CSX FREIGHT CONDUCTOR QUIZ 3 REVIEW QUESTIONS
AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS)
ALREADY GRADED A+
206.9- Which of the following is not considered an enroute failure of
two way telemetry? Ans✓✓✓Rear-to-front no communication
314.5- When shoving over a highway crossing without functioning gates
and your outside a CSX yard. How must the crossing be protected?
Ans✓✓✓Protected by a qualified employee on the ground
314.2- When protection from the ground is required at a highway
crossing at grade. How must the train operate through the effected area?
(2 Answer) Ans✓✓✓1) Stop the movement before fouling the crossing
2) Place a burning fusees on each side of the crossing when notified of
an activation failure
308.12- When your train receives permission to pass another train In
emergency. What speed must your speed not exceed?
Ans✓✓✓Restricted speed
204.9- When your train has enroute failure of auxiliary lights (digs
lights) how must you operate?
, (2 Answer) Ans✓✓✓1) One light fails, continue unrestricted until next
calendar day inspection
2) If both light fail do not exceed 20mph over highway-rail crossing at
grade and continue to the next location where repairs can be made
200.4- T/F
Your handling burning fusees you must be careful to not place them in
which of the following?
A) Platforms
B) Bridges
C) Buildings
D) Composition-rubber surfaces of road crossing
E) Other fire-prone location Ans✓✓✓All true
Glossary
What's the name of a condition when the highway rail crossing at grade
automatic warnings device fail to indicate the approach of a train?
Ans✓✓✓Activation Failure
Glossary
AND CORRECT DETAILED ANSWERS (VERIFIED ANSWERS)
ALREADY GRADED A+
206.9- Which of the following is not considered an enroute failure of
two way telemetry? Ans✓✓✓Rear-to-front no communication
314.5- When shoving over a highway crossing without functioning gates
and your outside a CSX yard. How must the crossing be protected?
Ans✓✓✓Protected by a qualified employee on the ground
314.2- When protection from the ground is required at a highway
crossing at grade. How must the train operate through the effected area?
(2 Answer) Ans✓✓✓1) Stop the movement before fouling the crossing
2) Place a burning fusees on each side of the crossing when notified of
an activation failure
308.12- When your train receives permission to pass another train In
emergency. What speed must your speed not exceed?
Ans✓✓✓Restricted speed
204.9- When your train has enroute failure of auxiliary lights (digs
lights) how must you operate?
, (2 Answer) Ans✓✓✓1) One light fails, continue unrestricted until next
calendar day inspection
2) If both light fail do not exceed 20mph over highway-rail crossing at
grade and continue to the next location where repairs can be made
200.4- T/F
Your handling burning fusees you must be careful to not place them in
which of the following?
A) Platforms
B) Bridges
C) Buildings
D) Composition-rubber surfaces of road crossing
E) Other fire-prone location Ans✓✓✓All true
Glossary
What's the name of a condition when the highway rail crossing at grade
automatic warnings device fail to indicate the approach of a train?
Ans✓✓✓Activation Failure
Glossary
