SOS MECHANIC CERTIFICATION (2025-2026)
EXAM QUESTIONS & CORRECT ANSWERS 100%
SOLVED| GUARANTEED SUCCESS!!
Which of the following is Most ABS brake lines can be bled like a conventional
true about bleeding brake (non-ABS) system. However, caution must be taken
lines on most ABS because of the extreme pressure.
equipped vehicles?
Most anti-lock brake a "spaced-saver" spare tire is being used and
systems require the mismatched tires are being installed
removal of the pressure
modulator fuse when:
What does a load sensing It increases the hydraulic pressure during braking at
proportioning valve do? the rear wheel cylinders when the vehicle is loaded
The brakes of a car squeal Glazed brake pads
each time they are
applied, which of the
following is the LEAST
likely source of the noise?
Which of the following is a They provide better braking balance during hard
true statement about stops
proportioning valves?
A properly functioning cause an increase in the hydraulic pressure during
load sensing braking at the rear wheel cylinders when the vehicle is
proportioning valve will: loaded.
Why don't disc brake A certain amount of pressure is maintained by the
system usually need metering valve
adjustment?
, 8/14/25, 11:58 PM …
The front brakes of a car Defective metering valve
equipped with disc brakes
in the front and drum
brakes in the rear, grab
quickly as light pressure is
applied to the brake
pedal, which of the
following could be the
cause of the problem?
Most 1995 & newer Sealed non-serviceable
vehicles use which of the
following types of wheels
bearings on non-drive
wheel?
to test a vacuum power drop slightly and remain firm
brake booster in the
vehicle, you should pump
the brake pedal at least 4
times, hold the brake
pedal depressed, and
start the engine. the brake
pedal should:
You are installing a set of Smaller and goes towards the front of the car.
brake shoe linings that are
not the same length.
Traditionally, the primary
shoe lining is:
… 2/12
EXAM QUESTIONS & CORRECT ANSWERS 100%
SOLVED| GUARANTEED SUCCESS!!
Which of the following is Most ABS brake lines can be bled like a conventional
true about bleeding brake (non-ABS) system. However, caution must be taken
lines on most ABS because of the extreme pressure.
equipped vehicles?
Most anti-lock brake a "spaced-saver" spare tire is being used and
systems require the mismatched tires are being installed
removal of the pressure
modulator fuse when:
What does a load sensing It increases the hydraulic pressure during braking at
proportioning valve do? the rear wheel cylinders when the vehicle is loaded
The brakes of a car squeal Glazed brake pads
each time they are
applied, which of the
following is the LEAST
likely source of the noise?
Which of the following is a They provide better braking balance during hard
true statement about stops
proportioning valves?
A properly functioning cause an increase in the hydraulic pressure during
load sensing braking at the rear wheel cylinders when the vehicle is
proportioning valve will: loaded.
Why don't disc brake A certain amount of pressure is maintained by the
system usually need metering valve
adjustment?
, 8/14/25, 11:58 PM …
The front brakes of a car Defective metering valve
equipped with disc brakes
in the front and drum
brakes in the rear, grab
quickly as light pressure is
applied to the brake
pedal, which of the
following could be the
cause of the problem?
Most 1995 & newer Sealed non-serviceable
vehicles use which of the
following types of wheels
bearings on non-drive
wheel?
to test a vacuum power drop slightly and remain firm
brake booster in the
vehicle, you should pump
the brake pedal at least 4
times, hold the brake
pedal depressed, and
start the engine. the brake
pedal should:
You are installing a set of Smaller and goes towards the front of the car.
brake shoe linings that are
not the same length.
Traditionally, the primary
shoe lining is:
… 2/12
