Fire Alarm Installer Licensing Exam
Practice Test – 100 Questions And
Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant
Download Pdf
1. What is the primary purpose of a fire alarm system?
A. To alert maintenance staff
B. To provide security surveillance
C. To detect fire and notify occupants
D. To control building HVAC
Rationale: Fire alarm systems are designed to detect fires early and alert
occupants to evacuate.
2. Which code primarily governs fire alarm installations in most
jurisdictions?
A. NEC Article 300
B. NFPA 72
,C. NFPA 25
D. NEC Article 110
Rationale: NFPA 72 is the National Fire Alarm and Signaling Code.
3. What type of circuit allows devices to continue functioning even if a
wire is cut?
A. Non-supervised
B. Class C
C. Class A
D. Open loop
Rationale: Class A circuits reroute signals to maintain operation during a
break.
4. Which device initiates a fire alarm?
A. Notification appliance
B. Smoke detector
C. Fire panel
D. Power supply
Rationale: Smoke detectors are initiating devices that trigger alarms.
5. Which notification device produces audible alerts?
A. Strobe
B. Horn
C. Pull station
, D. Heat detector
Rationale: Horns provide audible fire alarm notification.
6. A manual pull station must generally be mounted at what height?
A. 24–36 inches
B. 70–80 inches
C. 42–48 inches
D. 30–36 inches
Rationale: ADA/NFPA standards require pull stations at 42–48 inches.
7. What is the backup power requirement for fire alarm control panels
(FACP)?
A. 8 hours standby, 5 minutes alarm
B. 24 hours standby, 5 minutes alarm
C. 4 hours standby, 10 minutes alarm
D. No backup needed
Rationale: NFPA 72 requires 24 hours of standby plus alarm duration.
8. Which type of detector is most sensitive to smoldering fires?
A. Rate-of-rise heat
B. Fixed-temperature heat
C. Flame detector
D. Photoelectric smoke detector
Rationale: Photoelectric detectors respond quickly to smoldering fires.
9. Which cable type is most commonly used for fire alarm systems?
Practice Test – 100 Questions And
Correct Answers (Verified Answers) Plus
Rationales 2026 Q&A | Instant
Download Pdf
1. What is the primary purpose of a fire alarm system?
A. To alert maintenance staff
B. To provide security surveillance
C. To detect fire and notify occupants
D. To control building HVAC
Rationale: Fire alarm systems are designed to detect fires early and alert
occupants to evacuate.
2. Which code primarily governs fire alarm installations in most
jurisdictions?
A. NEC Article 300
B. NFPA 72
,C. NFPA 25
D. NEC Article 110
Rationale: NFPA 72 is the National Fire Alarm and Signaling Code.
3. What type of circuit allows devices to continue functioning even if a
wire is cut?
A. Non-supervised
B. Class C
C. Class A
D. Open loop
Rationale: Class A circuits reroute signals to maintain operation during a
break.
4. Which device initiates a fire alarm?
A. Notification appliance
B. Smoke detector
C. Fire panel
D. Power supply
Rationale: Smoke detectors are initiating devices that trigger alarms.
5. Which notification device produces audible alerts?
A. Strobe
B. Horn
C. Pull station
, D. Heat detector
Rationale: Horns provide audible fire alarm notification.
6. A manual pull station must generally be mounted at what height?
A. 24–36 inches
B. 70–80 inches
C. 42–48 inches
D. 30–36 inches
Rationale: ADA/NFPA standards require pull stations at 42–48 inches.
7. What is the backup power requirement for fire alarm control panels
(FACP)?
A. 8 hours standby, 5 minutes alarm
B. 24 hours standby, 5 minutes alarm
C. 4 hours standby, 10 minutes alarm
D. No backup needed
Rationale: NFPA 72 requires 24 hours of standby plus alarm duration.
8. Which type of detector is most sensitive to smoldering fires?
A. Rate-of-rise heat
B. Fixed-temperature heat
C. Flame detector
D. Photoelectric smoke detector
Rationale: Photoelectric detectors respond quickly to smoldering fires.
9. Which cable type is most commonly used for fire alarm systems?
