CONTRACTORS LICENSE REVISION -
QUESTIONS WITH 100% VERIFIED
ANSWERS
pine wood is one of the - ✔✔softest woods
small cuts and abrasions must be treated - ✔✔immediatly
full roles of sheet goods should be transported from one work area to another on a -
✔✔four wheel hand truck
a worker should never ride a - ✔✔construction material elevator
the floor covering trade (c-15) is considered the less - ✔✔hazardous
when a worker notices something dangerous they should - ✔✔report it immediately
workers should not touch what when standing in water - ✔✔live wires
when using extension cords you should not cut ---- in a 3 prong plugs, instead use an adapter -
✔✔off the ground prong
when lifting what is the correct method - ✔✔keep your back straight and lift with your
thighs and leg muscles
, when nailing keep your head squarely, keeping your head up and above the floor in order
to prevent - ✔✔particles from hitting your face and eyes
trowels used to apply adhesive must be the size notches or teeth recommended by -
✔✔the carpet or adhesive manufacturer
when using knives always stand to - ✔✔one side and cut away from body
keep the teeth of the knee kicker and the power stretcher pointed - ✔✔downward on
the carpet during all usage
in sanding a non warped wood floor the sanding machine should be run with the -
✔✔grain of the wood
do not try to carry more than - ✔✔2/3 of your body weight
always make use of the equipment at the job site if some equipment is not available always
- ✔✔call shop for help
used for the invisible tracking of carpet on wood floors at flush doorways -
✔✔anchorite tool/pins
a sharp pointed tool similar to an ice pick used to make holes or pick up carpet - ✔✔awl
loom which is highly specialized and versatile in weaving color combinations and designs
into carpet. the loom produces single level but pile textures - ✔✔axminister loom
straight edge used to cut through the back of cut pile carpeting - ✔✔back cutter
QUESTIONS WITH 100% VERIFIED
ANSWERS
pine wood is one of the - ✔✔softest woods
small cuts and abrasions must be treated - ✔✔immediatly
full roles of sheet goods should be transported from one work area to another on a -
✔✔four wheel hand truck
a worker should never ride a - ✔✔construction material elevator
the floor covering trade (c-15) is considered the less - ✔✔hazardous
when a worker notices something dangerous they should - ✔✔report it immediately
workers should not touch what when standing in water - ✔✔live wires
when using extension cords you should not cut ---- in a 3 prong plugs, instead use an adapter -
✔✔off the ground prong
when lifting what is the correct method - ✔✔keep your back straight and lift with your
thighs and leg muscles
, when nailing keep your head squarely, keeping your head up and above the floor in order
to prevent - ✔✔particles from hitting your face and eyes
trowels used to apply adhesive must be the size notches or teeth recommended by -
✔✔the carpet or adhesive manufacturer
when using knives always stand to - ✔✔one side and cut away from body
keep the teeth of the knee kicker and the power stretcher pointed - ✔✔downward on
the carpet during all usage
in sanding a non warped wood floor the sanding machine should be run with the -
✔✔grain of the wood
do not try to carry more than - ✔✔2/3 of your body weight
always make use of the equipment at the job site if some equipment is not available always
- ✔✔call shop for help
used for the invisible tracking of carpet on wood floors at flush doorways -
✔✔anchorite tool/pins
a sharp pointed tool similar to an ice pick used to make holes or pick up carpet - ✔✔awl
loom which is highly specialized and versatile in weaving color combinations and designs
into carpet. the loom produces single level but pile textures - ✔✔axminister loom
straight edge used to cut through the back of cut pile carpeting - ✔✔back cutter
