week 9 voacb mep 326
Human Machine Interface - answerAn interface terminal that allows an individual to
access and respond to building automation system information.
Solenoid - answerA device that converts electrical energy into a linear mechanical force.
Electric Motor - answerA device that converts electrical energy into rotating mechanical
energy.
Analog Signal - answerA signal that has a continuous range of possible values between
two points.
protocol - answerA set of rules and procedures for the exchange of information between
two connected devices.
I/O Port - answerA socket on a controller that a cable is plugged into.
Digital Signal - answerA signal that has only two possible states.
control point - answerA variable in a control system.
Setpoint - answerthe desired value to The desired value to be maintained by a system.
Offset - answerThe difference between the value of a control point and it corresponding
setpoint.
Deadband - answerThe range between two setpoints in which no control action takes
place.
Electromechanical Device - answerA sensor in which an electrical signal creates
mechanical movement, or vice versa mechanical movement creates an electric signal.
Project Closeout Information - answerA set of documents produced by the control's
contractor for the owner's use while operating the building.
Access Control (AC) - answerThe selective restriction of access to a place or other
resource.
Consulting-Specifying Engineer - answerA building automation professional that design
the building automation system from the owner's list of desired features.
Human Machine Interface - answerAn interface terminal that allows an individual to
access and respond to building automation system information.
Solenoid - answerA device that converts electrical energy into a linear mechanical force.
Electric Motor - answerA device that converts electrical energy into rotating mechanical
energy.
Analog Signal - answerA signal that has a continuous range of possible values between
two points.
protocol - answerA set of rules and procedures for the exchange of information between
two connected devices.
I/O Port - answerA socket on a controller that a cable is plugged into.
Digital Signal - answerA signal that has only two possible states.
control point - answerA variable in a control system.
Setpoint - answerthe desired value to The desired value to be maintained by a system.
Offset - answerThe difference between the value of a control point and it corresponding
setpoint.
Deadband - answerThe range between two setpoints in which no control action takes
place.
Electromechanical Device - answerA sensor in which an electrical signal creates
mechanical movement, or vice versa mechanical movement creates an electric signal.
Project Closeout Information - answerA set of documents produced by the control's
contractor for the owner's use while operating the building.
Access Control (AC) - answerThe selective restriction of access to a place or other
resource.
Consulting-Specifying Engineer - answerA building automation professional that design
the building automation system from the owner's list of desired features.
