BICSI Practice Test-RETAKE latest updated questions and
answers
The 2 main considerations concerning the existing cabling are? - answer Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another until completed
is called a - answer rolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section of
the retrofit is completed and then moving them back to their recabled office space? - answer
Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of
light? - answer Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out? - answer CLR
11-27
A ______ uses several pluggable modules to locate and Identify cables. - answer Office locator
kit
A _________ injects light (at a proper wavelength) and measures the results t the other end. -
answer Light source and power meter
A ________ detects the presence of light within a fiber strand - answer Fiber strand identifier
, A _______ uses a laser to identify fiber strands and find breaks in the fiber at the near end. -
answer Visual fault locator
A________ will leave the customer momentarily without communications - answer Hot-cut 11-
28
During a _______, cross-connects are relocated one pair after another until completed. - answer
Rolling cut
*_________ is a property of an electromagnetic field built around a conductor that opposes any
changes in current flow in a circuit. - answer Inductance
____________ is a property of conductors that allows storage of electrical charges when
potential differences (voltages) exist between the conductors. - answer Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is measured in
ohms. - answer Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______ ohms at 100
MHz - answer 100
Pair 626 would be in the __________ Super Binder - answer Red
Series ______ is the preferred choice for longer runs - answer 11
The _________ connector/s have center pins (choose all that apply) - answer N
BNC
answers
The 2 main considerations concerning the existing cabling are? - answer Grandfathered system
Abandoned cable 11-25
The type of cutover where cross-connects are relocated one pair after another until completed
is called a - answer rolling cut 11-28
Which practice involves moving the customer to a temporary office space until their section of
the retrofit is completed and then moving them back to their recabled office space? - answer
Swing space phasing
Which of these testers would you clamp around a strand of fiber to check for the presence of
light? - answer Fiber strand identifier 11-11
A ______ provides a quick graphical representation of how the circuit is layed out? - answer CLR
11-27
A ______ uses several pluggable modules to locate and Identify cables. - answer Office locator
kit
A _________ injects light (at a proper wavelength) and measures the results t the other end. -
answer Light source and power meter
A ________ detects the presence of light within a fiber strand - answer Fiber strand identifier
, A _______ uses a laser to identify fiber strands and find breaks in the fiber at the near end. -
answer Visual fault locator
A________ will leave the customer momentarily without communications - answer Hot-cut 11-
28
During a _______, cross-connects are relocated one pair after another until completed. - answer
Rolling cut
*_________ is a property of an electromagnetic field built around a conductor that opposes any
changes in current flow in a circuit. - answer Inductance
____________ is a property of conductors that allows storage of electrical charges when
potential differences (voltages) exist between the conductors. - answer Capacitance
*In AC circuits, the total opposition to current flow is called _________, which is measured in
ohms. - answer Impedance
The nominal characteristic impedance of balanced twisted pair cable is _______ ohms at 100
MHz - answer 100
Pair 626 would be in the __________ Super Binder - answer Red
Series ______ is the preferred choice for longer runs - answer 11
The _________ connector/s have center pins (choose all that apply) - answer N
BNC
