AWWA Operator Certification Study Guide 4th
ED. - Water Treatment exam questions and verified
answers
Which of the following well types is most protected from surface contamination? - ANSWER
Artesian Well
One major factor that leads to reservoir turnover is... - ANSWER The upper strata becoming
more dense and sinking to the bottom
What is the pressure in pounds per square inch at the bottom of a standpipe filled to a height of
47 feet? - ANSWER 20.3
One gallon per minute equals _____ gallons per day. - ANSWER 1,440
Which of the following elements cause hardness in water? - ANSWER Calcium and Magnesium
Chlorine demand increases when _____ increases. - ANSWER organic matter
How many gallons of water are in a tank 84 inches in diameter by 20 feet high when the water is
16 feet deep? - ANSWER 4,603
The electrical load placed on a single circuit... - ANSWER should be limited by the maximum
current rating of the wiring and switches
, Chlorine is most commonly used in water treatment for... - ANSWER disinfection
Sedimentation is a process that _____ suspended matter. - ANSWER settles
Fusible plugs on chlorine cylinders are designed to melt at... - ANSWER 158 degrees Farenheit
In general, when the pH of treated water is below 6.5, it indicates which of the following? -
ANSWER water that tends to be corrosive
When a permit is required to enter a confined space, who may sign the permit? - ANSWER the
supervisor
The main objection to "red water" is that it... - ANSWER stains plumbing and clothes
one cubic foot of water weighs... - ANSWER 62.40 pounds
Daily consumption of gaseous chlorine may be checked by... - ANSWER a platform scale
The permissible exposure limit (PEL) for chlorine is... - ANSWER 0.5 ppm
A single sample taken without considering the time of the day or the rate of flow is called a
_____ sample. - ANSWER grab
The Total Coliform Rule is based first on... - ANSWER Presence or absence of coliforms in a
sample
ED. - Water Treatment exam questions and verified
answers
Which of the following well types is most protected from surface contamination? - ANSWER
Artesian Well
One major factor that leads to reservoir turnover is... - ANSWER The upper strata becoming
more dense and sinking to the bottom
What is the pressure in pounds per square inch at the bottom of a standpipe filled to a height of
47 feet? - ANSWER 20.3
One gallon per minute equals _____ gallons per day. - ANSWER 1,440
Which of the following elements cause hardness in water? - ANSWER Calcium and Magnesium
Chlorine demand increases when _____ increases. - ANSWER organic matter
How many gallons of water are in a tank 84 inches in diameter by 20 feet high when the water is
16 feet deep? - ANSWER 4,603
The electrical load placed on a single circuit... - ANSWER should be limited by the maximum
current rating of the wiring and switches
, Chlorine is most commonly used in water treatment for... - ANSWER disinfection
Sedimentation is a process that _____ suspended matter. - ANSWER settles
Fusible plugs on chlorine cylinders are designed to melt at... - ANSWER 158 degrees Farenheit
In general, when the pH of treated water is below 6.5, it indicates which of the following? -
ANSWER water that tends to be corrosive
When a permit is required to enter a confined space, who may sign the permit? - ANSWER the
supervisor
The main objection to "red water" is that it... - ANSWER stains plumbing and clothes
one cubic foot of water weighs... - ANSWER 62.40 pounds
Daily consumption of gaseous chlorine may be checked by... - ANSWER a platform scale
The permissible exposure limit (PEL) for chlorine is... - ANSWER 0.5 ppm
A single sample taken without considering the time of the day or the rate of flow is called a
_____ sample. - ANSWER grab
The Total Coliform Rule is based first on... - ANSWER Presence or absence of coliforms in a
sample