FireTeam Test With complete solu on Rated A+
2025/2026 NEW!!
Nut - -> Washer -> Spring
What do you use to ghten a bolt? - Socket
Gear ques on: If they want to go fast - Bigger gear goes faster
Bolt goes through and comes out other side with washer and nut - Threaded end pointed away
from you so it is not a hazard
What do you use to cut a bolt? - Hacksaw
Unmelted material - stop and call mechanic
Hopper - Adjust how much comes out. DO NOT adjust speed of belt.
If it is not a ma,er of speed - Adjust size of opening. DO NOT adjust speed
What do you do when the first grinder stops? - Jam
Grinder jam - Reverse manually
How to remove molding sta on arm? - Loosen middle nut then remove end nut
What is wrong if water is pouring over the edge? - Green filter clogged
, Water tank is rising too quickly - Reduce amount of fresh water
What is the purpose of washing in a shake mo on? - Wash all sides of the material
Washing sta on: one pipe has four pipes the other has one spout at the end, which has the
most pressure? - 1 spout/head has most pressure
Gear for washing machine - turn clock wise to turn off
Inside of gasket/washer - distribute pressure and reduce chance of loosening
50% cone volume - B-middle line
1 - washing
2 - washing
3 - nothing
4 - mixing
5 - mixing
6 - nothing
2025/2026 NEW!!
Nut - -> Washer -> Spring
What do you use to ghten a bolt? - Socket
Gear ques on: If they want to go fast - Bigger gear goes faster
Bolt goes through and comes out other side with washer and nut - Threaded end pointed away
from you so it is not a hazard
What do you use to cut a bolt? - Hacksaw
Unmelted material - stop and call mechanic
Hopper - Adjust how much comes out. DO NOT adjust speed of belt.
If it is not a ma,er of speed - Adjust size of opening. DO NOT adjust speed
What do you do when the first grinder stops? - Jam
Grinder jam - Reverse manually
How to remove molding sta on arm? - Loosen middle nut then remove end nut
What is wrong if water is pouring over the edge? - Green filter clogged
, Water tank is rising too quickly - Reduce amount of fresh water
What is the purpose of washing in a shake mo on? - Wash all sides of the material
Washing sta on: one pipe has four pipes the other has one spout at the end, which has the
most pressure? - 1 spout/head has most pressure
Gear for washing machine - turn clock wise to turn off
Inside of gasket/washer - distribute pressure and reduce chance of loosening
50% cone volume - B-middle line
1 - washing
2 - washing
3 - nothing
4 - mixing
5 - mixing
6 - nothing
