CDC 2A354N Integrated Fighter Avionic Systems Journeyman Written Self Test Questions 2025

What are some responsibilities with which a maintenance technician is charged? - - Comply with all written guidance -Ensure all required repairs, inspections, and documentation -Complete tasks in a safe and timely manner -After fixing a malfunction, following up with follow on maintenance. What type of issue is maintenance accountability? - -An integrity issue Who can be held accountable for an aircraft mishap if the investigation proves maintenance negligence? - -The maintenance technician What are the two major categories of maintenance? - -On equipment and off equipment Any action performed on an aircraft is? - -On equipment maintenance Any action performed in a back shop because of aircraft maintenance is? - -Off equipment maintenance What are the three levels of maintenance? - -Organizational, Intermediate, and Depot What level of maintenance consists of on equipment tasks performed at an operating location? - -Organizational What type of maintenance do you provide to your squadron? - -Organizational What level of maintenance consists of off equipment (back shop) tasks normally performed at the operating location? - -Intermediate What level of maintenance consists of on and off equipment tasks performed at either a major repair center, or in some cases, and operating location? - -Depot Which level of maintenance is modified or eliminated under the two level maintenance approach? - -Intermediate Within the AF Combat Wing Organization, who is the key individual controlling the resources to meet mission requirements? - -The wing commander. CDC CDC Wing commanders now organize all wing maintenance functions under which group? - The maintenance group (MXG) Who is responsible for aerospace equipment required to ensure balance between sortie production and fleet requirement? - -The maintenance group commander (MXG/CC) Which squadron within the maintenance group is responsible for off equipment (back shop) maintenance? - -The maintenance squadron (MXS) To which squadron is QA assigned? For whom does QA work? - --The maintenance operations squadron (MOS) -The maintenance group commander (MXG/CC) Which squadron services, inspects, maintains, launches and recovers assigned aircraft? - -The aircraft maintenance squadron (AMXS) Who allocates personnel and resources to the production effort? - -The AMU (OIC) officer in charge/ Non commissioned officer in charge (NCOIC) Who is responsible for flight maintenance production? - -Pro-Super When is maintenance debriefing conducted? - -At the termination of each sortie or when a sortie is aborted. What section is the focal point for all planned maintenance, TCTO, TCI, and inspections? - -The AMU PS&D What does the weapons section provide? - -Weapons loading and weapons maintenance Which section controls the CTK and equipment storage and maintains TO files for the squadron? - -Support Section To which section does an avionics technician normally belong? - -The specialists section What are the three types of maintenance? - --Preventative -Scheduled -Unscheduled Why is preventative maintenance performed? - -To provide normal upkeep and preservation of equipment. Which type of maintenance applies to maintenance requirements that can be programmed on either a short or long range schedule? - -Scheduled maintenance CDC CDC Which type of maintenance are you performing when you're repairing a discrepancy discovered in flight by the aircrew? - -Unscheduled maintenance What is the best way to fix an aircraft problem? - -Preventative maintenance. Fix it before it becomes a problem. What do you call the deterioration of metal that's caused when it reacts to its environment attempting to return to its natural state? - -Corrosion To prevent corrosion, what type of rivets, bolts, and nuts should you use? - -Use the same as the same material of the structure. What is your responsibility if you find corrosion on an aircraft not within your expertise to repair? - -Write up the condition in the aircraft forms and notify the crew chief or a supervisor. Which TO series will have the inspection requirements for the F-15E Aircraft? - --6, in the 1F-15E-6 Are work cards assigned a TO number and if so, why? - -Yes. Technically work cards are a type of TO and therefore must be assigned a TO number. What are the two primary aids to effective inspection scheduling? - -Inspection work cards and sequence charts. List the 5 basic types of inspections: - --Periodic -Phased -Calendar -Isochronal -Programmed depot maintenance Describe the periodic and phased basic inspection concepts. - -They are inspections divided up into smaller inspections covered into different groups. They all add up to the total amount of inspections needed. Why was the phased inspection concept developed? - -The phase inspection has the aircraft out of commission for less time. Name the 6 basic sub-elements of the periodic inspection: - -1. Preflight 2. EOR (end of runway) 3. Thruflight 4. Basic Postflight 5. Hourly Postflight 6. Periodic What are the 5 sub-elements of the phase inspection? - -1. Preflight CDC CDC 2. EOR (end of runway) 3. Thruflight 4. Basic Postflight 5. Phase When is a 90 day calendar inspection required? - -When the aircraft hasn't flown or is out of commission for more than 90 calendar days. What inspection is based on a calendar day sequence rather than the flying or operating hour sequence? - -Isochronal Inspection What are the objectives of ASIP? - -Establish, evaluate, and substantiate the structural integrity of the aircraft structure. What does ASIP provide? - -Quantitative information for decisions on force structure, planning, inspection, and modification priorities and related operational and support decisions. Why do we assign AF personnel responsibility for property? - -So it can be safeguarded. Why is it important to understand responsibility for government property? - -Because if you are negligent you might have to pay for some if not all the damages. What is accountability? Give an example. - -"An accountable person is someone, who, by law, lawful order, instructions, or contract, maintains accurate records of property or documents in his charge." Ex: A custodian in charge of supply. Explain the difference between accountability and responsibility. - -Accountability is when you have the items you are in charge of. Responsibility is when you aren't accountable for the items, but held liable for them. What must be done if an item worth over $100 is lost or damaged? - -A report of survey is required. Explain the Report of Survey process: - --Individual is issued a ROS. -Investigation is conducted. -If investigation proves willful misconduct, statement of charges is initiated. What is the purpose of RAMPOD? - -RAMPOD collects, reports, and maintains realtime inventory, performance and data for the pods. What AF assets are inventoried and financially accounted for in RAMPOD? - -AF pods and leased pods. What form is used to order parts from supply? - -AF Form 2005 CDC CDC What is the purpose of the forward supply point? - -To be located within the maintenance unit so assets are immediately available to the using activity. What are the 3 stock items found in the work center and give examples of each? - - Bench: Nuts, bolts, washers, etc. -Shop: Gas cylinders, sheet metal, plastic, fabric, etc, -Operating: Connectors, dust covers, hydraulic line caps, etc. Explain the process of the repair cycle: - -Supplying needed parts to the flight line and getting defective parts repaired. What is a scarce item in the supply system referred to as? - -Critical Item What happens when there is a needed part and there is no replacement part in supply? Who authorizes this action? - -Cannibalization. The pro-super or maintenance officer. Describe a DD Form 1574/1574-1. - -1