VA Pesticide Exam Questions and
Answers Latest Version Already Passed
What is the main reason for reading the pesticide label before use?
✔✔The label provides essential information on proper application, safety precautions, and legal
requirements.
How should you dispose of unused pesticide product?
✔✔Follow the label instructions and take unused product to an approved hazardous waste
disposal site.
What is the signal word "Danger" on a pesticide label used to indicate?
✔✔It indicates that the pesticide is highly toxic and may cause severe harm to humans or
animals.
What should you do immediately after a pesticide spill?
✔✔Contain the spill, wear protective equipment, and clean it up according to the product’s label
instructions.
1
,Why is it important to calibrate your pesticide application equipment?
✔✔Proper calibration ensures the correct amount of pesticide is applied, preventing overuse or
underuse.
What is drift in pesticide application?
✔✔Drift is the movement of pesticide away from the target area due to wind or air movement
during or after application.
What type of PPE is commonly required when mixing concentrated pesticides?
✔✔Chemical-resistant gloves, goggles, long sleeves, and sometimes a respirator are required for
safe mixing.
How can you reduce the risk of pesticide exposure during application?
✔✔Wear the recommended personal protective equipment and follow all label directions
closely.
Why must pesticide containers be triple-rinsed before disposal?
✔✔Triple-rinsing ensures that no hazardous residue remains, making the container safe for
recycling or disposal.
2
,What is the restricted entry interval (REI) on a pesticide label?
✔✔The REI is the minimum amount of time that must pass after pesticide application before
people can re-enter the treated area without protective gear.
Why should pesticides not be stored near animal feed?
✔✔Pesticides can contaminate feed, causing harm or death to animals if ingested.
What should you do if pesticide gets into your eyes?
✔✔Rinse the eyes with clean water for at least 15 minutes and seek medical attention
immediately.
How can you identify if a pesticide is restricted use?
✔✔The label will clearly state “Restricted Use Pesticide” at the top, indicating special training
and certification are required.
Why should pesticide equipment be cleaned after each use?
✔✔Cleaning removes residue, prevents cross-contamination, and keeps the equipment in proper
working condition.
3
, How often should you inspect your pesticide application equipment?
✔✔Inspect equipment before each use to ensure it is clean, properly calibrated, and in good
working order.
Why is it important to keep records of pesticide applications?
✔✔Records help ensure compliance with laws, assist in diagnosing pest issues, and provide
proof of responsible use.
What is an active ingredient in a pesticide product?
✔✔The active ingredient is the chemical that controls the pest and is listed by name and
percentage on the label.
How does temperature affect pesticide application?
✔✔High temperatures can increase evaporation and drift, while low temperatures may reduce
effectiveness.
Why is it dangerous to mix pesticides unless the label allows it?
4
Answers Latest Version Already Passed
What is the main reason for reading the pesticide label before use?
✔✔The label provides essential information on proper application, safety precautions, and legal
requirements.
How should you dispose of unused pesticide product?
✔✔Follow the label instructions and take unused product to an approved hazardous waste
disposal site.
What is the signal word "Danger" on a pesticide label used to indicate?
✔✔It indicates that the pesticide is highly toxic and may cause severe harm to humans or
animals.
What should you do immediately after a pesticide spill?
✔✔Contain the spill, wear protective equipment, and clean it up according to the product’s label
instructions.
1
,Why is it important to calibrate your pesticide application equipment?
✔✔Proper calibration ensures the correct amount of pesticide is applied, preventing overuse or
underuse.
What is drift in pesticide application?
✔✔Drift is the movement of pesticide away from the target area due to wind or air movement
during or after application.
What type of PPE is commonly required when mixing concentrated pesticides?
✔✔Chemical-resistant gloves, goggles, long sleeves, and sometimes a respirator are required for
safe mixing.
How can you reduce the risk of pesticide exposure during application?
✔✔Wear the recommended personal protective equipment and follow all label directions
closely.
Why must pesticide containers be triple-rinsed before disposal?
✔✔Triple-rinsing ensures that no hazardous residue remains, making the container safe for
recycling or disposal.
2
,What is the restricted entry interval (REI) on a pesticide label?
✔✔The REI is the minimum amount of time that must pass after pesticide application before
people can re-enter the treated area without protective gear.
Why should pesticides not be stored near animal feed?
✔✔Pesticides can contaminate feed, causing harm or death to animals if ingested.
What should you do if pesticide gets into your eyes?
✔✔Rinse the eyes with clean water for at least 15 minutes and seek medical attention
immediately.
How can you identify if a pesticide is restricted use?
✔✔The label will clearly state “Restricted Use Pesticide” at the top, indicating special training
and certification are required.
Why should pesticide equipment be cleaned after each use?
✔✔Cleaning removes residue, prevents cross-contamination, and keeps the equipment in proper
working condition.
3
, How often should you inspect your pesticide application equipment?
✔✔Inspect equipment before each use to ensure it is clean, properly calibrated, and in good
working order.
Why is it important to keep records of pesticide applications?
✔✔Records help ensure compliance with laws, assist in diagnosing pest issues, and provide
proof of responsible use.
What is an active ingredient in a pesticide product?
✔✔The active ingredient is the chemical that controls the pest and is listed by name and
percentage on the label.
How does temperature affect pesticide application?
✔✔High temperatures can increase evaporation and drift, while low temperatures may reduce
effectiveness.
Why is it dangerous to mix pesticides unless the label allows it?
4
