MTA CERTIFICATION EXAM STUDY GUIDE
WITH COMPLETE SOLUTION!!
How does a standard hub differ from a standard switch?
A hub sends packets to all connected computers; a switch directs a packet to a
specific computer.
Which type of network uses CSMA/CD as the access method?
Ethernet
Which of the following is a valid private address that supports communication
throughout a subnetted network?
192.168.44.105
What is the role of routing protocols?
To dynamically update route information.
You have a routed network with a single DHCP server. There are no DHCP Relay
agents on the network. All clients are configured for dynamic addressing.
What do you need to enable on the router
BOOTP forwarding
Which kind of device is used to connect a wireless LAN segment?
, Wireless access point (WAP)
A set of interconnected local area netowrks (LANs) is known as a:
Wide area network (WAN)
Which method does a DHCP client use to locate a DHCP server?
Broadcast
An infrastructure mode WLAN
Can be used to connect wireless clients to a wired network.
Your network is configured to allow selected business partners access to resources
on your internal network through virtual private network (VPN) connection. This
is an example of an
extranet
A firewall separates a management workstation from a router.
You ned to manage the router using telnet with out specifying a port.
Which traffic must the firewall allow?
Traffic on port 23
ADSL
WITH COMPLETE SOLUTION!!
How does a standard hub differ from a standard switch?
A hub sends packets to all connected computers; a switch directs a packet to a
specific computer.
Which type of network uses CSMA/CD as the access method?
Ethernet
Which of the following is a valid private address that supports communication
throughout a subnetted network?
192.168.44.105
What is the role of routing protocols?
To dynamically update route information.
You have a routed network with a single DHCP server. There are no DHCP Relay
agents on the network. All clients are configured for dynamic addressing.
What do you need to enable on the router
BOOTP forwarding
Which kind of device is used to connect a wireless LAN segment?
, Wireless access point (WAP)
A set of interconnected local area netowrks (LANs) is known as a:
Wide area network (WAN)
Which method does a DHCP client use to locate a DHCP server?
Broadcast
An infrastructure mode WLAN
Can be used to connect wireless clients to a wired network.
Your network is configured to allow selected business partners access to resources
on your internal network through virtual private network (VPN) connection. This
is an example of an
extranet
A firewall separates a management workstation from a router.
You ned to manage the router using telnet with out specifying a port.
Which traffic must the firewall allow?
Traffic on port 23
ADSL
