Module 4 questions
Save
Pneumatic tools get their power from - correct answer <<<<<<<<<<<Air pressure
The most common power drill is to - correct answer <<<<<<<<<<<Make holes in wood, metal, and
plastic
A masonry bit is able to drill into concrete and similar material because it has a: - correct answer
<<<<<<<<<<<Carbide tip
An example of an electric power drill that is designed to be used in tight spaces is a(n) - correct answer
<<<<<<<<<<<Right-Angle drill
The electromagnetic drill is a - correct answer <<<<<<<<<<<Portable drill used on thick metal
Hammer drills are designed to drill into - correct answer <<<<<<<<<<<Concrete, brick, and tile.
A pneumatic impact wrench requires the use of: - correct answer <<<<<<<<<<<Impact sockets that are
designed for the applicable tool.
When cutting with a circular saw, grip the saw handles: - correct answer <<<<<<<<<<<Firmly with two
hands.
The high speed setting on a reciprocating saw is used for: - correct answer <<<<<<<<<<<Sawing wood
and other soft materials.
When using a saber saw, avoid vibration by: - correct answer <<<<<<<<<<<Using a clamp or vise to hold
the work.
, Before using a reciprocating saw to cut through a wall or partition, always: - correct answer
<<<<<<<<<<<Find out what is on the other side.
Use only a band saw that has a: - correct answer <<<<<<<<<<<Stop.
A sliding compound miter saw has a rail that allows the blade to slide forward and backward, which
enables the saw to: - correct answer <<<<<<<<<<<Cut wider material than a standard miter saw.
The blade of an abrasive cutoff saw spins at such a high speed that: - correct answer <<<<<<<<<<<The
resulting friction is hot enough to burn through the materials.
The end grinder is used to: - correct answer <<<<<<<<<<<Smooth the inside of materials, such as pipe.
A detail grinder smoothes and polishes intricate metallic work by using attachments called: - correct
answer <<<<<<<<<<<Points
Power-actuated fastening systems are used to: - correct answer <<<<<<<<<<<Anchor static loads to
steel beams.
Before you begin setting up a pavement breaker for use, make sure that the air pressure is: - correct
answer <<<<<<<<<<<Shut off at the main air outlet.
Porta-Power cylinders are rated by how much weight they can lift and by: - correct answer
<<<<<<<<<<<The distance they can move the weight.
Hydraulic jacks are used when the application call for: - correct answer <<<<<<<<<<<Extreme force to be
applied.
A Porta-Power is an example of a(n) - correct answer <<<<<<<<<<<Hydraulic tool
A power miter saw combines a miter box with a - correct answer <<<<<<<<<<<Circular saw
Save
Pneumatic tools get their power from - correct answer <<<<<<<<<<<Air pressure
The most common power drill is to - correct answer <<<<<<<<<<<Make holes in wood, metal, and
plastic
A masonry bit is able to drill into concrete and similar material because it has a: - correct answer
<<<<<<<<<<<Carbide tip
An example of an electric power drill that is designed to be used in tight spaces is a(n) - correct answer
<<<<<<<<<<<Right-Angle drill
The electromagnetic drill is a - correct answer <<<<<<<<<<<Portable drill used on thick metal
Hammer drills are designed to drill into - correct answer <<<<<<<<<<<Concrete, brick, and tile.
A pneumatic impact wrench requires the use of: - correct answer <<<<<<<<<<<Impact sockets that are
designed for the applicable tool.
When cutting with a circular saw, grip the saw handles: - correct answer <<<<<<<<<<<Firmly with two
hands.
The high speed setting on a reciprocating saw is used for: - correct answer <<<<<<<<<<<Sawing wood
and other soft materials.
When using a saber saw, avoid vibration by: - correct answer <<<<<<<<<<<Using a clamp or vise to hold
the work.
, Before using a reciprocating saw to cut through a wall or partition, always: - correct answer
<<<<<<<<<<<Find out what is on the other side.
Use only a band saw that has a: - correct answer <<<<<<<<<<<Stop.
A sliding compound miter saw has a rail that allows the blade to slide forward and backward, which
enables the saw to: - correct answer <<<<<<<<<<<Cut wider material than a standard miter saw.
The blade of an abrasive cutoff saw spins at such a high speed that: - correct answer <<<<<<<<<<<The
resulting friction is hot enough to burn through the materials.
The end grinder is used to: - correct answer <<<<<<<<<<<Smooth the inside of materials, such as pipe.
A detail grinder smoothes and polishes intricate metallic work by using attachments called: - correct
answer <<<<<<<<<<<Points
Power-actuated fastening systems are used to: - correct answer <<<<<<<<<<<Anchor static loads to
steel beams.
Before you begin setting up a pavement breaker for use, make sure that the air pressure is: - correct
answer <<<<<<<<<<<Shut off at the main air outlet.
Porta-Power cylinders are rated by how much weight they can lift and by: - correct answer
<<<<<<<<<<<The distance they can move the weight.
Hydraulic jacks are used when the application call for: - correct answer <<<<<<<<<<<Extreme force to be
applied.
A Porta-Power is an example of a(n) - correct answer <<<<<<<<<<<Hydraulic tool
A power miter saw combines a miter box with a - correct answer <<<<<<<<<<<Circular saw
