MATE 210 - QUIZZES QUESTIONS AND ANSWERS
What is an example of an electron configuration for an inert gas? - Answers :1s^2 2s^2
2p^6 3s^2 3p^6 - it fills 3s and 3p subshells
What type of bonding would be expected for bronze (a copper-tin alloy)? - Answers
:Metallic bonding - it's a metal alloy
What type of bonding would be expected for rubber? - Answers :Covalent bonding with
some van der Waals bonding - rubber is composed primarily of carbon and hydrogen
atoms
In the following unit cell, which vector represents the [121] direction? - Answers :starts
at origin (here our steps to figure it out) - divide the coordinates by 2, move 1/2 units
along x axis, move 1 unit along y axis, move 1/2 units along z axis
What does the cubic unit cell look like for indices (102)? - Answers :idk (don't have
enough money for Quizlet premium to upload picture here)
What is true about grain boundaries? - Answers :- this area is more chemically reactive
- this area has a low density
- it is the transition from the lattice of one region to that of the other
- it is the region between crystals
Calculate the diffusion coefficient for copper in aluminum at 600C. Pre exponential and
activation energy values for this system are 6.5 x 10^-5 m^2/s and 136,000 J/mol. -
Answers :4.7 x 10^-13 m^2/s
Atoms of which of the following elements will diffuse most rapidly in iron? C, Cr, Mo, or
W - Answers :C - carbon atoms diffuse most rapidly because they are smaller than
atoms of Mo,Cr,W. Diffusion of C in Fe is via an interstitial mechanism, whereas for
Mo,Cr,W the mechanism is vacancy diffusion
A cylindrical specimen of a nickel alloy having an elastic modulus of 207 GPa (30 × 106
psi) and an original diameter of 10.2 mm (0.40 in.) experiences only elastic deformation
when a tensile load of 8900 N (2000 lbf) is applied. Compute the maximum length of the
specimen before deformation if the maximum allowable elongation is 0.25 mm (0.010
in.) - Answers :0.475 m - calculate before deformation that is deformed elastically in
tension
What is the modulus of elasticity? - Answers :stress/strain or slope of elastic part in
stress-strain graph
What is the proportional limit? - Answers :the stress level where the linearity of the
stress-strain graph ends (where it starts to curve)(where plastic deformation starts)
, What is the yield strength at a strain offset of 0.002? (How to compute it) - Answers :use
slope of graph (modulus of elasticity), start at 0.002 on strain then move along the slope
till you hit the curve on the graph to find stress
What is the tensile strength? - Answers :the maximum stress on the curve
6.1 FE A steel rod is pulled in tension with a stress that is less than the yield strength.
The modulus of elasticity may be calculated as: - Answers :Axial stress divided by axial
strain
6.2FE A cylindrical specimen of brass that has a diameter of 20 mm, a tensile modulus
of 110 GPa, and a Poisson's ratio of 0.35 is pulled in tension with force of 40,000 N. If
the deformation is totally elastic, what is the strain experienced by the specimen? -
Answers :0.00116
A dislocation formed by adding an extra half-plan of atoms to a crystal is referred to as
a/an: - Answers :edge dislocation - a dislocation formed by adding an extra half plane of
atoms to a crystal
What does the cubic unit cell look like for indices (111^-) plane - Answers :idk but the
bar at top of the third number means it is negative
What does the cubic unit cell look like for direction [112]? - Answers :starts at cubic
corner that's on the y-axis
What are three types of point defects found in crystals? How can they be used to
strengthen the material? - Answers :3 types are - vacancy atoms, interstitial atoms,
substitutional. Material strengthens because you are adding an atom into the group of
atom keeping the whole structure a bit more compact
Describe the conditions favorable for substitutional solid solutions (S.S) i.e. the W.
Hume - Rothery rule - Answers :1) atomic size factor - difference in atomic radii must be
less than +/- 15%. Otherwise, the solute atoms will create substantial lattice distortions
that a new phase will form 2) crystal structures - same atom types 3) electronegativity -
similar electronegativities4) valences - want higher valency
Plastically deforming a metal specimen near room temperature generally leads to what
property changes? - Answers :an increased tensile strength and a decreased ductility -
plastically deforming a metal increases the dislocation density
Briefly explain why small-angle grain boundaries are not as effective in interfering with
the slip process as are high-angle grain boundaries. - Answers :a small angle grain
boundaries do not have as much crystallographic misalignment in the grain boundary
region for small-angle, and therefore not as much change in slip direction
What is an example of an electron configuration for an inert gas? - Answers :1s^2 2s^2
2p^6 3s^2 3p^6 - it fills 3s and 3p subshells
What type of bonding would be expected for bronze (a copper-tin alloy)? - Answers
:Metallic bonding - it's a metal alloy
What type of bonding would be expected for rubber? - Answers :Covalent bonding with
some van der Waals bonding - rubber is composed primarily of carbon and hydrogen
atoms
In the following unit cell, which vector represents the [121] direction? - Answers :starts
at origin (here our steps to figure it out) - divide the coordinates by 2, move 1/2 units
along x axis, move 1 unit along y axis, move 1/2 units along z axis
What does the cubic unit cell look like for indices (102)? - Answers :idk (don't have
enough money for Quizlet premium to upload picture here)
What is true about grain boundaries? - Answers :- this area is more chemically reactive
- this area has a low density
- it is the transition from the lattice of one region to that of the other
- it is the region between crystals
Calculate the diffusion coefficient for copper in aluminum at 600C. Pre exponential and
activation energy values for this system are 6.5 x 10^-5 m^2/s and 136,000 J/mol. -
Answers :4.7 x 10^-13 m^2/s
Atoms of which of the following elements will diffuse most rapidly in iron? C, Cr, Mo, or
W - Answers :C - carbon atoms diffuse most rapidly because they are smaller than
atoms of Mo,Cr,W. Diffusion of C in Fe is via an interstitial mechanism, whereas for
Mo,Cr,W the mechanism is vacancy diffusion
A cylindrical specimen of a nickel alloy having an elastic modulus of 207 GPa (30 × 106
psi) and an original diameter of 10.2 mm (0.40 in.) experiences only elastic deformation
when a tensile load of 8900 N (2000 lbf) is applied. Compute the maximum length of the
specimen before deformation if the maximum allowable elongation is 0.25 mm (0.010
in.) - Answers :0.475 m - calculate before deformation that is deformed elastically in
tension
What is the modulus of elasticity? - Answers :stress/strain or slope of elastic part in
stress-strain graph
What is the proportional limit? - Answers :the stress level where the linearity of the
stress-strain graph ends (where it starts to curve)(where plastic deformation starts)
, What is the yield strength at a strain offset of 0.002? (How to compute it) - Answers :use
slope of graph (modulus of elasticity), start at 0.002 on strain then move along the slope
till you hit the curve on the graph to find stress
What is the tensile strength? - Answers :the maximum stress on the curve
6.1 FE A steel rod is pulled in tension with a stress that is less than the yield strength.
The modulus of elasticity may be calculated as: - Answers :Axial stress divided by axial
strain
6.2FE A cylindrical specimen of brass that has a diameter of 20 mm, a tensile modulus
of 110 GPa, and a Poisson's ratio of 0.35 is pulled in tension with force of 40,000 N. If
the deformation is totally elastic, what is the strain experienced by the specimen? -
Answers :0.00116
A dislocation formed by adding an extra half-plan of atoms to a crystal is referred to as
a/an: - Answers :edge dislocation - a dislocation formed by adding an extra half plane of
atoms to a crystal
What does the cubic unit cell look like for indices (111^-) plane - Answers :idk but the
bar at top of the third number means it is negative
What does the cubic unit cell look like for direction [112]? - Answers :starts at cubic
corner that's on the y-axis
What are three types of point defects found in crystals? How can they be used to
strengthen the material? - Answers :3 types are - vacancy atoms, interstitial atoms,
substitutional. Material strengthens because you are adding an atom into the group of
atom keeping the whole structure a bit more compact
Describe the conditions favorable for substitutional solid solutions (S.S) i.e. the W.
Hume - Rothery rule - Answers :1) atomic size factor - difference in atomic radii must be
less than +/- 15%. Otherwise, the solute atoms will create substantial lattice distortions
that a new phase will form 2) crystal structures - same atom types 3) electronegativity -
similar electronegativities4) valences - want higher valency
Plastically deforming a metal specimen near room temperature generally leads to what
property changes? - Answers :an increased tensile strength and a decreased ductility -
plastically deforming a metal increases the dislocation density
Briefly explain why small-angle grain boundaries are not as effective in interfering with
the slip process as are high-angle grain boundaries. - Answers :a small angle grain
boundaries do not have as much crystallographic misalignment in the grain boundary
region for small-angle, and therefore not as much change in slip direction