ITN 101 MODULE 2 TEST QUESTIONS WITH COMPLETE
SOLUTUONS
1) As a network engineer, you have been sent to install a data outlet at BMC
Corporation Ltd. Which of the following cable installation tips should you follow to
prevent physical layer failures and to reduce the risk of damage from pests and
water? -- Answer ✔✔ Install cable through conduits.
2) Which of the following consists of one or more insulated twisted-pair wires encased
in a plastic sheath? -- Answer ✔✔ UTP
3) Which of the following cables comes coated with a flame-resistant jacket? -- Answer
✔✔ Plenum cable
4) Which of the following cabling methods connects workstations to the closest data
rooms? -- Answer ✔✔ Horizontal cabling
5) Which of the following is a component of backbone cabling that runs between
building floors? -- Answer ✔✔ Vertical cross connect
6) You are a network technician who, on inspection, has found that one of the cables is
faulty as a result of which you now have to insert a new piece of twisted pair into
, the data receptors to complete the circuit. Which of the following will you apply to
sort this issue? -- Answer ✔✔ Punchdown tool
7) You are a junior technician at KVM Solutions. They have just received a query from a
university who wants their network connection to be set up. You have been tasked
with sketching a diagram for the various network devices that will be used to
establish the connection. Which of the following options would you apply to identify
the routers in that connection? -- Answer ✔✔ A hockey-puck shape with two
arrows pointing inward and two arrows pointing outward
8) A client who has a small office setup has complained about a faulty wired connection
in their LAN as a result of which they are unable to use the broadband service to
access the Internet. You, as a network technician, have to solve the matter. Which
of the following will you need to access the situation? -- Answer ✔✔ A wiring
diagram
9) Sphinx Infra Ltd. has doubts on how to meet the various privacy, security, and safety
precautions installed for their network. You have been hired to analyze the existing
modules for which you will need to go through the network documentation before
suggesting any change. Which segment in the network document will contain the
necessary information you require? -- Answer ✔✔ Special instructions
10) What is a graphical representation of network devices and connections known as? --
Answer ✔✔ A network diagram
11) The process of designing, implementing, and maintaining an entire network is called
_____. -- Answer ✔✔ a system life cycle
SOLUTUONS
1) As a network engineer, you have been sent to install a data outlet at BMC
Corporation Ltd. Which of the following cable installation tips should you follow to
prevent physical layer failures and to reduce the risk of damage from pests and
water? -- Answer ✔✔ Install cable through conduits.
2) Which of the following consists of one or more insulated twisted-pair wires encased
in a plastic sheath? -- Answer ✔✔ UTP
3) Which of the following cables comes coated with a flame-resistant jacket? -- Answer
✔✔ Plenum cable
4) Which of the following cabling methods connects workstations to the closest data
rooms? -- Answer ✔✔ Horizontal cabling
5) Which of the following is a component of backbone cabling that runs between
building floors? -- Answer ✔✔ Vertical cross connect
6) You are a network technician who, on inspection, has found that one of the cables is
faulty as a result of which you now have to insert a new piece of twisted pair into
, the data receptors to complete the circuit. Which of the following will you apply to
sort this issue? -- Answer ✔✔ Punchdown tool
7) You are a junior technician at KVM Solutions. They have just received a query from a
university who wants their network connection to be set up. You have been tasked
with sketching a diagram for the various network devices that will be used to
establish the connection. Which of the following options would you apply to identify
the routers in that connection? -- Answer ✔✔ A hockey-puck shape with two
arrows pointing inward and two arrows pointing outward
8) A client who has a small office setup has complained about a faulty wired connection
in their LAN as a result of which they are unable to use the broadband service to
access the Internet. You, as a network technician, have to solve the matter. Which
of the following will you need to access the situation? -- Answer ✔✔ A wiring
diagram
9) Sphinx Infra Ltd. has doubts on how to meet the various privacy, security, and safety
precautions installed for their network. You have been hired to analyze the existing
modules for which you will need to go through the network documentation before
suggesting any change. Which segment in the network document will contain the
necessary information you require? -- Answer ✔✔ Special instructions
10) What is a graphical representation of network devices and connections known as? --
Answer ✔✔ A network diagram
11) The process of designing, implementing, and maintaining an entire network is called
_____. -- Answer ✔✔ a system life cycle
