1|Page
CSLB CONCRETE C8 LICENSE PRACTICE TEST 3 LATEST 2025/2026 ACTUAL
EXAM WITH COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS
(100% VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR VERIFIED||
||BRANDNEW!!!||
The concrete repair works shall not be carried out if the
temperature is below________ ͨ F - ANSWER-40
Explanation:
Low temperature causes freezing and thawing.
The KEY difference between the form work and falsework is
___________. - ANSWER-Falsework is temporary
Explanation:
Falsework is temporary used for minor repair / short duration
work.
Which of the following not a component of a formwork? -
ANSWER-Rafter
,2|Page
The factor of safety used for the formwork loads is _______. -
ANSWER-2.0
All the concrete drainage facilities are to be designed to the
velocity equivalent to __________. - ANSWER-Self-cleansing
velocity
Standard sealers are generally __________. - ANSWER--Water
based
-Solvent based
Explanation:
Sealers are available in two variants, water based and
solvent based.
The specified length of the bend or loop for the reinforcement in
concreting if the diameter is greater than 3/5" is _________. -
ANSWER-7d
, 3|Page
Explanation:
Where 'd' is diameter of the bar. If the bar diameter is more
than 3/5" the length of the bend or loop is 7 times the bar
diameter.
The mechanical load transfer devices used for the concrete
pavement repair is/are: - ANSWER--Dowel bars
-Tie bars
The line that assures the desirable goal of keeping the travelled
way free of flooding is__________. - ANSWER-Grade line
Which of the following design parameters are to be considered
while designing the drainage for highway? - ANSWER--Cross
slope
-Longitudinal slope
-Height of the curb & dike
CSLB CONCRETE C8 LICENSE PRACTICE TEST 3 LATEST 2025/2026 ACTUAL
EXAM WITH COMPLETE QUESTIONS AND CORRECT DETAILED ANSWERS
(100% VERIFIED ANSWERS) |ALREADY GRADED A+| ||PROFESSOR VERIFIED||
||BRANDNEW!!!||
The concrete repair works shall not be carried out if the
temperature is below________ ͨ F - ANSWER-40
Explanation:
Low temperature causes freezing and thawing.
The KEY difference between the form work and falsework is
___________. - ANSWER-Falsework is temporary
Explanation:
Falsework is temporary used for minor repair / short duration
work.
Which of the following not a component of a formwork? -
ANSWER-Rafter
,2|Page
The factor of safety used for the formwork loads is _______. -
ANSWER-2.0
All the concrete drainage facilities are to be designed to the
velocity equivalent to __________. - ANSWER-Self-cleansing
velocity
Standard sealers are generally __________. - ANSWER--Water
based
-Solvent based
Explanation:
Sealers are available in two variants, water based and
solvent based.
The specified length of the bend or loop for the reinforcement in
concreting if the diameter is greater than 3/5" is _________. -
ANSWER-7d
, 3|Page
Explanation:
Where 'd' is diameter of the bar. If the bar diameter is more
than 3/5" the length of the bend or loop is 7 times the bar
diameter.
The mechanical load transfer devices used for the concrete
pavement repair is/are: - ANSWER--Dowel bars
-Tie bars
The line that assures the desirable goal of keeping the travelled
way free of flooding is__________. - ANSWER-Grade line
Which of the following design parameters are to be considered
while designing the drainage for highway? - ANSWER--Cross
slope
-Longitudinal slope
-Height of the curb & dike
