TTT1 || Errorless Answers 100%.
What are the three main components that make up a fall arrest system? correct answers
Anchorage, Full body harness, and Attachments
Who is responsible for ensuring the General Duty Clause when OSHA has not yet publicized the
specific regulations? correct answers Employer
When should safety glasses be worn? correct answers When grinding steel
Monopole components are identified as: correct answers Base Flange
The following term is used to describe rules written by the Department of Labor: correct answers
Regulations
Which government organization regulates tower lighting? correct answers FAA
What does the person operating the Capstan need a clear view of? correct answers The load and
signal person
T/F: You should use a carabiner when lifting loads? correct answers False
The four most common types of structures used to support antennas are: correct answers Self-
Supporting, Monopoles, Guyed, and Non-Standard
T/F: All antennas should be considered active? correct answers True
The following piece of equipment can be used to power an electric Capstan when an electrical
outlet is not available: correct answers Generator
, What is the heel block used for? correct answers To change the direction of the load, jump or tag
line from horizontal to vertical
The vehicle mounted capstan should be moved as close as possible to the __________ once the
lifting path is determined. correct answers Lifting staging area
T/F: A safe practice is to stay 6 feet or more away from an active antenna correct answers True
What is the most common power source used with a Capstan Hoist? correct answers Electrical
power
When using an extension ladder, how many feet past the platform must the ladder extend?
correct answers 3 feet
A Capstan hoist should be inspected __________ before use? correct answers Daily
A vertical life line should have a minimum breaking strength of how many pounds? correct
answers 5,000 lbs
What do the letters LOTO stand for? correct answers Lockout Tagout
T/F: Due to the resonance frequency and the high power of broadcast antennas, overexposure is
almost always a problem. correct answers True
T/F: An RF monitor should be worn in areas of unknown RF exposure. correct answers True
The minimum force that a work positioning system anchorage must be able to withstand is:
correct answers 2 time the arresting force of 3,000 lbs.
What are the three main components that make up a fall arrest system? correct answers
Anchorage, Full body harness, and Attachments
Who is responsible for ensuring the General Duty Clause when OSHA has not yet publicized the
specific regulations? correct answers Employer
When should safety glasses be worn? correct answers When grinding steel
Monopole components are identified as: correct answers Base Flange
The following term is used to describe rules written by the Department of Labor: correct answers
Regulations
Which government organization regulates tower lighting? correct answers FAA
What does the person operating the Capstan need a clear view of? correct answers The load and
signal person
T/F: You should use a carabiner when lifting loads? correct answers False
The four most common types of structures used to support antennas are: correct answers Self-
Supporting, Monopoles, Guyed, and Non-Standard
T/F: All antennas should be considered active? correct answers True
The following piece of equipment can be used to power an electric Capstan when an electrical
outlet is not available: correct answers Generator
, What is the heel block used for? correct answers To change the direction of the load, jump or tag
line from horizontal to vertical
The vehicle mounted capstan should be moved as close as possible to the __________ once the
lifting path is determined. correct answers Lifting staging area
T/F: A safe practice is to stay 6 feet or more away from an active antenna correct answers True
What is the most common power source used with a Capstan Hoist? correct answers Electrical
power
When using an extension ladder, how many feet past the platform must the ladder extend?
correct answers 3 feet
A Capstan hoist should be inspected __________ before use? correct answers Daily
A vertical life line should have a minimum breaking strength of how many pounds? correct
answers 5,000 lbs
What do the letters LOTO stand for? correct answers Lockout Tagout
T/F: Due to the resonance frequency and the high power of broadcast antennas, overexposure is
almost always a problem. correct answers True
T/F: An RF monitor should be worn in areas of unknown RF exposure. correct answers True
The minimum force that a work positioning system anchorage must be able to withstand is:
correct answers 2 time the arresting force of 3,000 lbs.
