BC SHIFTBOSS EXAM QUESTIONS AND ANSWERS LATEST UPDATED
2025/2026 A COMPLETE BEST SOLUTION ALL ANSWERS 100%
CORRECT VERIFIED RATED A+ FOR SUCCESS
Give two possible ways that a manager may exempt a new employee from training programs:" -
CORRECT ANSWERS "- workers are adequately trained to do their job or are working
under the guidance of someone who has competency both in the job and in giving instructions.
- Ensure that all employees receive thorough orientation and basic instructions in safe work
practices.
""Who can order a supervisor be removed from his supervisory duties?""" - CORRECT
ANSWERS The Inspector of Mines.
"Who issues a Shiftboss, Fireboss, or competency certificate after an applicant demonstrates his
knowledge by passing an examination on the sections of the Mines Act and Code?" -
CORRECT ANSWERS Board of Examiners.
"Who may suspend a Shiftboss, Fireboss, or competency certificate?" - CORRECT
ANSWERS An Inspector.
"What are 3 reasons why a certificate of competency could be suspended?" - CORRECT
ANSWERS "- the holder fails to comply with the Act, the regulations, or the Code
- is by reason incompetent or negligent
- is unfit to carry out his duties
""How must emergency lighting be issued?""" - CORRECT ANSWERS "- Where it is part
of a permanent installation, turn on automatically when the normal lighting fails.
- Provide adequate illumination to allow employees to initiate emergency shutdown procedures
and leave their work areas safely.
- Be tested as frequently as necessary to ensure that it will function when required.
""The manager shall supply a source of cool potable drinking water for mine employees. True or
false?""" - CORRECT ANSWERS True.
"Pipes and vessels carrying drinking water shall not be fitted using solder containing more than
what percentage of lead?" - CORRECT ANSWERS One percent.
"Other than in an open pit mine, a lunchroom shall be provided where how many persons
congregate to eat?" - CORRECT ANSWERS Seven.
"A program of employee instruction and procedures to be followed when handling or using
controlled products must be developed by who?" - CORRECT ANSWERS The Manager.
,BC SHIFTBOSS EXAM QUESTIONS AND ANSWERS LATEST UPDATED
2025/2026 A COMPLETE BEST SOLUTION ALL ANSWERS 100%
CORRECT VERIFIED RATED A+ FOR SUCCESS
"When a worker is working alone the manager shall ensure a means exists for checking the
worker and the interval between checks shall not exceed how many hours?" - CORRECT
ANSWERS 2.5 hours.
"Where persons are required to work or be near water where drowning could be a risk, what
must be present? And if working alone or being transported across water what shall be
supplied by the manager?" - CORRECT ANSWERS Life buoys equipped with heavy lines,
and life jackets.
"Where there is a risk of hair, clothing, or dangling jewelry coming into contact with moving
parts of machinery or electrically energized equipment, the item must be worn snugly or what
else?" - CORRECT ANSWERS Not worn at all (except for medi-alert bracelets).
"Safe work procedures for work in confined spaces includes maintenance of an effective means
of communication between persons inside and outside the confined space. True or false?" -
CORRECT ANSWERS True.
"Who must insure fire fighting equipment is maintained at surface installations or any location
where fire may endanger life at a mine?" - CORRECT ANSWERS The Manager.
"All mine buildings shall be constructed in accordance with the BC Building Code. Drawing of
the completed buildings or structure and any revisions shall be kept at the mine. True or false?"
- CORRECT ANSWERS True.
"The manager shall ensure that all places where work is performed have safe means of access
and what else?" - CORRECT ANSWERS Egress and if necessary an alternative means of
escape.
"Walkways shall not be less than what width?" - CORRECT ANSWERS 500 millimeters.
"When persons are working in an area where there is danger of material falling onto the work
area what must be done?" - CORRECT ANSWERS Must have adequate protection for
their safety.
"Shoring and/or sloping of the walls of a trench is required if a trench is over what depth?" -
CORRECT ANSWERS 4 feet.
"What type(s) of underground work require the approval of the Chief Inspector of Mines before
work begins?" - CORRECT ANSWERS "-Exploration
-Develpment
-Production
,BC SHIFTBOSS EXAM QUESTIONS AND ANSWERS LATEST UPDATED
2025/2026 A COMPLETE BEST SOLUTION ALL ANSWERS 100%
CORRECT VERIFIED RATED A+ FOR SUCCESS
""How often should the manager update mine plans?""" - CORRECT ANSWERS
Updated in accordance with good engineering practice.
"No person shall enter any excavation over what height unless the sides are sloped to a safe
angle or the sides supported?" - CORRECT ANSWERS 4 feet.
"For how many metes shall excavated material be kept back from the edge of any trench
excavation?" - CORRECT ANSWERS 1 meter.
"What period of time, after receiving an inspections report, is a manager given to submit a
written report outlining what remedial steps have been taken?" - CORRECT ANSWERS
15 days.
"Who is required to notify the district inspector of the appointment of a Mine Manager?" -
CORRECT ANSWERS Owner or Agent.
"Who is responsible for establishing an OHSC?" - CORRECT ANSWERS Manager.
"Who is responsible for making regulations?" - CORRECT ANSWERS Lieutenant
Governor.
"Where a mine is not being operated in accordance with the Code, who may order the owner,
agent, or manager to comply with the code?" - CORRECT ANSWERS The Chief
Inspector.
"The Survivair or MSA 401 are examples of what kind of breathing apparatus?" - CORRECT
ANSWERS Self contained - open circuit
"In the event of a malfunction in the regulator of an S.C.O.C breathing apparatus (MSA 401 04
Survivair), the wearer would use this:" - CORRECT ANSWERS Bypass valve.
"There are 3 main tests prior to donating a B.A. One of them is "air tightness", one of the other
two is:" - CORRECT ANSWERS Audio alarm check.
"At approximately what pressure does the alarm bell operate on a pressure demand
apparatus?" - CORRECT ANSWERS 20-25%
"What instructions would you give a haul truck driver if a power line was snagged on the cab of
his vehicle?" - CORRECT ANSWERS Stay seated until the electrical crew has
disconnected the power.
"Before beginning a rescue operation when a high voltage electric system is involved, who is
responsible for ensuring that electrical equipment is properly locked out and tagged?" -
, BC SHIFTBOSS EXAM QUESTIONS AND ANSWERS LATEST UPDATED
2025/2026 A COMPLETE BEST SOLUTION ALL ANSWERS 100%
CORRECT VERIFIED RATED A+ FOR SUCCESS
CORRECT ANSWERS Each rescue worker who may be affected by the electrical
equipment if energized.
"Name 3 semiconductors:" - CORRECT ANSWERS Wood, soil, rubber tires.
"Step potential and touch potential refers to:" - CORRECT ANSWERS Dangers
associated with voltage gradients.
"High voltage is anything over:" - CORRECT ANSWERS 750 Volts
"True or False: DC current has a tendency to set the muscles into spasm or involuntary
contractions on contact." - CORRECT ANSWERS True
"Severe electrical shock may paralyze the:" - CORRECT ANSWERS Respiratory center in
the brain.
"A patient suffering from electrical shock, upon revival, should be:" - CORRECT
ANSWERS Kept quiet, at rest and observed.
"AC current is more dangerous than DC current. True or False?" - CORRECT ANSWERS
True.
"Severe electrical shock may affect the what?" - CORRECT ANSWERS Circulatory
system.
"Which of the following is a common basic fat concerning electricity?" - CORRECT
ANSWERS Electricity always seeks the easiest path to the ground.
"Ventricular fibrillation may be caused by an electrical shock of relatively low votage. What is
this condition?" - CORRECT ANSWERS A useless fluttering of the heart muscle.
"What instructions would you give a driver if a downed power line lies across his vehicle?" -
CORRECT ANSWERS Stay in the vehicle until the electrical crew has disconnected the
line.
"In an electrical system the force or pressure causing the flow of electricity is measure in
what?" - CORRECT ANSWERS Volts.
"The first priority in setting up a plan of action in the event of an emergency is what?" -
CORRECT ANSWERS Primary escape routes.
"The Mine Manager is responsible for the control of rescue operations at a mine. True or
false?" - CORRECT ANSWERS False.
2025/2026 A COMPLETE BEST SOLUTION ALL ANSWERS 100%
CORRECT VERIFIED RATED A+ FOR SUCCESS
Give two possible ways that a manager may exempt a new employee from training programs:" -
CORRECT ANSWERS "- workers are adequately trained to do their job or are working
under the guidance of someone who has competency both in the job and in giving instructions.
- Ensure that all employees receive thorough orientation and basic instructions in safe work
practices.
""Who can order a supervisor be removed from his supervisory duties?""" - CORRECT
ANSWERS The Inspector of Mines.
"Who issues a Shiftboss, Fireboss, or competency certificate after an applicant demonstrates his
knowledge by passing an examination on the sections of the Mines Act and Code?" -
CORRECT ANSWERS Board of Examiners.
"Who may suspend a Shiftboss, Fireboss, or competency certificate?" - CORRECT
ANSWERS An Inspector.
"What are 3 reasons why a certificate of competency could be suspended?" - CORRECT
ANSWERS "- the holder fails to comply with the Act, the regulations, or the Code
- is by reason incompetent or negligent
- is unfit to carry out his duties
""How must emergency lighting be issued?""" - CORRECT ANSWERS "- Where it is part
of a permanent installation, turn on automatically when the normal lighting fails.
- Provide adequate illumination to allow employees to initiate emergency shutdown procedures
and leave their work areas safely.
- Be tested as frequently as necessary to ensure that it will function when required.
""The manager shall supply a source of cool potable drinking water for mine employees. True or
false?""" - CORRECT ANSWERS True.
"Pipes and vessels carrying drinking water shall not be fitted using solder containing more than
what percentage of lead?" - CORRECT ANSWERS One percent.
"Other than in an open pit mine, a lunchroom shall be provided where how many persons
congregate to eat?" - CORRECT ANSWERS Seven.
"A program of employee instruction and procedures to be followed when handling or using
controlled products must be developed by who?" - CORRECT ANSWERS The Manager.
,BC SHIFTBOSS EXAM QUESTIONS AND ANSWERS LATEST UPDATED
2025/2026 A COMPLETE BEST SOLUTION ALL ANSWERS 100%
CORRECT VERIFIED RATED A+ FOR SUCCESS
"When a worker is working alone the manager shall ensure a means exists for checking the
worker and the interval between checks shall not exceed how many hours?" - CORRECT
ANSWERS 2.5 hours.
"Where persons are required to work or be near water where drowning could be a risk, what
must be present? And if working alone or being transported across water what shall be
supplied by the manager?" - CORRECT ANSWERS Life buoys equipped with heavy lines,
and life jackets.
"Where there is a risk of hair, clothing, or dangling jewelry coming into contact with moving
parts of machinery or electrically energized equipment, the item must be worn snugly or what
else?" - CORRECT ANSWERS Not worn at all (except for medi-alert bracelets).
"Safe work procedures for work in confined spaces includes maintenance of an effective means
of communication between persons inside and outside the confined space. True or false?" -
CORRECT ANSWERS True.
"Who must insure fire fighting equipment is maintained at surface installations or any location
where fire may endanger life at a mine?" - CORRECT ANSWERS The Manager.
"All mine buildings shall be constructed in accordance with the BC Building Code. Drawing of
the completed buildings or structure and any revisions shall be kept at the mine. True or false?"
- CORRECT ANSWERS True.
"The manager shall ensure that all places where work is performed have safe means of access
and what else?" - CORRECT ANSWERS Egress and if necessary an alternative means of
escape.
"Walkways shall not be less than what width?" - CORRECT ANSWERS 500 millimeters.
"When persons are working in an area where there is danger of material falling onto the work
area what must be done?" - CORRECT ANSWERS Must have adequate protection for
their safety.
"Shoring and/or sloping of the walls of a trench is required if a trench is over what depth?" -
CORRECT ANSWERS 4 feet.
"What type(s) of underground work require the approval of the Chief Inspector of Mines before
work begins?" - CORRECT ANSWERS "-Exploration
-Develpment
-Production
,BC SHIFTBOSS EXAM QUESTIONS AND ANSWERS LATEST UPDATED
2025/2026 A COMPLETE BEST SOLUTION ALL ANSWERS 100%
CORRECT VERIFIED RATED A+ FOR SUCCESS
""How often should the manager update mine plans?""" - CORRECT ANSWERS
Updated in accordance with good engineering practice.
"No person shall enter any excavation over what height unless the sides are sloped to a safe
angle or the sides supported?" - CORRECT ANSWERS 4 feet.
"For how many metes shall excavated material be kept back from the edge of any trench
excavation?" - CORRECT ANSWERS 1 meter.
"What period of time, after receiving an inspections report, is a manager given to submit a
written report outlining what remedial steps have been taken?" - CORRECT ANSWERS
15 days.
"Who is required to notify the district inspector of the appointment of a Mine Manager?" -
CORRECT ANSWERS Owner or Agent.
"Who is responsible for establishing an OHSC?" - CORRECT ANSWERS Manager.
"Who is responsible for making regulations?" - CORRECT ANSWERS Lieutenant
Governor.
"Where a mine is not being operated in accordance with the Code, who may order the owner,
agent, or manager to comply with the code?" - CORRECT ANSWERS The Chief
Inspector.
"The Survivair or MSA 401 are examples of what kind of breathing apparatus?" - CORRECT
ANSWERS Self contained - open circuit
"In the event of a malfunction in the regulator of an S.C.O.C breathing apparatus (MSA 401 04
Survivair), the wearer would use this:" - CORRECT ANSWERS Bypass valve.
"There are 3 main tests prior to donating a B.A. One of them is "air tightness", one of the other
two is:" - CORRECT ANSWERS Audio alarm check.
"At approximately what pressure does the alarm bell operate on a pressure demand
apparatus?" - CORRECT ANSWERS 20-25%
"What instructions would you give a haul truck driver if a power line was snagged on the cab of
his vehicle?" - CORRECT ANSWERS Stay seated until the electrical crew has
disconnected the power.
"Before beginning a rescue operation when a high voltage electric system is involved, who is
responsible for ensuring that electrical equipment is properly locked out and tagged?" -
, BC SHIFTBOSS EXAM QUESTIONS AND ANSWERS LATEST UPDATED
2025/2026 A COMPLETE BEST SOLUTION ALL ANSWERS 100%
CORRECT VERIFIED RATED A+ FOR SUCCESS
CORRECT ANSWERS Each rescue worker who may be affected by the electrical
equipment if energized.
"Name 3 semiconductors:" - CORRECT ANSWERS Wood, soil, rubber tires.
"Step potential and touch potential refers to:" - CORRECT ANSWERS Dangers
associated with voltage gradients.
"High voltage is anything over:" - CORRECT ANSWERS 750 Volts
"True or False: DC current has a tendency to set the muscles into spasm or involuntary
contractions on contact." - CORRECT ANSWERS True
"Severe electrical shock may paralyze the:" - CORRECT ANSWERS Respiratory center in
the brain.
"A patient suffering from electrical shock, upon revival, should be:" - CORRECT
ANSWERS Kept quiet, at rest and observed.
"AC current is more dangerous than DC current. True or False?" - CORRECT ANSWERS
True.
"Severe electrical shock may affect the what?" - CORRECT ANSWERS Circulatory
system.
"Which of the following is a common basic fat concerning electricity?" - CORRECT
ANSWERS Electricity always seeks the easiest path to the ground.
"Ventricular fibrillation may be caused by an electrical shock of relatively low votage. What is
this condition?" - CORRECT ANSWERS A useless fluttering of the heart muscle.
"What instructions would you give a driver if a downed power line lies across his vehicle?" -
CORRECT ANSWERS Stay in the vehicle until the electrical crew has disconnected the
line.
"In an electrical system the force or pressure causing the flow of electricity is measure in
what?" - CORRECT ANSWERS Volts.
"The first priority in setting up a plan of action in the event of an emergency is what?" -
CORRECT ANSWERS Primary escape routes.
"The Mine Manager is responsible for the control of rescue operations at a mine. True or
false?" - CORRECT ANSWERS False.
