Page 1 of 19
NCCCO Overhead Crane / NCCCO Core Exams (2025
UPDATES STUDY BUNDLE WITH COMPLETE SOLUTIONS)
Questions and 100% Correct Verified Answers | Grade
A
Overhead cranes with more than one hoisting unit shall have?
.....ANSWER.....Its rated load marked on it.
How often does O.S.H.A. require a written wire rope inspection?
.....ANSWER.....Once a month
What is the purpose of the "E" (Emergency) stop on an overhead
crane? .....ANSWER.....Removes power to entire crane.
Most loads should be rigged to within how many degrees of
level? .....ANSWER.....5
According to ASME B30.2, what is the safety factor for rigging?
.....ANSWER.....5 to 1
,Page 2 of 19
According to O.S.H.A. frequent inspections shall be performed?
.....ANSWER.....Daily to monthly
According to ASME B30.2 a frequent inspection must be
performed by a? .....ANSWER.....Designated person
According to OSHA, the maximum twist of the hook can't exceed?
.....ANSWER.....10 degrees
When inspecting electrical contacts, what are the signs they are
bad? .....ANSWER.....Pitted or burned
According to ASME B30.2, what type of fire extinguisher is
required for overhead cranes? .....ANSWER.....10BC
Before leaving an overhead crane unattended, attached loads
should be? .....ANSWER.....Lowered to the floor
Before using your hand to steady any load, you should?
.....ANSWER.....Follow company policy
, Page 3 of 19
According to OSHA, the rated capacity of all overhead cranes
shall be? .....ANSWER.....Clearly marked on the side of the crane
When attaching spreaders to any load, you must keep in mind
that? .....ANSWER.....The lower the spreader angle the greater
the tension
By order of hitch strength, which is correct?
a. Vertical, basket, choker
b. Basket, vertical, choker
c. Basket, choker, vertical
d. Choker, basket, vertical .....ANSWER.....Basket, vertical, choker
According to OSHA, the maximum hook throat opening must not
exceed? .....ANSWER.....15% of its original size
How many cubic feet is in a rectangular object that measures S
At. X3 At. X2 ft.? .....ANSWER.....30 cubic feet
NCCCO Overhead Crane / NCCCO Core Exams (2025
UPDATES STUDY BUNDLE WITH COMPLETE SOLUTIONS)
Questions and 100% Correct Verified Answers | Grade
A
Overhead cranes with more than one hoisting unit shall have?
.....ANSWER.....Its rated load marked on it.
How often does O.S.H.A. require a written wire rope inspection?
.....ANSWER.....Once a month
What is the purpose of the "E" (Emergency) stop on an overhead
crane? .....ANSWER.....Removes power to entire crane.
Most loads should be rigged to within how many degrees of
level? .....ANSWER.....5
According to ASME B30.2, what is the safety factor for rigging?
.....ANSWER.....5 to 1
,Page 2 of 19
According to O.S.H.A. frequent inspections shall be performed?
.....ANSWER.....Daily to monthly
According to ASME B30.2 a frequent inspection must be
performed by a? .....ANSWER.....Designated person
According to OSHA, the maximum twist of the hook can't exceed?
.....ANSWER.....10 degrees
When inspecting electrical contacts, what are the signs they are
bad? .....ANSWER.....Pitted or burned
According to ASME B30.2, what type of fire extinguisher is
required for overhead cranes? .....ANSWER.....10BC
Before leaving an overhead crane unattended, attached loads
should be? .....ANSWER.....Lowered to the floor
Before using your hand to steady any load, you should?
.....ANSWER.....Follow company policy
, Page 3 of 19
According to OSHA, the rated capacity of all overhead cranes
shall be? .....ANSWER.....Clearly marked on the side of the crane
When attaching spreaders to any load, you must keep in mind
that? .....ANSWER.....The lower the spreader angle the greater
the tension
By order of hitch strength, which is correct?
a. Vertical, basket, choker
b. Basket, vertical, choker
c. Basket, choker, vertical
d. Choker, basket, vertical .....ANSWER.....Basket, vertical, choker
According to OSHA, the maximum hook throat opening must not
exceed? .....ANSWER.....15% of its original size
How many cubic feet is in a rectangular object that measures S
At. X3 At. X2 ft.? .....ANSWER.....30 cubic feet
