Texas Mold Assessment Consultant Exam All Possible
Questions and Answers with complete solution
/. the Texas mold assessment and remediation rules states that notice signs must be
legible from - Answer-10 feet
/.after completing any training course required by the Texas mold assessment and
remediation rules, how long do you have to take and pass the state examination -
Answer-6 months
/.the assigned protection factor (PF) for an N-95 respirator is - Answer-there is no PF
rating for an N-95 respirator
/.According to the EPA"mold remediation in schools and commercial buildings"
document, the EPA recommends the following for cleanup of books and papers that
were damaged with clear water within 24-48 hours - Answer-discard all books and
papers, photocopy and discard originals, and freeze or freeze-dry originals
/.when sampling with a spore trap you are usually trying to determine - Answer-
identification of viable mild spores
/.which of the following sampling devices would you use to determine respirable and
non-respirable viable airborne mold spores? - Answer-air-o-cell cassette
/.according to the Texas mold assessment and remediation rules, if a contractor is
working under the exceptions and exemptions subsection and identifies additional mold
that affects a total surface area of more than 25 contiguous square feet they shall -
Answer-Immediately cease all remediation work and implement emergency containment
if necessary
/.according to the Texas mold assessment and remediation rules, a containment area is
defined as - Answer-an area that has been enclosed to control the release of mold or
mold-containing vapors into the surrounding area
/.a musty odor indoors usually indicates - Answer-microbial growth
/.skin and eye protection during the remediation process is used to protect workers from
- Answer-mold toxins and spores, dust mites, and cleaning products
/.according to the Texas mold assessment and remediation rules the required clearance
level of mold spores is - Answer-N/A
, /.which sampling method would you use to determine both viable and non- viable mold
concentrations in the air - Answer-air-o-cell-cassette
/.according to the EPA's "mold remediation in schools and commercial buildings"
document, the EPA recommends the following for cleanup for non-porous hard surface
areas - Answer-cleaned with detergent solution
/.what is the normal air flow rate an air-o-cell cassette - Answer-15 liters/minute
/.according to the. EPA's "mold remediation in schools and commercial buildings", it is
recommended that water damaged cellulose ceiling tiles should. be - Answer-discarded
/.what is the normal air flow rater used for an Andersen sampler - Answer-28.3
liters/minute
/.according to the Texas mold assessment and remediation rules, who can write a mold
management plan? - Answer-a licensed mold assessment consultant
/.according to the Texas mold assessment and remediation rules, a mold assessment
consultant may perform an assessment to - Answer-collect data for writing a mold
assessment report
/.health effects from inhalation of mold spores could be - Answer-Hypersensitivity
pneumonitis
/.according to the Texas mold assessment and remediation rules, mold is defines as -
Answer-spores, hyphae, mycotoxins, and living or dead fungi
/.according to the Texas mold assessment and remediation rules, the purpose of a mold
assessment is to - Answer-determine the sources, locations and extent of mold growth
in a building / determine the condition(s) that caused the mold growth / and enable the
assessment consultant to prepare a mold remediation protocol
/.according to the Texas mold assessment and remediation rules, a licensed mold
assessment company or consultant shall maintain records until - Answer-the company
or consultant issues a mold assessment report, management plan, or remediation
protocol to a client, if the company or consultant performs. only the initial assessment
for the project / the company or consultant issues the final. status report to the client, if
a. final status report is issued / and the company or consultant provides the. signed.
certificate of mold remediation to a mold remediation contractor or company, if a
certificate of mold remediation is provided
/.according to the Texas mold assessment and remediation rules, a post remediation
assessment shall determine if - Answer-the work area is free of all visible mold and
Questions and Answers with complete solution
/. the Texas mold assessment and remediation rules states that notice signs must be
legible from - Answer-10 feet
/.after completing any training course required by the Texas mold assessment and
remediation rules, how long do you have to take and pass the state examination -
Answer-6 months
/.the assigned protection factor (PF) for an N-95 respirator is - Answer-there is no PF
rating for an N-95 respirator
/.According to the EPA"mold remediation in schools and commercial buildings"
document, the EPA recommends the following for cleanup of books and papers that
were damaged with clear water within 24-48 hours - Answer-discard all books and
papers, photocopy and discard originals, and freeze or freeze-dry originals
/.when sampling with a spore trap you are usually trying to determine - Answer-
identification of viable mild spores
/.which of the following sampling devices would you use to determine respirable and
non-respirable viable airborne mold spores? - Answer-air-o-cell cassette
/.according to the Texas mold assessment and remediation rules, if a contractor is
working under the exceptions and exemptions subsection and identifies additional mold
that affects a total surface area of more than 25 contiguous square feet they shall -
Answer-Immediately cease all remediation work and implement emergency containment
if necessary
/.according to the Texas mold assessment and remediation rules, a containment area is
defined as - Answer-an area that has been enclosed to control the release of mold or
mold-containing vapors into the surrounding area
/.a musty odor indoors usually indicates - Answer-microbial growth
/.skin and eye protection during the remediation process is used to protect workers from
- Answer-mold toxins and spores, dust mites, and cleaning products
/.according to the Texas mold assessment and remediation rules the required clearance
level of mold spores is - Answer-N/A
, /.which sampling method would you use to determine both viable and non- viable mold
concentrations in the air - Answer-air-o-cell-cassette
/.according to the EPA's "mold remediation in schools and commercial buildings"
document, the EPA recommends the following for cleanup for non-porous hard surface
areas - Answer-cleaned with detergent solution
/.what is the normal air flow rate an air-o-cell cassette - Answer-15 liters/minute
/.according to the. EPA's "mold remediation in schools and commercial buildings", it is
recommended that water damaged cellulose ceiling tiles should. be - Answer-discarded
/.what is the normal air flow rater used for an Andersen sampler - Answer-28.3
liters/minute
/.according to the Texas mold assessment and remediation rules, who can write a mold
management plan? - Answer-a licensed mold assessment consultant
/.according to the Texas mold assessment and remediation rules, a mold assessment
consultant may perform an assessment to - Answer-collect data for writing a mold
assessment report
/.health effects from inhalation of mold spores could be - Answer-Hypersensitivity
pneumonitis
/.according to the Texas mold assessment and remediation rules, mold is defines as -
Answer-spores, hyphae, mycotoxins, and living or dead fungi
/.according to the Texas mold assessment and remediation rules, the purpose of a mold
assessment is to - Answer-determine the sources, locations and extent of mold growth
in a building / determine the condition(s) that caused the mold growth / and enable the
assessment consultant to prepare a mold remediation protocol
/.according to the Texas mold assessment and remediation rules, a licensed mold
assessment company or consultant shall maintain records until - Answer-the company
or consultant issues a mold assessment report, management plan, or remediation
protocol to a client, if the company or consultant performs. only the initial assessment
for the project / the company or consultant issues the final. status report to the client, if
a. final status report is issued / and the company or consultant provides the. signed.
certificate of mold remediation to a mold remediation contractor or company, if a
certificate of mold remediation is provided
/.according to the Texas mold assessment and remediation rules, a post remediation
assessment shall determine if - Answer-the work area is free of all visible mold and
