FUSION360 EXAMS SCRIPT 2025/2026 QUESTIONS AND
SOLUTION RATED A+
✔✔While offsetting sketch entities, if you select the ______ check box in the OFFSET
dialog box, all the contiguous entities of the selected entity get automatically selected. -
✔✔chain/chain selection
✔✔You can trim the unwanted sketch entities to their nearest intersection by using the
________ tool. - ✔✔trim
✔✔On activating the ________ tool in the Linetype area of the SKETCHPALETTE
dialog box, you can create construction entities in the drawing area. - ✔✔construction
✔✔The ________ tool is used for breaking a sketch entity into two or more than two
segments at its point of intersection with other entities. - ✔✔break
✔✔The ________ tool is used for extending sketch entities up to their nearest
intersection. - ✔✔extend
✔✔The number of pattern instances specified in the Quantity field include the parent or
original instance selected to pattern. (True/False) - ✔✔true
✔✔You cannot recall the skipped pattern instances. (True/False) - ✔✔false
✔✔The ________ constraint is used for coinciding a sketch point on to a line, an arc, or
an elliptical entity. - ✔✔coincident
✔✔You can control the display or visibility of the applied constraints by using the
________ check box of the SKETCH PALETTE dialog box. - ✔✔constraints
✔✔The ________ dimension is applied to a sketch representing revolve features. -
✔✔linear diameter
✔✔All degrees of freedom of a ______ sketch are fixed. - ✔✔fully defined
✔✔You can apply constraints by using the constraints tools available in the ______
panel of the SKETCH contextual tab. - ✔✔constraints
✔✔The ______ tool is used for applying dimension, depending upon the type of entity
selected. - ✔✔sketch dimension
SOLUTION RATED A+
✔✔While offsetting sketch entities, if you select the ______ check box in the OFFSET
dialog box, all the contiguous entities of the selected entity get automatically selected. -
✔✔chain/chain selection
✔✔You can trim the unwanted sketch entities to their nearest intersection by using the
________ tool. - ✔✔trim
✔✔On activating the ________ tool in the Linetype area of the SKETCHPALETTE
dialog box, you can create construction entities in the drawing area. - ✔✔construction
✔✔The ________ tool is used for breaking a sketch entity into two or more than two
segments at its point of intersection with other entities. - ✔✔break
✔✔The ________ tool is used for extending sketch entities up to their nearest
intersection. - ✔✔extend
✔✔The number of pattern instances specified in the Quantity field include the parent or
original instance selected to pattern. (True/False) - ✔✔true
✔✔You cannot recall the skipped pattern instances. (True/False) - ✔✔false
✔✔The ________ constraint is used for coinciding a sketch point on to a line, an arc, or
an elliptical entity. - ✔✔coincident
✔✔You can control the display or visibility of the applied constraints by using the
________ check box of the SKETCH PALETTE dialog box. - ✔✔constraints
✔✔The ________ dimension is applied to a sketch representing revolve features. -
✔✔linear diameter
✔✔All degrees of freedom of a ______ sketch are fixed. - ✔✔fully defined
✔✔You can apply constraints by using the constraints tools available in the ______
panel of the SKETCH contextual tab. - ✔✔constraints
✔✔The ______ tool is used for applying dimension, depending upon the type of entity
selected. - ✔✔sketch dimension
