Page | 1
ICC VAPOR RECOVERY 1 2025 BRAND
NEW ACTUAL EXAM WITH ANSWERS.
According to PEI-300 a "written scope of work" for vapor recovery
should include ____.
a. permit fees
b. construction plans
c. hours of station operation
d. applicable air district rules - correct answer -b. construction
plans
If fuel is spilled onto the ground
a. leave it to evaporate
b. use absorbent then place in dumpster
c. use absorbent, let soak for a couple hours then put in dumpster
d. use absorbent, completely remove all liquid from around then
dispose into proper container - correct answer -d. use absorbent,
completely remove all liquid from around then dispose into proper
container
, Page | 2
In a vapor recovery balance system, the liquid removal device
pick-up is located in the bottom of the ____.
a. dispenser
b. breakaway
c. hose loop between the dispenser and the retractor
d. hose loop when the nozzle spout is inserted into the vehicle fill
pipe - correct answer -d. hose loop when the nozzle spout is
inserted into the vehicle fill pipe
A balance type of nozzle is not supposed to dispense fuel unless
____.
a. the fuel is paid for
b. the bellow is depressed
c. the nozzle lever is squeezed
d. the onboard canister is dry - correct answer -b. the bellow is
depressed
The overfill prevention device shall meet any of the following
requirements except ____.
, Page | 3
a. alert the transfer operator when the tanks is 90% full by
restricting flow
b. provide positive shutoff of flow to the tank when the tank is
filled to 95% capacity
c. provide for manual override of the shutoff device if the fuel
remains in the delivery vehicle
d. provide positive shutoff to the tank so none of the fittings
located on the tank top are exposed to product due to overfilling -
correct answer -c. provide for manual override of the shutoff
device if the fuel remains in the delivery vehicle
A positive shut-off overfill prevention device (overfill valve) must
stop the flow of fuel when the tank is no more than ____%
percent full.
a. 85%
b. 95"
c. 90%
d. 95% - correct answer -d. 95%
On a manifold phase I vapor recovery system, all of the following
are true except ____.
a. the vent piping of two or more tanks may be manifolded
ICC VAPOR RECOVERY 1 2025 BRAND
NEW ACTUAL EXAM WITH ANSWERS.
According to PEI-300 a "written scope of work" for vapor recovery
should include ____.
a. permit fees
b. construction plans
c. hours of station operation
d. applicable air district rules - correct answer -b. construction
plans
If fuel is spilled onto the ground
a. leave it to evaporate
b. use absorbent then place in dumpster
c. use absorbent, let soak for a couple hours then put in dumpster
d. use absorbent, completely remove all liquid from around then
dispose into proper container - correct answer -d. use absorbent,
completely remove all liquid from around then dispose into proper
container
, Page | 2
In a vapor recovery balance system, the liquid removal device
pick-up is located in the bottom of the ____.
a. dispenser
b. breakaway
c. hose loop between the dispenser and the retractor
d. hose loop when the nozzle spout is inserted into the vehicle fill
pipe - correct answer -d. hose loop when the nozzle spout is
inserted into the vehicle fill pipe
A balance type of nozzle is not supposed to dispense fuel unless
____.
a. the fuel is paid for
b. the bellow is depressed
c. the nozzle lever is squeezed
d. the onboard canister is dry - correct answer -b. the bellow is
depressed
The overfill prevention device shall meet any of the following
requirements except ____.
, Page | 3
a. alert the transfer operator when the tanks is 90% full by
restricting flow
b. provide positive shutoff of flow to the tank when the tank is
filled to 95% capacity
c. provide for manual override of the shutoff device if the fuel
remains in the delivery vehicle
d. provide positive shutoff to the tank so none of the fittings
located on the tank top are exposed to product due to overfilling -
correct answer -c. provide for manual override of the shutoff
device if the fuel remains in the delivery vehicle
A positive shut-off overfill prevention device (overfill valve) must
stop the flow of fuel when the tank is no more than ____%
percent full.
a. 85%
b. 95"
c. 90%
d. 95% - correct answer -d. 95%
On a manifold phase I vapor recovery system, all of the following
are true except ____.
a. the vent piping of two or more tanks may be manifolded
