the - answer -chuck
If a burr has formed on your drill bit, you should - answer -grind the burr off
What should never be removed from a three-prong plug? - answer -ground prong
The four main types of hazards to which you might be exposed in the plant are:
electrical, chemical, mechanical and - answer -enviromental
A chemical splash is an example of what type of accident? - answer -exposure
An easy acronym for fire extinguisher use is - answer -pass (pull, aim, squeeze, sweep)
One of the first signs of bearing failure is - answer -high bearing temperature
How does a continuity tester show that a circuit is complete? - answer -beeps
Which of the following would yoube most likely to measure with an inside caliper? -
answer -washer
A dial indicator can be used to determine all of the following except? - answer -size
A ball-peen hammer is used for all of the following except - answer -carpentry
How should a bench vise be tightened to hold an object? - answer -by hand
Which of the following is an example of thermal expansion? - answer -the roadway
buckling due to freezing water
Which instrument is used to measure the rate of fluid flow? - answer -barometer
Which of the following is used to measure weight? - answer -beam balance
The distance from a point on one screw thread to the corresponding point on the next
thread is called the ____ of the thread. - answer -pitch
If you need to measure with an accuracy greater than a hundredth of an inch, you
should use a - answer -vernier caliper
The whole tip of a(n) _____ screwdriver fits into the screwed, thereby reducing slippage.
- answer -parallel tip blade
The strap wrench is best for - answer -breaking free frozen pipes
The clamping device that holds a drill bit in place is called the - answer -chuck
If a burr has formed on your drill bit, you should - answer -grind the burr off
What should never be removed from a three-prong plug? - answer -ground prong
The four main types of hazards to which you might be exposed in the plant are:
electrical, chemical, mechanical and - answer -enviromental
A chemical splash is an example of what type of accident? - answer -exposure
An easy acronym for fire extinguisher use is - answer -pass (pull, aim, squeeze, sweep)
One of the first signs of bearing failure is - answer -high bearing temperature
How does a continuity tester show that a circuit is complete? - answer -beeps
Which of the following would yoube most likely to measure with an inside caliper? -
answer -washer
A dial indicator can be used to determine all of the following except? - answer -size
A ball-peen hammer is used for all of the following except - answer -carpentry
How should a bench vise be tightened to hold an object? - answer -by hand
Which of the following is an example of thermal expansion? - answer -the roadway
buckling due to freezing water
Which instrument is used to measure the rate of fluid flow? - answer -barometer
