BICSI IN101, V8.0 Day 1 - 2025 with complete verified solutions (Guaranteed Success ).

B ICSI IN101, V8.0 Day 1 - 2025 w ith
com plete ver ifi ed solution s
(Guar an teed Success )
AHJ - answer Abbreviation of authority having jurisdiction. The
building official, electrical inspector, fire marshal, or other
individuals or entities responsible for interpretation and
enforcement of local building and electrical codes. (ITSIMM, page
A-1 to A-2) 02_PROFESSIONALISM AND PROJECT PLANNING


A drawings - answer Architectural drawings show a plan (top)
view of each floor in a building. They include all aspects of the
physical construction of the buiding, which provide the detail for
such items as wall types, elevations, rated construction (fire and
smoke), reflected ceiling plans,door hardware schedule, exact
floor penetration dimensions, cabinetry, and furnishings. If the
architect employs interior designers, their work will be reflected
on these drawings.(ITSIMM, page 10-5) 02_PROFESSIONALISM
AND PROJECT PLANNING


Code - answer A rule or set of rules intended to ensure safety
during the installation and use of materials, components, fixtures,
systems, premises, and related subjects. Codes typically are
invoked and enforced through government regulation. (ITSIMM,
page 3-52) 02_PROFESSIONALISM AND PROJECT PLANNING

,E drawings - answer Electrical drawings are very important to ICT
systems cabling installers. They indicate where the electrical
services are installed inside the building and the pathways that
may be installed by the electrical contractor for use by the cabling
installation team. The drawings indicate the grounding system
installed by the electrical contractor and the location of
supporting structures installed by the electrical contractor (e.g.,
floor boxes, cable tray, surface raceway, poke-thrus, duct banks).
(ITSIMM, page 10-5) 02_PROFESSIONALISM AND PROJECT
PLANNING


FP drawings - answer Fire protection drawings show the size and
route of fire suppression system piping and associated fire
suppression agent heads and nozzles within the structures.
(ITSIMM, page 10-5) 02_PROFESSIONALISM AND PROJECT
PLANNING


ICT - answer Abbreviation of Information and Communications
Technology. (ITSIMM, page A-1) 02_PROFESSIONALISM AND
PROJECT PLANNING


M drawings - answer Mechanical drawings indicate the size and
route of the HVAC system ducts, air handler units, chilled water

, piping, and refrigerant piping within the structures. (ITSIMM,
page 10-5) 02_PROFESSIONALISM AND PROJECT PLANNING


P drawings - answer Plumbing drawings indicate the size and
route of potable water, specialized water, sanitary sewer, and
rainwater roof drain piping within the structures. (ITSIMM, page
10-5) 02_PROFESSIONALISM AND PROJECT PLANNING


Regulation - answer An authoritative rule that controls or governs
behavior leading to uniformity. (ITSIMM, page A-2)
02_PROFESSIONALISM AND PROJECT PLANNING


S drawing - answer Structural drawings show the location of all
components of the building structure itself— the steel beams,
concrete floors, exterior walls, and other components that make
up the basic structure. The plans contain detailed sectionalized
drawings that give both a plan (top) view and an elevation (side)
view of the structures. (ITSIMM, page 10-5)
02_PROFESSIONALISM AND PROJECT PLANNING


Standard - answer A collection of specifications that encompass
properties of components, systems, and practices intended to
ensure an accepted minimum degree of functionality and
longevity (performance). Standards are intended to reflect
accepted norms as typically determined either through a balloting