Defense Basic Preservation and Packing
(CERT) Exam
You have received items you've never packaged before. Where do you find their
preservation and packaging requirements? - ANS-FLIS database
The FLIS packaging requirements show the item you are packaging has the 4-digit
category code of "ZZ Z Z". This code means the item - ANS-is selective or has special
instructions
An item requires immediate, heat-based drying. Using the approved drying process, you
can either put the item under an infrared lamp or - ANS-Put it in a heated-air oven
When deciding what cleaning process to use, which characteristics of the item do you
need to consider? - ANS-Composition, complexity, and surface finish
Which type of preservative releases vapors that form an invisible protective film around
an item to protect it from corrosion? - ANS-Volatile Corrosion Inhibitors (VCI)
Where would you go to find out which preservative material this item requires? - ANS-
MIL-STD-2073-1 Table J-III
Which type of heat sealer should NOT be used on thin plastic barrier material? - ANS-
Continuous heat sealer
Which MOP provides waterproof protection against shock and sharp edges? - ANS-
Method 30
You are packaging an item in accordance with Method 54. You need to know the area
of barrier contained in the package. The barrier is 32 inches wide by 88 inches long.
What is the area in square inches? Enter only the number in the field. - ANS-2816
Which three (3) items are required for all MOP 50 submethods?
Select all that apply - ANS-Desiccant
Humidity indicator
Method 50 label
What are hard, cross-grained masses or blemishes in wood called? - ANS-knots
What is an incomplete corner along the edge of a piece of lumber called? - ANS-Wane
(CERT) Exam
You have received items you've never packaged before. Where do you find their
preservation and packaging requirements? - ANS-FLIS database
The FLIS packaging requirements show the item you are packaging has the 4-digit
category code of "ZZ Z Z". This code means the item - ANS-is selective or has special
instructions
An item requires immediate, heat-based drying. Using the approved drying process, you
can either put the item under an infrared lamp or - ANS-Put it in a heated-air oven
When deciding what cleaning process to use, which characteristics of the item do you
need to consider? - ANS-Composition, complexity, and surface finish
Which type of preservative releases vapors that form an invisible protective film around
an item to protect it from corrosion? - ANS-Volatile Corrosion Inhibitors (VCI)
Where would you go to find out which preservative material this item requires? - ANS-
MIL-STD-2073-1 Table J-III
Which type of heat sealer should NOT be used on thin plastic barrier material? - ANS-
Continuous heat sealer
Which MOP provides waterproof protection against shock and sharp edges? - ANS-
Method 30
You are packaging an item in accordance with Method 54. You need to know the area
of barrier contained in the package. The barrier is 32 inches wide by 88 inches long.
What is the area in square inches? Enter only the number in the field. - ANS-2816
Which three (3) items are required for all MOP 50 submethods?
Select all that apply - ANS-Desiccant
Humidity indicator
Method 50 label
What are hard, cross-grained masses or blemishes in wood called? - ANS-knots
What is an incomplete corner along the edge of a piece of lumber called? - ANS-Wane
