OSHA 511 General Industry Exam Newest 2025 featuring
accurate and verified questions covering OSHA standards,
workplace safety regulations, hazard recognition,
recordkeeping, industrial hygiene, and employer
responsibilities. Designed for profess
What is a result of workplace injuries and illnesses? - ans -Lower morale and
increased costs
What is OSHA's mission? - ans -Protect safety and health of workers
What is 11(c) of the OSHA Act? - ans -Whistleblower protection
What is the difference between a horizontal and vertical standard? - ans -
Horizontal standards generally apply to all industries----vertical standards apply to
specific industries---- if a condition is not covered under a vertical standard, it may
revert back to the horizontal standard.
What is a CPL, STD or other Directive? - ans -Documents to clarify OSHA standards
and hopefully ensure consistent enforcement of the standards.
What is OSHA'S multi-employer policy? - ans -On sites where more than one
employer is working, this policy address possible citations to employers who
expose their employees to a hazard; create a hazard; have control of a hazard; or
have the ability to correct a hazard.
What is "abatement"... must the employer abate citations? - ans -Employer must
abate (correct) all finalized citations.
What are the four parts to an OSHA inspection? - ans -Present credentials,
opening conference, walk-around, and closing conference.
For the 300 Log, if a worker could only work a partial day... what type of case is
that? - ans -Restricted
, What is an incidence rate? - ans -The number of recordable injuries and illnesses
per 100 full-time workers.
What are good examples of management leadership? - ans -Lead by example;
know and follow the rules; and provide resources for safety.
What is a proactive approach of identifying and correcting hazards in a
workplace? - ans -Regular reviews of company policies and procedures to make
improvements.
What is a floor hole? - ans -A gap or opening measuring 2 inches or more.
As a general rule, fall protection must be provided at ______ feet or more... in
general industry workplaces? - ans -4 feet
When is a ladder safety system required on a fixed ladder? - ans -Fixed ladders
requiring a climb of > 24 feet.
In planning for emergency exits... what is an important consideration ? - ans -The
specific number of personnel... provide an adequate number of exit routes.
When can an employer orally communicate the Emergency Action Plan? - ans -
When they have 10 or fewer employees.
For Class A Fires, extinguishers must be located within ____ feet of the employee?
- ans -75 Feet
What determine different categories of flammable liquids? - ans -Flashpoint and
boiling point
What are the three basic means of safeguarding machinery? - ans -Devices,
guards, and location.
In machine guarding, what is meant by "point of operation? - ans -Point where
cutting, shaping, boring, or forming is accomplished.
accurate and verified questions covering OSHA standards,
workplace safety regulations, hazard recognition,
recordkeeping, industrial hygiene, and employer
responsibilities. Designed for profess
What is a result of workplace injuries and illnesses? - ans -Lower morale and
increased costs
What is OSHA's mission? - ans -Protect safety and health of workers
What is 11(c) of the OSHA Act? - ans -Whistleblower protection
What is the difference between a horizontal and vertical standard? - ans -
Horizontal standards generally apply to all industries----vertical standards apply to
specific industries---- if a condition is not covered under a vertical standard, it may
revert back to the horizontal standard.
What is a CPL, STD or other Directive? - ans -Documents to clarify OSHA standards
and hopefully ensure consistent enforcement of the standards.
What is OSHA'S multi-employer policy? - ans -On sites where more than one
employer is working, this policy address possible citations to employers who
expose their employees to a hazard; create a hazard; have control of a hazard; or
have the ability to correct a hazard.
What is "abatement"... must the employer abate citations? - ans -Employer must
abate (correct) all finalized citations.
What are the four parts to an OSHA inspection? - ans -Present credentials,
opening conference, walk-around, and closing conference.
For the 300 Log, if a worker could only work a partial day... what type of case is
that? - ans -Restricted
, What is an incidence rate? - ans -The number of recordable injuries and illnesses
per 100 full-time workers.
What are good examples of management leadership? - ans -Lead by example;
know and follow the rules; and provide resources for safety.
What is a proactive approach of identifying and correcting hazards in a
workplace? - ans -Regular reviews of company policies and procedures to make
improvements.
What is a floor hole? - ans -A gap or opening measuring 2 inches or more.
As a general rule, fall protection must be provided at ______ feet or more... in
general industry workplaces? - ans -4 feet
When is a ladder safety system required on a fixed ladder? - ans -Fixed ladders
requiring a climb of > 24 feet.
In planning for emergency exits... what is an important consideration ? - ans -The
specific number of personnel... provide an adequate number of exit routes.
When can an employer orally communicate the Emergency Action Plan? - ans -
When they have 10 or fewer employees.
For Class A Fires, extinguishers must be located within ____ feet of the employee?
- ans -75 Feet
What determine different categories of flammable liquids? - ans -Flashpoint and
boiling point
What are the three basic means of safeguarding machinery? - ans -Devices,
guards, and location.
In machine guarding, what is meant by "point of operation? - ans -Point where
cutting, shaping, boring, or forming is accomplished.
