Click here for more: Scholars nexus
Communications, Lights and Runways - Pilot
Communications (53 questions) Questions with Detailed
Verified Answers
(Refer to figure 20, area 3.) What is the recommended communications procedure for a landing at
Currituck County Airport? Ans: ✓ ✓ ✓ Transmit intentions on 122.9 MHz when 10 miles out and
give position reports in the traffic pattern..
Contact Elizabeth City FSS for airport advisory service.
Contact New Bern FSS for area traffic information.
How should a VFR flight plan be closed at the completion of the flight at a controlled airport? Ans:
✓ ✓ ✓ The pilot must close the flight plan with the nearest FSS or other FAA facility upon landing..
The tower will relay the instructions to the nearest FSS when the aircraft contacts the tower for
landing.
© Get it right 2025 Getaway - Stuvia US All rights reserved
,Click here for more: Scholars nexus
The tower will automatically close the flight plan when the aircraft turns off the runway.
How will ATC respond when you declare "Minimum Fuel" status? Ans: ✓ ✓ ✓ They will be alert for
any occurrence which might delay the aircraft..
They will guarantee priority handling.
They will declare an emergency.
(Refer to figure 22, area 2; and figure 31.) What is the correct UNICOM frequency to be used at
Coeur D'Alene to request fuel? Ans: ✓ ✓ ✓ 122.1/108.8 MHz.
122.8 MHz..
135.075 MHz.
(Refer to figure 26, area 2.) What is the recommended communication procedure when inbound to
land at Cooperstown Airport? Ans: ✓ ✓ ✓ Broadcast intentions when 10 miles out on the
CTAF/MULTICOM frequency, 122.9 MHz..
© Get it right 2025 Getaway - Stuvia US All rights reserved
, Click here for more: Scholars nexus
Circle the airport in a left turn prior to entering traffic.
Contact UNICOM when 10 miles out on 122.8 MHz.
Inbound to an airport with no tower, FSS, or UNICOM in operation, a pilot should self-announce on
MULTICOM frequency Ans: ✓ ✓ ✓ 122.7.
122.9..
123.0.
If faced with an emergency where Air Traffic Control (ATC) assistance is desired and not already in
contact, which frequency can be used to establish communications? Ans: ✓ ✓ ✓ 122.5 MHz.
121.5 MHz..
128.725 MHz.
© Get it right 2025 Getaway - Stuvia US All rights reserved
Communications, Lights and Runways - Pilot
Communications (53 questions) Questions with Detailed
Verified Answers
(Refer to figure 20, area 3.) What is the recommended communications procedure for a landing at
Currituck County Airport? Ans: ✓ ✓ ✓ Transmit intentions on 122.9 MHz when 10 miles out and
give position reports in the traffic pattern..
Contact Elizabeth City FSS for airport advisory service.
Contact New Bern FSS for area traffic information.
How should a VFR flight plan be closed at the completion of the flight at a controlled airport? Ans:
✓ ✓ ✓ The pilot must close the flight plan with the nearest FSS or other FAA facility upon landing..
The tower will relay the instructions to the nearest FSS when the aircraft contacts the tower for
landing.
© Get it right 2025 Getaway - Stuvia US All rights reserved
,Click here for more: Scholars nexus
The tower will automatically close the flight plan when the aircraft turns off the runway.
How will ATC respond when you declare "Minimum Fuel" status? Ans: ✓ ✓ ✓ They will be alert for
any occurrence which might delay the aircraft..
They will guarantee priority handling.
They will declare an emergency.
(Refer to figure 22, area 2; and figure 31.) What is the correct UNICOM frequency to be used at
Coeur D'Alene to request fuel? Ans: ✓ ✓ ✓ 122.1/108.8 MHz.
122.8 MHz..
135.075 MHz.
(Refer to figure 26, area 2.) What is the recommended communication procedure when inbound to
land at Cooperstown Airport? Ans: ✓ ✓ ✓ Broadcast intentions when 10 miles out on the
CTAF/MULTICOM frequency, 122.9 MHz..
© Get it right 2025 Getaway - Stuvia US All rights reserved
, Click here for more: Scholars nexus
Circle the airport in a left turn prior to entering traffic.
Contact UNICOM when 10 miles out on 122.8 MHz.
Inbound to an airport with no tower, FSS, or UNICOM in operation, a pilot should self-announce on
MULTICOM frequency Ans: ✓ ✓ ✓ 122.7.
122.9..
123.0.
If faced with an emergency where Air Traffic Control (ATC) assistance is desired and not already in
contact, which frequency can be used to establish communications? Ans: ✓ ✓ ✓ 122.5 MHz.
121.5 MHz..
128.725 MHz.
© Get it right 2025 Getaway - Stuvia US All rights reserved
